Cato Posted October 22, 2012 Share Posted October 22, 2012 I offer this as a point of information only-not criticism. The following was decanted from a fresh can of Model Master Enamel Top Coat #2936. It is shot in natural room light against a white backdrop. Gassed-out and stored in a clear glass bottle. Now I know there are a lot of different clears in lacquer, enamel and acrylic. Many are called 'water clear'. This one is not. I'm using it on a dark color but would not atop whites or yellows. Surely it adds tint. See for yourself: Quote Link to comment Share on other sites More sharing options...
Monty Posted October 22, 2012 Share Posted October 22, 2012 No offense, but this isn't exactly breaking news. Testors' original (lacquer) clear was known for making white paint look more like ivory, and apparently they haven't improved anything since. With a little bit of searching you should be able to find some threads about which clears work best over various paints. One of our now-banned members had a post a couple years ago regarding some kind of clear he'd found at Hobby Lobby that allegedly worked over overything, but unfortunately banned members' posts disappear when they do. Quote Link to comment Share on other sites More sharing options...
Cato Posted October 22, 2012 Author Share Posted October 22, 2012 I didn't imply this was breaking news-just offered a visual example of the material itself. Sorry if I've posted the obvious. One could simply shoot Future and have no worry. Quote Link to comment Share on other sites More sharing options...
Monty Posted October 22, 2012 Share Posted October 22, 2012 Didn't mean to harsh your buzz, I just assumed that this was common knowledge by now. I happened to learn about it over a decade ago when my local hobby shop offered bottles of Testors "clear" for airbrushers. That stuff looked like the amber fluid you find prehistoric bugs trapped in, and I recall feeling disappointed that a company like Testors couldn't do better. Future has a number of adherents on here as well as the occasional detractor. Sounds like it's tricky to airbrush and I can't fathom trying to put it on with a brush, but several others have learned to apply it perfectly. I'll see if I can't track down the name of the Hobby Lobby stuff that's supposed to be very clear and work with any paint. Quote Link to comment Share on other sites More sharing options...
Cato Posted October 22, 2012 Author Share Posted October 22, 2012 I'll see if I can't track down the name of the Hobby Lobby stuff that's supposed to be very clear and work with any paint. That would be helpful and cool. Quote Link to comment Share on other sites More sharing options...
Chief Joseph Posted October 23, 2012 Share Posted October 23, 2012 Ya'll may be thinking about JW Etc Varnish. I use it for some clearcoating on non-auto models and it works very well. Quote Link to comment Share on other sites More sharing options...
CadillacPat Posted October 23, 2012 Share Posted October 23, 2012 Didn't mean to harsh your buzz, Harsh Your Buzz, Man, haven't heard that for awhile. What ever happened to Pauly Shore????????? Heyyy Buuuuuuuuddddddy!!!!! CadillacPat Quote Link to comment Share on other sites More sharing options...
Monty Posted October 23, 2012 Share Posted October 23, 2012 Harsh Your Buzz, Man, haven't heard that for awhile. What ever happened to Pauly Shore????????? Heyyy Buuuuuuuuddddddy!!!!! CadillacPat Terrible choice of words on my part. In all actuality, I'm the furthest thing from that type of person you'll ever meet. I should've just told Cato I wasn't intentionally trying to whizz all over his thread. That said, I know you currently only use real HOK paints, but do you recall ever using any clear that worked well over enamels and lacquers? And Pauly Shore should apologize to the universe just for being Pauly Shore. Quote Link to comment Share on other sites More sharing options...
Cato Posted October 23, 2012 Author Share Posted October 23, 2012 Terrible choice of words on my part. In all actuality, I'm the furthest thing from that type of person you'll ever meet. I should've just told Cato I wasn't intentionally trying to whizz all over his thread. And Pauly Shore should apologize to the universe just for being Pauly Shore. Moi aussie. We cool Dude... Quote Link to comment Share on other sites More sharing options...
CadillacPat Posted October 23, 2012 Share Posted October 23, 2012 Terrible choice of words on my part. In all actuality, I'm the furthest thing from that type of person you'll ever meet. I should've just told Cato I wasn't intentionally trying to whizz all over his thread. Cmon Monty, you used it so naturally there must be just a little bit of Pauly in there somewhere. I liked it, and it was actually the best and most polite interruption I have seen here recently. That said, I know you currently only use real HOK paints, but do you recall ever using any clear that worked well over enamels and lacquers? Well, many will work (shelf Aerosols) as far as laying down, but over time they all yellowed. In the DieCast Customizing world people who Rattlecan use a lot of Krylon Triple Thick Clear and say they like it. Like you said, I found a product that always works and never disappoints, HOK Urethane Clear, and for those who want to save and get the same results, Try this Clear also by Valspar, With this Reducer and Catalyst, CadillacPat Quote Link to comment Share on other sites More sharing options...
sportandmiah Posted October 26, 2012 Share Posted October 26, 2012 Cadillacpat, how do you keep your activator from hardening? How much did the above pictured cost? Quote Link to comment Share on other sites More sharing options...
CadillacPat Posted October 28, 2012 Share Posted October 28, 2012 Cadillacpat, how do you keep your activator from hardening? I buy a Quart ( you can buy Catalyst in smaller Pints) and pour 6 ounces or so into a smaller container. This way I'm only opening and closing the smaller amount and the larger amount remains sealed. I use empty BarBeCue Sauce bottles for this, Here's an old thread about Paint Bottles, Paint Storage I purchase most of my House Of Kolor paints by the Gallon or Quart. Rather than constantly reopening the large containers I came upon this method to store my paints for easy daily use. I needed containers that were cheap and easy to pour from. These soft, squeezable small mouthed plastic bottles pictured here work perfect for me. They consist of the type plastic that is not reactive to solvents so any type paint or related solvent based products can be stored in them. I fill them with paint directly from the can for daily mixing and some of the bottles contain reduced paint of colors that I use frequently. HOK Urethane Clear, 311 Reducer, Catalysts (both Clear and Candy Activator), InterCoat Clear, Lacquer Thinner, Primer and a variety of Basecoats. The small mouth makes for easy pouring for mixing or even for transferring mixed paints into a 1/4oz. paintcup. The same small mouth also allows for less exposure to the air when opened. Pure strength paints or premixed, these lightweight smaller containers make for easy handling resulting in less mess and waste. If you have a project that you'll be painting all day these bottles are perfect for use as a mixing container. I Barbecue or Grill frequently, at least twice or three times a week and throwing away so many Barbecue and Ketchup bottles made me wonder if they couldn't be put to use. There had to be a better cheaper way to store paints than spending money on glass bottles from the Container Store. It turned out that these type Polyethylene or Polypropylene low-density plastics were non reactive to solvents. Even if you dump the sauce within, these proucts routinely go on sale at Food Stores for as low as 44 cents, usually 66 cents, making for a very cheap buy. Just wash the threads of the Cap and Bottle thoroughly. Fill half way with water, shake, shake, shake, repeat, repeat, then add a couple of drops of dishsoap, fill, shake, rinse, rinse, rinse and let dry. Run hot water over the labels, remove them and using a permanent marker indicate what you've stored in the container. Or make your own label. If premixing or if filling with Clear or Catalyst, mark the date filled. I do a whole lot of paint mixing and paint transfering, so while I don't paint full size cars these containers hold just the right amounts of paint for me. They're fine if you're doing Artwork or anything smaller than a car or large motorcycle parts. They are cheap enough that by the time you have emptied the container you can just toss it and use a fresh one. How much did the above pictured cost? Prices can easily be found using Search on Google, Gallon Clear is $55 Quart Catalyst is $37 Quart Medium Reducer 172 is $16 CadillacPat Quote Link to comment Share on other sites More sharing options...
martinfan5 Posted October 28, 2012 Share Posted October 28, 2012 $108 for all that, how long, or better question, how many bodys can you clear coat ?, for 1/24th/25th scale Quote Link to comment Share on other sites More sharing options...
CadillacPat Posted October 28, 2012 Share Posted October 28, 2012 $108 for all that, how long, or better question, how many bodys can you clear coat ?, for 1/24th/25th scale That's not something that can be accurately predicted just by the total amount of ounces. Martin I suggest you add up the amounts of Clear, Catalyst and Reducer that it normally takes you to Clear a 1/24 and divide it into the total ounces of the Gallon and a half of products pictured in my reply. Those of us that AirBrush all do it slightly differently. Stored properly and transferred to smaller containers for daily use, these products can haved a very long shelf life, even years of use. CadillacPat Quote Link to comment Share on other sites More sharing options...
martinfan5 Posted October 28, 2012 Share Posted October 28, 2012 I was just curious if its something that is worth while in the longer run with the high upfront cost, but I am sure it would be Quote Link to comment Share on other sites More sharing options...
CadillacPat Posted October 28, 2012 Share Posted October 28, 2012 (edited) I was just curious if its something that is worth while in the longer run with the high upfront cost, but I am sure it would be "Worthwhile" would depend on the Builder's dedication to the quality of his finished project. The good thing about using high quality products is they cost so little for the individual use. The "longer run" for me is to build the best I can. Urethane Clearcoats are always superior so that makes it worthwhile for me. For you guys that are AirBrushing you can buy the above products in Quarts and Pints which are probably more correct amounts to go along with how often you Build. Or, do as I did and Network with other Customizers or Builders. Put a deal together with a few other Customizers and split everything up. Surely anyone can find 4 or 5 other people to put a deal together with. Everything goes ground shipping. Done deal. CadillacPat Edited October 28, 2012 by CadillacPat Quote Link to comment Share on other sites More sharing options...
Guest G Holding Posted October 28, 2012 Share Posted October 28, 2012 $108 for all that, how long, or better question, how many bodys can you clear coat ?, for 1/24th/25th scale Do not forget your PPE. Suit, gloves, and respirator..change you cartridges every 6mos or as needed. These paints are deadly without proper safety equipment. Quote Link to comment Share on other sites More sharing options...
Mr Dedo Posted October 31, 2012 Share Posted October 31, 2012 if the finished paint is enamel i could understand the use of an enamel seal coat have you tried working with lacquer sprays from testor, the clear krylon sprays and/or omni two part urethanes through an air brush Quote Link to comment Share on other sites More sharing options...
Chas SCR Posted October 31, 2012 Share Posted October 31, 2012 I do the close to the same as Cad does, But I buy mine in quart size and this last up to a year or better ( I change mine out at the year date no matter what) This is to keep it fresh and I normaly have about 16oz or so left. For keeping the Catl fresh not sure how they package there stuff but the new one from DuPont has a two style cap that does not let the air build up get in side to ruin it. I use Dupont 7900 with the 4600 activator and both together cost $79, Or you can stay with the 7900 with the 7900 Act for $108 or go cheeper and have the 4600 nason all for $36 and that is a Quart size of each. Quote Link to comment Share on other sites More sharing options...
Cato Posted October 31, 2012 Author Share Posted October 31, 2012 You guys that use 2 stage stuff-what type masks do you wear? I have a DuPont with two double filters per side. Anybody use an air tank? Quote Link to comment Share on other sites More sharing options...
Chas SCR Posted October 31, 2012 Share Posted October 31, 2012 Not for modeling I do not wear a mask. Controal the air at less then 12psi coming out of the airbrush and if you have good paintbooth that is vented right you will never smell it at all. It's not like shooting a real car or the size of a hood or door! The thing to be more carefull about is not getting any on your skin then any thing. Quote Link to comment Share on other sites More sharing options...
Cato Posted November 1, 2012 Author Share Posted November 1, 2012 I'm not well set-up I don't have a booth. I use my empty 2 car garage which fills with mist pretty often. The filters are always the color I'm shooting. I then blow them out and replace them every year or so. I never get paint odor with them on. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.