Bruce Poage Posted April 2, 2014 Share Posted April 2, 2014 Soon be diving into a late fifties custom and thinking about going with simulated tuck and roll interior. I have purchased some half round plastic for that purpose. The question is procedure from here. Do I glue the half round directly onto the existing seats or do I cut out the portion of the seat that is to be tuck and roll and then replace it with the half round. Suggestions appreciated. Quote Link to comment Share on other sites More sharing options...
slusher Posted April 2, 2014 Share Posted April 2, 2014 I would think glue it to the seats. I have seen it done before but a picture would be helpful to see what you have... Quote Link to comment Share on other sites More sharing options...
my80malibu Posted April 2, 2014 Share Posted April 2, 2014 At minimum sanding down the area may be required. But removal of the part that you would want pleated, then replaced with a backup section to glue the pleats to would be a easier to shape Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.