Jump to content
Model Cars Magazine Forum

Recommended Posts

Posted (edited)

...bought for $10 with parts off the trees, a few parts missing, of course, and no numbers as seen in these instructions from https://public.fotki.com/modeltrucks25thscale. I’m wondering what the vinyl tubing representing hydraulic lines would be for, seems like there should be chains holding up the blade instead. Prototype seems to be a Valk unit, only hydraulics should be on the ‘hitch telescope’, as I see it, the ‘trip cylinder’ would be more like a passive shock absorber
spacer.png
Edited by hct728(Bob)
Posted

I have that kit new in the box, if you have any questions, let me know. I can take pictures and show you what things are supposed to look like. I may even be able to cast you a missing part if its small. 

Posted
On 12/7/2020 at 8:52 PM, Oldmopars said:

I have that kit new in the box, if you have any questions, let me know. I can take pictures and show you what things are supposed to look like. I may even be able to cast you a missing part if its small. 

Thanks for the offer, but it's just that things don't fit properly, so it's hard to figure out how they are supposed to go together. There are few locating pins so you have to just guess what AMT intended things to look like. It's coming along now, almost done the building phase

  • Like 1
Posted

Welcome to AMT Junk. However, at this point we are luck to have that. Not a lot of real new kits out there, everything is reissue of the old stuff from many years ago. 

Posted

Definitely a chain to pull the plow up.  And there would not be much vinyl tubing visible.  Small hydraulic cylinders would push the blade from side to side as well as a cylinder to raise and lower it.  I've got some photos also that might help if they are needed.

Posted

Thanks for the info. I will be adding chains and the vinyl tubing and calling it done. Found a drawing but no real hydraulic cylinders visible, though I have seen them mounted underneath for angling the blade. Don't want to go that far. I see the blade is attached lower than I thought, and I'll have to see if I need to re-attach it lower, though I'm anxious to move on to something else!

Valk_Snowplow.JPG

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...