Chris Smith Posted April 5, 2020 Author Posted April 5, 2020 38 minutes ago, Belugawrx said: Engine is really looking nice Chris,... looks like you got everything to fit ! Thank you! It’s really funny, I am always wondering if something is going to let go when I get my fat fingers on this.. I am so pleased nothing has gone terribly wrong with it...
Chris Smith Posted April 12, 2020 Author Posted April 12, 2020 I have been working on the rear wing holder/trans cooler/battery. this is my second attempt at this, it comes in two half’s and the seams are terrible. I didn’t catch this until I had it painted and put together. So I stripped it down and put the two half’s together and filled in the seams. I had to modify the mounting tabs for the oil cooler and the frame that hold the battery. its not much to look at until the rear wing gets installed. as always thanks for looking Chris
Chris Smith Posted April 16, 2020 Author Posted April 16, 2020 I didn’t like the kit sway bar links, so I built some.
Belugawrx Posted April 16, 2020 Posted April 16, 2020 Really nice progress Chris ! Are the brake ducts aftermarket?... and if so where did you source them..? Keep it going
Chris Smith Posted April 16, 2020 Author Posted April 16, 2020 2 hours ago, Belugawrx said: Really nice progress Chris ! Are the brake ducts aftermarket?... and if so where did you source them..? Keep it going Yes the brake ducts are aftermarket. indycals has them, shapeways produces’s them
Chris Smith Posted April 19, 2020 Author Posted April 19, 2020 I see that the Admin was a little busy!! So I was a little busy Friday night and Saturday Afternoon. I was a able to get the engine attached to the tub, which to honest was a little nerve racking. After all the work that has been put into the two half’s I didn’t want to mess them up. After getting this milestone completed, I attached the gas tank and all the lines. Then I went onto attaching the radiators and most of the lines to various parts.. there is quite a few pictures. Thank you for looking Chris
Lee Yoder Posted April 19, 2020 Posted April 19, 2020 This build is looking fantastic! Great work. Later, Lee
Belugawrx Posted April 19, 2020 Posted April 19, 2020 Really nice work getting the engine married to the chassis Chris !
Codi Posted April 19, 2020 Posted April 19, 2020 The "sum of its parts" Chris. Looking fantastic now that you've got the bits and pieces joined together. Really makes all your hard work pay off. Betcha' still can't get the grin off your face when you sit down to work on it now. cheers, tim
Chris Smith Posted April 20, 2020 Author Posted April 20, 2020 10 hours ago, Lee Yoder said: This build is looking fantastic! Great work. Later, Lee Thank you!
Chris Smith Posted April 20, 2020 Author Posted April 20, 2020 9 hours ago, Belugawrx said: Really nice work getting the engine married to the chassis Chris ! Thank you sir!! Appreciate it
Chris Smith Posted April 20, 2020 Author Posted April 20, 2020 1 hour ago, Codi said: The "sum of its parts" Chris. Looking fantastic now that you've got the bits and pieces joined together. Really makes all your hard work pay off. Betcha' still can't get the grin off your face when you sit down to work on it now. cheers, tim Thank you sir for the kind words, actually I’m focused on the rear wing and I’m kind of stressing over it
mrm Posted April 28, 2020 Posted April 28, 2020 That is one sharp build. I have built that model, but without all the photoetch. I had to make my steering shaft from brass, because it kept braking the plastic u-joints. I met a guy years ago, who owned the real car. Used to run it before the F1 races at Indianapolis from 2000 to 2005. I met Lauda too. The guy was quite the character. Can' wait to see this finished as it is one of my all time favorite F1 machines ever. Such an iconic car.
Belugawrx Posted April 30, 2020 Posted April 30, 2020 On 4/19/2020 at 9:04 PM, Chris Smith said: Thank you sir for the kind words, actually I’m focused on the rear wing and I’m kind of stressing over it What are you trying on the wing.?
Chris Smith Posted May 1, 2020 Author Posted May 1, 2020 On 4/29/2020 at 6:31 PM, Belugawrx said: What are you trying on the wing.? Well I have a few PE parts to install, and was trying to strip and re paint the chrome to look like polished aluminum. It didn’t go as planned, I have re painted the wing 5 times and was never happy with the shade and shine, or lack of. I tried alclad chrome, polished aluminum and even high shine aluminum. And Molotow twice because I touched it way too soon. And with all the handling and stripping and starting over the detail got sanded away. So I had to get another sprue on eBay. Putting a clear coat on this part has taken a lot of the shine away as I have decals to install. So I’m not trying much ?
Belugawrx Posted May 2, 2020 Posted May 2, 2020 I've had good results with the Alclad Aqua Gloss Clear over their chrome... These pics show medium shine on the real thing Don't get caught up in the polished aluminum,...these guys polish it to a high shine because it's a show car...
Chris Smith Posted May 2, 2020 Author Posted May 2, 2020 1 hour ago, Belugawrx said: I've had good results with the Alclad Aqua Gloss Clear over their chrome... These pics show medium shine on the real thing Don't get caught up in the polished aluminum,...these guys polish it to a high shine because it's a show car... I tried the aqua gloss, was not happy with the results, maybe it’s me ??♂️ I really appreciate you taking the time to post up and share as well Chris
Chris Smith Posted May 2, 2020 Author Posted May 2, 2020 I did have a chance to get some more stuff done on the car. Roll bar and most of the wiring is complete. I do have few little things I would like to do. Thanks again for looking Chris
Codi Posted May 5, 2020 Posted May 5, 2020 Loving it Chris. I have a 1/12th scale kit I'm willing to part with. Just curious, what marques do you like to build and types of race cars? Cheers, Tim
Chris Smith Posted May 5, 2020 Author Posted May 5, 2020 1 hour ago, Codi said: Loving it Chris. I have a 1/12th scale kit I'm willing to part with. Just curious, what marques do you like to build and types of race cars? Cheers, Tim I like all kinds of race cars, I love the history of them and the company’s that build them.. I am a big fan of Ferrari, but I do have a lotus77 and a Mclaren m23. I am eyeing a Ferrari 312pb from model factory hiro. I do wish other companies would make large scale race cars. As a kid I loved doing drag racing models, one of my favorite ones was jungle Jim’s in 1/16 my parents got me for my birthday ! So Tim, what do have in mind sir?
Chris Smith Posted May 9, 2020 Author Posted May 9, 2020 I have decided a long time ago when I started this build, that I will not be attaching any body panels or wheels to this, I have a idea that I hope will work out.. Anyway I did get some color on the side pods today, I hope you like, nothing fancy but it is red?
Belugawrx Posted May 10, 2020 Posted May 10, 2020 15 hours ago, Chris Smith said: Color of choice for this build How do you like the Gravity colours Chris ? Do you use it straight from the bottle..? Keep this going, looking great !
Chris Smith Posted May 10, 2020 Author Posted May 10, 2020 2 hours ago, Belugawrx said: How do you like the Gravity colours Chris ? Do you use it straight from the bottle..? Keep this going, looking great ! I really like using this product, lays down really smooth and it’s ready to spray right from the bottle. I do recommend using gravity color from Europe not US. It has to do with how they run the company.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now