Stingray69 Posted June 16, 2006 Share Posted June 16, 2006 Well this my current project. Pretty much all scratchbuilt except for the engine, tires/wheels, the original body. The frame, wing, front suspension, seat, the small cowl hood scoop, wing, were all scratchbuilt with styrene or brass. The body was stretched to meet the longer wheelbase. http://freewebs.com/lumpysspeedshop Quote Link to comment Share on other sites More sharing options...
Wildrice Posted June 16, 2006 Share Posted June 16, 2006 One wicked looking ride. How is that Ross Gibson engine? Quote Link to comment Share on other sites More sharing options...
MrObsessive Posted June 16, 2006 Share Posted June 16, 2006 Nice!! That'll definitely be a showstopper when done! :wink: Quote Link to comment Share on other sites More sharing options...
Steve H. Posted June 17, 2006 Share Posted June 17, 2006 Awesome! You've got a ton of work in that already, Can't imagine how much more you have to do! You Race Car Guys are nuts! Quote Link to comment Share on other sites More sharing options...
PatRedmond Posted June 17, 2006 Share Posted June 17, 2006 HOLY S*** !! Too much ! Quote Link to comment Share on other sites More sharing options...
Stingray69 Posted June 17, 2006 Author Share Posted June 17, 2006 Thanks Guys Wildrice this new RG engine is awesome, definitely one his best. The only thing I didn't like were the headers. I still have a crapload of work left... but hey thats half the fun I'll keep you guys posted! Quote Link to comment Share on other sites More sharing options...
Mal.au Posted June 17, 2006 Share Posted June 17, 2006 I think there might have to be a new section on the message board possibly "Beware Master piece in progress" or "prepare to be amazed" or "Hope you have plenty of memory to save the pics" Or maybe "throw your hands in the air it's time to give up" Hey Tommy what are the diameters of the brass tube you are using? Quote Link to comment Share on other sites More sharing options...
bjscustommodels Posted June 17, 2006 Share Posted June 17, 2006 lookin good tommy Quote Link to comment Share on other sites More sharing options...
Stingray69 Posted June 18, 2006 Author Share Posted June 18, 2006 I think there might have to be a new section on the message board possibly "Beware Master piece in progress" or "prepare to be amazed" or "Hope you have plenty of memory to save the pics" Or maybe "throw your hands in the air it's time to give up" Hey Tommy what are the diameters of the brass tube you are using? Thanks man! For the brass I'm using 1/16" tube for the main portions and then for the bracing I'm using 3/64". When you scale it up its the closest to the real thing. All modern drag cars use 1 5/8" for the main portions of there frame. When you scale up 1/16" will equal 1 1/2" Yes I'm picky Heres a small tutorial I made on how I solder brass. I know theres other ways but this mine. http://www.modelcarsmag.com/forum/viewtopic.php?p=2577#2577 I'll have some updates later tomorrow or monday! Quote Link to comment Share on other sites More sharing options...
Stingray69 Posted June 28, 2006 Author Share Posted June 28, 2006 Well here's the latest! I added some brackets for the four links on the back... they are scratched out of brass. I washed the frame so thats why there is water drops in a few spots The rear end I got not too long ago... its a peice from Top End Miniatures. The four links were scratched from aluminum tubing and metal rod. I'm getting some rod ends from a small company call RB Motion.. they will attach to the end of the four links and hook up to the brackets on the frame. I wanted to lay a thin coat primer on the frame.. here are some pics of that. If I need to add more bars the primer is thin enough to peel off so soldering more on isn't problem. I'm getting some sheet brass this week so I can do the tubs, door panels, firewall, floor, etc... Quote Link to comment Share on other sites More sharing options...
bstone Posted June 28, 2006 Share Posted June 28, 2006 Looks great, do you build pro mod frames for sale. Quote Link to comment Share on other sites More sharing options...
MrObsessive Posted June 28, 2006 Share Posted June 28, 2006 Tommy, that is simply AWESOME!! One question though..........What type of solder do you use to keep the joint from remelting when an adjacent joint is soldered? I train folks at work in soldering.............are you using different temp solders? If so, can you give me the temp degree of solder(s) your using? I use a Metcal unit at home (also at work) and in the past at work we have used a type of "Eutectic" solder which may be what you're using to have the joints from remelting. Any help would be appreciated! Keep up the awesome work!! Quote Link to comment Share on other sites More sharing options...
ScrappyJ Posted June 29, 2006 Share Posted June 29, 2006 Looking good Tommy! Quote Link to comment Share on other sites More sharing options...
Stingray69 Posted July 5, 2006 Author Share Posted July 5, 2006 Thanks all! Bill I'm using standard Rosin Core solder I got at hobby shop... nothing special about it... I rarely if ever have a problem with a joint remelting. I only lay the iron down for maybe two or three seconds... most of the time the already soldered joints don't heat up that quick. If you use torch I can almost asure you you'll have joints remelt but with only 35watt iron its rare uless you have another joint super close to the being soldered. If you want the best though go with some silver solder seems to work the best in these cases because it takes more heat to melt... The reason I don't use it is I can't find it in my area and it tends to be expensive. Well here's somewhat of an update.. more like a step backwards. I had to make a mod on the frame for 100% accuracy.... After taking some measurements I noticed that my seat and seat area was way too narrow for any driver to fit. On most pro mods the top framerail will bend in to make for more room. So I said my prayers and started bending! All went well... A new f/c cage was made for once again accuracy and room for the fantasy driver. I also scratchbuilt a new seat for it as well. Has some curve to it for the what would be drivers shoulder area. I also layed down some paint... the color is Model Masters Steal... looks like that will be the main color for the frame. The control arms will be chrome silver to simulate chromoly. I also have changed my plans with the engine.... I'm going with a blown "Semi" Hemi... which is a Chevy Hemi! A blower shroud will be made for the hood area. Here are the pics: Heres a pic of the real frame, notice how the top rails bend in. I only did the drivers side on mine. I'll finally start the tub work tomorrow! Quote Link to comment Share on other sites More sharing options...
Stingray69 Posted July 16, 2006 Author Share Posted July 16, 2006 Ok well heres a big update: I finally got tubs in and a floor... there are still panels to be made obviously to complete the tubs and metal work. Everything fits pretty good...no gaps. Next week I should pick up the pace some... there is still a crapload of work left, lol... but I love it! I know it seems far a way now but I would like this one done by Dec. 1st. I was doing a quick mock up today to check the stance and stuff and I finally decided the original wing was not doing it for me... you guys might of liked it but for me it really didn't show my best work. So I ripped it off in frustration and made myself something a little more innovative. This is what I came up with... I like it much better. The cool thing is is it really works too. I made it so the center could move.. There is still some clean up work left.. Heres a quick video of it in action! http://s72.photobucket.com/albums/i175/Sti...nt=MVI_1142.flv Back to metal work now, lol! Quote Link to comment Share on other sites More sharing options...
MrObsessive Posted July 16, 2006 Share Posted July 16, 2006 Now that is slick! Comin' along real nice there! Quote Link to comment Share on other sites More sharing options...
Stingray69 Posted July 19, 2006 Author Share Posted July 19, 2006 THE ENGINE HAS ARRIVED! Here she is... ALL METAL, the parts are great, fit is great, the whole friggin thing is great! It also came with pulleys, a belt, and a prewired magneto. I'm in love with it. I need to make a quick trans swap later... remember this is a t/f engine so the trans is a no can do. Now since this a blower it'll need a blower shroud which I ordered from TEM already... so say goodbye to that little wimpy cowl induction scoop. Quote Link to comment Share on other sites More sharing options...
MrObsessive Posted July 19, 2006 Share Posted July 19, 2006 Tommy, you're gonna set the competition table on FIRE with that one! This'll definitely make the mags for sure when done!! Quote Link to comment Share on other sites More sharing options...
Stingray69 Posted August 13, 2006 Author Share Posted August 13, 2006 The firewall is now 100% complete. Overall it is made up of 14 individual pieces. Real tig welds were simulated through out the whole firewall, they show up better under paint especially the steel color. The center piece of the firewall may look strange to some so let me explain.... The bell housing will bolt onto the front piece of the firewall where the small hole is and when I say bolt I mean I'm actually using tiny nuts and bolts... on the other side the 3 speed trans will bolt on to that side, a small shaft will ensure the two pieces line up. I ordered a new airbrush as well just to paint this project! Should arrive next week, until then nothing is getting painted except for some quick coats of primer. I haven't had much time to work on this, the last couple days here have been just way to nice to sit inside and model. 2 Weeks ago I added a blower shroud. This was an idea I had for another project about year ago. I took a L88 scoop off a 69 Vette and then just molded into the front clip. I only want the blower scoop exposed like on Jim Oddy's Pro Mods Not sure if I already said this here... but I plan on replicating EVERY detail on a real pro mod car from a parachute lever to a chassis certification sticker. I know it looks kind of empty right now but get ready! If it ever gets done I'm hoping to get into the mag. Quote Link to comment Share on other sites More sharing options...
ismaelg Posted August 13, 2006 Share Posted August 13, 2006 That is certainly coming along looking absolutely GREAT! Keep us posted om the progress! Thanks, Quote Link to comment Share on other sites More sharing options...
ronr Posted August 13, 2006 Share Posted August 13, 2006 WOW! That is turning into one Badto the Bone Nova. All the detail is amazing. Thumbs up on this wild ride Tommy. Ron Quote Link to comment Share on other sites More sharing options...
Wildrice Posted August 14, 2006 Share Posted August 14, 2006 Awesome stuff Tommy. That chassis is off the hook. I don't think you will have any prob getting it in a mag. Quote Link to comment Share on other sites More sharing options...
walt francis Posted August 15, 2006 Share Posted August 15, 2006 Show stopper for sure!!!!! Quote Link to comment Share on other sites More sharing options...
bluemoose Posted August 15, 2006 Share Posted August 15, 2006 Amazing workmanship! Quote Link to comment Share on other sites More sharing options...
Stingray69 Posted August 16, 2006 Author Share Posted August 16, 2006 Well heres the near completed fuel/oil tank. Thanks to info from a friend of mine who works on real pro mods, I was able to kill two birds with one stone. I was told on newer pro mods they just make one huge tank and split inside. Its pretty much done all I need is a cap setup for the oil, just like the fuel one. I really loaded up on the solder inside the tank to avoid any leaks Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.