JamesW Posted January 14, 2013 Posted January 14, 2013 I want a mild lift but don't want to use leaf springs in the front. Any ideas?
JamesW Posted January 14, 2013 Author Posted January 14, 2013 Not much. Maybe just a little higher than stock. Would like to do a detailed 4x4 but I'm not sure what's available that would work for that year truck.
Joe Handley Posted January 14, 2013 Posted January 14, 2013 Quick and dirty, move the mounting pins closer to the end of the spindles then mount them so that end is closest to the lower arms. That should give the equivalent of a budget boost, anything more will probably require at least cutting loose and repositioning the arms so they're pointed downward some. After that would be to fab up your own arms and spindles for more lift than that.
JamesW Posted January 14, 2013 Author Posted January 14, 2013 I had thought of that. What about 4x4 running gear? Any ideas? I've got a transfer case, but what about the half shafts and differential? How could I do those with the way the kit suspension is?
Joe Handley Posted January 14, 2013 Posted January 14, 2013 I had thought of that. What about 4x4 running gear? Any ideas? I've got a transfer case, but what about the half shafts and differential? How could I do those with the way the kit suspension is? I'd find one of the Revell '99-'02 style Silverados, I think that is still the same basic inferior front suspension design as what first disgraced the dealer lots for '88.
greymack Posted January 14, 2013 Posted January 14, 2013 Hi there just wondering if you thought of doing a body lift?That would lift it and doing it the easy way too.
JamesW Posted January 14, 2013 Author Posted January 14, 2013 A body lift is an option, but I don't think the AMT chassis would look right since the floors are molded to the frame.
Joe Handley Posted January 14, 2013 Posted January 14, 2013 He would have to remove the pans from the chassis to make it look right. IIRC, a minor suspension lift, minor body lift, and ditching the 16x7's for deep offset 15x10's and wide 31"-33" tires was a big deal on those back in the day
Longbox55 Posted January 15, 2013 Posted January 15, 2013 I'd find one of the Revell '99-'02 style Silverados, I think that is still the same basic inferior front suspension design as what first disgraced the dealer lots for '88. The Revell '99 kit is 2wd too. The closest 4x4 suspension you'll find that is correct for the '88-'98 will be the AMT Tahoe snap kit, but it is molded to the chassis. I seem to recall that there is a resin caster that offers a casting of of it, though. Alternatevely, you could use the susension from the Fujimi Astro van, which is heavily based on the GMT400 4x4 suspension. The steering linkage would have to altered, but the control arms, splindles, and axle center section and 1/2 shafts could be used intact.
sstacey47 Posted January 15, 2013 Posted January 15, 2013 You might check with Truckaddict on here,i casted a front axle for him and i'm pretty sure that what the axle is for.I do have the mold if you need one.Thanks Sean
Joe Handley Posted January 15, 2013 Posted January 15, 2013 The Revell '99 kit is 2wd too. The closest 4x4 suspension you'll find that is correct for the '88-'98 will be the AMT Tahoe snap kit, but it is molded to the chassis. I seem to recall that there is a resin caster that offers a casting of of it, though. Alternatevely, you could use the susension from the Fujimi Astro van, which is heavily based on the GMT400 4x4 suspension. The steering linkage would have to altered, but the control arms, splindles, and axle center section and 1/2 shafts could be used intact. They made a 4wd one too, I should have one at home come to think of it........
Longbox55 Posted January 15, 2013 Posted January 15, 2013 All the Revell Silverados I've seen were 2wd. I do know that the early issues of the kit show a 1:1 4x4 on the box, as did the original catalog picture (in fact, the catalog showed a standard cab longbed 4x4). That is the version I have, but the kit in box is definitly a 2wd.
JamesW Posted January 15, 2013 Author Posted January 15, 2013 Thanks for all the help guys. I have a front end (half shafts and differential) from the 96 blazer that I might be able to make work.
milo1303s Posted September 20, 2024 Posted September 20, 2024 Any one ever resin cast this or 3d print the 4x4 frontend for the early 90's Chevy sportside pickup???
obs.caleb Posted March 26 Posted March 26 (edited) On 9/19/2024 at 8:28 PM, milo1303s said: Any one ever resin cast this or 3d print the 4x4 frontend for the early 90's Chevy sportside pickup??? No I Believe There Is Currently Not A 4x4 Frontend For that kit Edited March 26 by obs.caleb
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now