BK9300 Posted September 25 Posted September 25 Mighty ‘fine’ work, Daniel - in all aspects of that word! 1
Straightliner59 Posted September 25 Author Posted September 25 4 hours ago, BK9300 said: Mighty ‘fine’ work, Daniel - in all aspects of that word! Thank you, Brian! It took a minute to get them figured out.
Straightliner59 Posted September 28 Author Posted September 28 I got the other air filter unit assembled. Not much done, beyond that. Work is proceeding on...Thanks for looking! 1
Straightliner59 Posted October 1 Author Posted October 1 The interior floor unit is painted. I got the fuel lines installed. They're not close to perfect, but, they'll be tucked behind the rear bulkhead area thingie, never to be seen again! Next, after the seat's painted, I have to scratch up one of these harnesses. The friend I'm building this for has a little dog, and, she's gonna be riding along, I would assume. She might as well look like a racer. It doesn't look particularly comfortable, but, it looks about as safe as it could be. These pooches don't look thrilled!😂 Anyway...Thanks for looking! 2
Straightliner59 Posted October 7 Author Posted October 7 (edited) I discovered that the air cleaners were too tall for the engine cover to shut. I remembered watching Doug Whyte building his Monogram 904 for the 24 Hour Build, one year, and topping the carbs with screens he punched and domed. I had tried it with woven screen, but didn't care for the result, so, I went with this auto-trans screen. Not too shabby, and the lid will close, now! Next, I dealt with the battery. I found a kit battery (because it already fit, just needing a bit of cleanup, I opted to use it, rather than scratch one), then cleaned it up and added the top details from Evergreen strip. The terminal posts are .030 fly-tying wire (lead free, of course!😀). I made the terminals from 1mm aluminum tube. Cables are from a roll of something I bought, online. I made the tray from flashing, the hold-down post from a .023" brad, and the hold-down "strap" from wire. I was determined to use at least one wing nut, on this thing, so, here we are! Thanks for looking! Edited Saturday at 04:49 PM by Straightliner59 5
BK9300 Posted October 7 Posted October 7 Not fun, with your air cleaners and all that work! Hope you get to recycle your wingnuts - they were a good part of that work. Really like the battery detail workup, too.
Straightliner59 Posted October 8 Author Posted October 8 18 hours ago, Mark W said: Great detail……getting ideas for my 911 project. Thanks, Mark! Looking forward to seeing that! 14 hours ago, BK9300 said: Not fun, with your air cleaners and all that work! Hope you get to recycle your wingnuts - they were a good part of that work. Really like the battery detail workup, too. Thanks, Brian. Both of the air filter assemblies are in my display case, currently. Hmmm...they'd work out, nicely for a Porsche-powered Bug. The clearance could likely be found, there. 1
Straightliner59 Posted Friday at 10:12 AM Author Posted Friday at 10:12 AM The battery is completed. I'm currently working on the doggie harness. This oughtta' be interesting!😄It needs to be there, to personalize the model. Also, I am thinking of trying something with the engine cover. Thnks for looking! 3
Straightliner59 Posted Saturday at 06:55 AM Author Posted Saturday at 06:55 AM 18 hours ago, MeatMan said: Awesome stuff! Thank you, sir!
Straightliner59 Posted Sunday at 12:04 PM Author Posted Sunday at 12:04 PM Except for a bit of touchup, although it isn't a perfect replica of the one above, the pooch pouch is done! Not too bad, I reckon. I used kitchen parchment soaked in diluted white glue, for the main part of the assembly. The straps are my typical wine bottle foil, as are the lap belts. The mesh carrier is a tiny bit of a bag that must have come from some long-ago wedding. It appears to be one of those they put rice or bird seed in. I dry brushed the mesh withsome Humbrol off-white naval color. Thanks for looking! 3
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now