Header Help. Please!

[JPolli]

Might anyone know of a kit or aftermarket place that might have headers like these? Thank you in advance.

Jim

[JunkPile]

You could build them from scratch. Should be easy enough and would fit your application exactly.

Good luck

good

[Snake45]

I think the AMT '53 Stude has something similar. They might be a little longer but of course you could cut them.

http://public.fotki.com/drasticplasticsmcc/mkiba-build-under-c/amt-instructions/automotive-cars--pi/studebaker/amt-1953-studebaker/11.html#media

[Ace-Garageguy]

Building your own guarantees a perfect fit, but Mr. Snake is also right on. This shot of the AMT '53 Stude instructions shows one side of the headers...

...and here are 6 of those pipes used to plumb the exhaust on an inline engine...very possibly a decent starting point for what you need.

(photos taken from open internet sources under "fair use" definition in copyright law)

[dimaxion]

Yes , these are the same type as in the Studebaker kit . An alternative would be making these from Solder or wire one by one . I have these from the Stud kits . PM me , we can trade .. Thanx ..