Guest Posted May 30, 2011 Posted May 30, 2011 Here are 2 of mine, I also have a 68 Charger with a 6 and a 71 Duster with a 6 in the works. 41 Chevy Pickup. 1966 Malibu wagon.
Keef Posted May 30, 2011 Posted May 30, 2011 heres mine, sadly it has been taken apart for a different rebuild
FASTBACK340 Posted May 30, 2011 Posted May 30, 2011 Speaking of 6 cylinder powered cars..... Sorry for the semi-hijack here, but I attended a cruise yesterday and this rolled in. It's a Grand Ma fresh `68 Dart 2 dr. post that sounded like it had a healthy V-8 in it. Then he popped the hood:
charlie8575 Posted May 30, 2011 Posted May 30, 2011 No V8 maybe, but a Hyper-Pak Slant-Six is still nothing to sneeze at. Charlie Larkin
Nick Winter Posted May 30, 2011 Author Posted May 30, 2011 That's very cool, and certainley not a Hijack, do you have any pictures of the rest of the car? Nick
FASTBACK340 Posted May 31, 2011 Posted May 31, 2011 That's very cool, and certainley not a Hijack, do you have any pictures of the rest of the car? Nick Of course not! It was a Gold 2 dr. post w/ body colored steel wheels with serious rubber. It had rust coming through the wheel lips & the paint was shot, but the patina was impeccable! Too bad I'm an ^%$#$%^* and never photographed it. If I can get a shot from friends that were there, I'll post it. It really was a sweet old car with all the update money divided between 6 cylinders...
plasticbutcher Posted May 31, 2011 Posted May 31, 2011 Can I play??? here is my Revell 32 2 window with the six from the AMT 50 chevy p/u, I built it to poke fun at my friends who put chevy mills in ford hot rods
FASTBACK340 Posted June 1, 2011 Posted June 1, 2011 That's very cool, and certainley not a Hijack, do you have any pictures of the rest of the car? Nick Look what I found! Not the best shot, but it was all I could get!
FASTBACK340 Posted June 2, 2011 Posted June 2, 2011 it's a beauty And yes, that car had a good-mojo vibe about it. It's ALL THERE... but scruffy. Just a "little" rust... dulled-metallic paint....some bumps & bruises...and a really nice interior. I'll photograph it more the next time. He's a member of Long Island Mopars too. I'm sure I'll see him again. Not to taunt, but you should have heard it....
FASTBACK340 Posted June 2, 2011 Posted June 2, 2011 very cool Dart sedan! if we are talking 1:1 cars, i've had a few 6 powered rides but with the exception of this one, none were really anything to get excited about or worth mentioning really. i just happened to really like this Dart, but i would have liked it alot more with a V8 Is it a `71? Those cars are bulletproof. Besides my Barracuda and the Wife's GTI, we also have a `74 Dart Swinger we use as a beater. Slant 6/ auto/power steering. I left this car buried under 9' of snow for 3 months. I waited until I could open the door, hit the gas 3 times, and the SOB fired right up. I have customer's that can't leave their new Infiniti's for 3 WEEKS without it going dead!
FASTBACK340 Posted June 2, 2011 Posted June 2, 2011 Now, before we're reminded we're straying off topic.... I found another old build from a million years ago with a 6 cylinder I have to dig this out & re-shoot it. It's a Heller BMW Dixie with a 392 Hemi cut down to a V-6
Guest Posted June 2, 2011 Posted June 2, 2011 (edited) My Trumpeter 63 Nova. Edited June 2, 2011 by midnightprowler
Larryhagmansliver Posted June 8, 2011 Posted June 8, 2011 Where are you guys getting all of those distributor cap/wire sets from?
Tumbler75 Posted June 8, 2011 Posted June 8, 2011 Ok, I have a few to add to this. LoL I'm gonna go by year here. 1969 Pontiac Firebird OHC 6 Cylinder Then we move down to a 1975 Dodge Dart w/ the leaning tower of power! Then my 1979 Pontiac Firebird cont....
Tumbler75 Posted June 8, 2011 Posted June 8, 2011 (edited) 1984 Pontiac Fiero Widebody w/ a 2.8L V6 1989 Pontiac Grand Prix SE Coupe 3.1L V6 1992 Mercury Cougar XR-7S Cabrio Concept 3.8L SuperCharged V6! cont..... Edited June 8, 2011 by Tumbler75
Tumbler75 Posted June 8, 2011 Posted June 8, 2011 And then we have a 2005 Chevy Impala LS Kustom 3.8L V6 And we can't forget the 1989 Chevy Beretta w/ a 2.8L V6. This was a replica of my unfaithful BOMB! LoL That's it kids! Enjoy!
BOSWELL891 Posted June 10, 2011 Posted June 10, 2011 Does anyone know any model kits that come with a flathead 6 instead of the regural inline sixes.
Larryhagmansliver Posted June 10, 2011 Posted June 10, 2011 Does anyone know any model kits that come with a flathead 6 instead of the regural inline sixes. If you just need the engine, There's a company called PTX mini-engines that makes very detailed 1/25 die casts and the Ford flathead six is one of them.
Guest Posted June 10, 2011 Posted June 10, 2011 Does anyone know any model kits that come with a flathead 6 instead of the regural inline sixes. AMT's 41 Plymouth has a fairly nice flathead 6 for the kit's vintage. That's the only one I know of.
Shafter44 Posted July 1, 2015 Posted July 1, 2015 The Revell ASA Ford racecars from the early 90's have the circle track version of the V-6. There we 2 or 3 different cars represented if I remember correctly.
Jantrix Posted July 1, 2015 Posted July 1, 2015 I have three. 37 Chevy 39 Chevy And a 2JZ powered AMC Pacer WIP
Tonioseven Posted July 1, 2015 Posted July 1, 2015 I don't have any completed pictures of it but here's my '51 Chevy
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now