geetee66 Posted January 13, 2013 Posted January 13, 2013 (edited) I got my inspiration from the www.1948chevy.com website. A good resource if you're going to build one of these. I liked this kit, despite some warp in the floor/chassis and the metal transfers had weak adhesive. Apart from that, it was a fun challenge. I tried my best for a good paintjob. i used a lot of clear and wet sanded it before 3 stages of polishing. BMF was tricky as the lines were feint, but after a bit of sweat and frayed nerves, I got it done. I wired the plugs, added fuel lines, battery cables and swapped the kit wheels for some lowrider rims from Pegasus. I got the ride height as low as I could without chopping up the chassis and floor. I admit i wasn't feeling brave enough to risk ruining the kit as it was a gift from someone special. I decided it needed a pimped interior, so it now has glittery seats and a white flocked carpet. The windows were replaced with acetate, as the kit glass was scratched despite never having been out of the bag(??) and the windshield glass had a prominent bubble inside the styrene, so that was binned. Thanks for looking I hope you like it Got the images sorted now. Thanks to all who gave me tips and advice. Much appreciated Edited January 14, 2013 by geetee66
Guest G Holding Posted January 13, 2013 Posted January 13, 2013 (edited) I just posted your links into the image box ?? Edited January 13, 2013 by G Holding
farmer1 Posted January 14, 2013 Posted January 14, 2013 That's really nice, looks super clean and well done !
geetee66 Posted January 14, 2013 Author Posted January 14, 2013 Thanks Greg I normally get this stuff right, but I don't see an image box. Do you mean the 'Attach Files' thing at the bottom of the page?
Mike_G Posted January 14, 2013 Posted January 14, 2013 (edited) Just need to type and /img (also enclosed in brackets) before/after the pic's url Nice build btw. Edited January 14, 2013 by Mike_G
sjordan2 Posted January 14, 2013 Posted January 14, 2013 Just need to type and /img (also enclosed in brackets) before/after the pic's url Nice build btw. Huh? Please give an example of what such a link would be based on the links he provided. And yes, geetee66, you can post images directly from your computer using the attachment feature in Use Full Editor or More Reply Options.
Guest G Holding Posted January 14, 2013 Posted January 14, 2013 Thanks Greg I normally get this stuff right, but I don't see an image box. Do you mean the 'Attach Files' thing at the bottom of the page? Nope....Go to the full reply mode and 1/2 way across the second line is a box with a small green box in it , when you hover over it it will say IMAGE click on that and paste the line you posted in the box. You can do this multiple times....
sjordan2 Posted January 14, 2013 Posted January 14, 2013 (edited) Let's see... I went to my Fotki folder, copied the url below, posted it into the forum's image box and got a message saying I'm not allowed to use that extension on this forum... http://public.fotki.com/sjordan47/mcm-album/bill-the-cat.html Then I tried it by typing before and after the complete link above with the same result. Edited January 14, 2013 by sjordan2
Guest G Holding Posted January 14, 2013 Posted January 14, 2013 Look for this when you click the small icon
Guest G Holding Posted January 14, 2013 Posted January 14, 2013 (edited) Let's see... I went to my Fotki folder, copied the url, posted it into the forum's image box and got a message saying I'm not allowed to use that extension on this forum... http://public.fotki.com/sjordan47/mcm-album/bill-the-cat.html Then I tried it by typing before and after the complete link above with the same result. for a picture you need the jpg link not the html (the html will show the entire album page ) plus the picture and is not a image extension Edited January 14, 2013 by G Holding
Mike_G Posted January 14, 2013 Posted January 14, 2013 Huh? Please give an example of what such a link would be based on the links he provided. http://images57.fotki.com/v512/photos/7/2403537/11527624/428-vi.jpg /img Need to enclose the "/img" in brackets
Gluhead Posted January 14, 2013 Posted January 14, 2013 Beautiful Fleetline. I had to goof around a little to find the proper means to post images here, from fotki. Go to the fotki image you want to post, and, cursor on the image, right click>copy image url. That's the link that you want to post in the field you get when you click on "Image" here. Oh, and remember to hit enter twice after it accepts the image link. That will give you one blank line between images, or to separate your image from any text which follows.
geetee66 Posted January 14, 2013 Author Posted January 14, 2013 Here are some shots of the engine, interior and underside.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now