Murphy's Law Posted February 26, 2010 Posted February 26, 2010 I just finished a Peterbilt project and was going to start on my CJ for this build and, as normally happens, the ADD kicks in and... well, you get the idea. Sitting in my build room and was looking through old boxes and ran across a early 70's Firebird that I had built as my first 1:1 (red with a black vinyl top). It was poorly executed and in dire need of a rebuild. As I was separating this from that, the body ended up on top of the interior tub. Dave has a High Roller Chevy Luv going in another thread and inspiration struck: 4x4 Firebird! A little digging turned up a Bronco chassis with complete running gear. A quick test fit and ohhhh-my. Cleaned up the joints and shot some Ford Dark Blue Duplicolor on it. Started trimming out the body and found a couple really nice runs on the passenger side. The ADD kicked in again and we started patch panels, replacement panels, untreated cancer... Then the ADD got ADD and remembered weasel's "how-to" on mud. A couple minutes with some dark brown acrylic (for easy cleanup) and here we are: Haven't thought too much about a motor just yet. Maybe a Hemi? GM body-Ford running gear-Dodge power. How can that go wrong?
Railfreak78 Posted March 9, 2010 Posted March 9, 2010 That Blazer looks great! My 72 pick up was that color. Looks real clean and great job!
Jared Roach Posted March 10, 2010 Posted March 10, 2010 Well guys I'm going to be taking the 81 bronco out of this, because I have other builds that need to get done and plus I have some plans that arn't 4x4 releated, a 5.0 from a 92 mustang and lowered down something like this oh yea. I did finish my cameo though! I just want to make it really cool and the way I want it, since these are hard to find around here.
BigBeze Posted March 12, 2010 Posted March 12, 2010 I put it together the best I could but heres the USA-1 Truck. done earlie but done. I would take 17 place with no problem.
Railfreak78 Posted March 12, 2010 Posted March 12, 2010 I'm calling my 76 Done. I removed some side decals I didn't like but here it is. This kit fought me a lot but I think it looks ok. Wheels and decals are from the 99 Silverado kit. Enjoy!
Murphy's Law Posted March 13, 2010 Posted March 13, 2010 Getting close on this. Found a Chevy 427 out of a '36 Plymouth circle car and wired it up. Interior was repainted gray and black with the addition of ripped seats (typical for a vehicle like this) and a second shifter for the transfer case. Threw some more mud using my nasal spray bottle technique and a tube rear bumper. Still need to cut down the unibody frame from the 'bird to fit and maybe a Nascar fuel cell...
highway Posted March 13, 2010 Posted March 13, 2010 Do you mind if I join in the fun. I started this for another build project last month, and I think the DAF needs some American competition! It is a 1980ish Ford LTL 9000 with Livestock trailer, and YES, there will be cows with it! This is what I have done so far: The custom sleeper is being rebuilt at the moment, it had a tragic accident with the side of the hutch on my desk!
Gray Smith Posted April 20, 2010 Posted April 20, 2010 update time. paint is Tamiya Light Gunmetal, wheels are Aoshima Advan RS...all moldings shaved, strill trying to decide what i'm doing with the grill, hood and tailgate are carbon fibered. Making some progress here.. Thanks for looking.. Gray
Wagoneer81 Posted April 20, 2010 Posted April 20, 2010 (edited) Ok, I'm blind! I just now found this thread! Lotta great ideas here! Jeepster25, where did you get the Cherokee body and the old style, Gladiator nose? I've been looking for both and would love to get ahold of a couple of each! OK, I just fired off a PM to Rolltide expresing my interest in joining this build. It'll give me an excuse to build a '57 Chevy. I'm pretty sure what your first visual image was... trust me, not that '57 Chevy. I want to build a '57 Chevy Suburban. I'll use a Jimmy Flintstone resin body and an AMT 1957 Chevy Stepside for the donor kit: Edited April 20, 2010 by Wagoneer81
Wheels Posted April 22, 2010 Posted April 22, 2010 Here is a current build I'm working on that I hope will be finished soon. I hope it qualifies. I started with the Revell Diecast Tomb Raider Jeep. I scratchbuilt a new rollcage. Instead of putting the rear seat in I added plastruct diamond tread and covered it with BMF. I added a stokes basket, surfboard, flippers & gear bags. I also added a whip antenna, radio and emergency lights on the hood. I stripped the chrome off the wheels and painted them with Tamiya Silver Leaf. Decals came from Lindberg Baywatch Toyota P/U kit. I hope to get more painting done this weekend. Hosted on Fotki Hosted on Fotki
Hornistfuller Posted April 24, 2010 Posted April 24, 2010 would a marmon herrington 4x4 ford woody be fine?
Jeepster25 Posted June 1, 2010 Posted June 1, 2010 (edited) Hey Wagoneer81, I've been away for a few months and just saw your question, I got the Wagoneer body with the Gladiator nose from Race Motor Replicas (RMR). I modifed the Wagoneer body into the Cherokee body because RMR didn't have a Cherokee body yet. Your Chevy Suburban looks like a cool project! Ok, I'm blind! I just now found this thread! Lotta great ideas here! Jeepster25, where did you get the Cherokee body and the old style, Gladiator nose? I've been looking for both and would love to get ahold of a couple of each! OK, I just fired off a PM to Rolltide expresing my interest in joining this build. It'll give me an excuse to build a '57 Chevy. I'm pretty sure what your first visual image was... trust me, not that '57 Chevy. I want to build a '57 Chevy Suburban. I'll use a Jimmy Flintstone resin body and an AMT 1957 Chevy Stepside for the donor kit: Edited June 1, 2010 by Jeepster25
Romell R Posted June 1, 2010 Posted June 1, 2010 This Probably wont quailify but it is my newest build and it is 4X4 LOL!...Hope you enjoy
Guest Mustang3.8 Posted June 1, 2010 Posted June 1, 2010 Well guys I'm going to be taking the 81 bronco out of this, because I have other builds that need to get done and plus I have some plans that arn't 4x4 releated, a 5.0 from a 92 mustang and lowered down something like this oh yea. That's a cool Bronco, Jared. May I ask where that pic was taken? I see it has BC plates. I did finish my cameo though! I just want to make it really cool and the way I want it, since these are hard to find around here.
Jared Roach Posted June 1, 2010 Posted June 1, 2010 I have no clue, just saw it on google, but the bronco dosen't look like that anymore either!
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now