afx Posted November 19, 2014 Share Posted November 19, 2014 (edited) I am going to take a shot at building the old Esci kit. While doing research I stumbled across an excellent build by Petri Huhtala. Here is a link to his Fotki album of the build. I will utilize many of his ideas as well as a few of my own. I am still trying to decide on the livery. Edited April 11, 2018 by afx Quote Link to comment Share on other sites More sharing options...
afx Posted November 20, 2014 Author Share Posted November 20, 2014 Here is the kit I am starting with. It is a pretty simple kit but with effort I think it can be built into a nice replica. Quote Link to comment Share on other sites More sharing options...
afx Posted November 20, 2014 Author Share Posted November 20, 2014 (edited) As with any kit of this age there is lots of cleanup as well as fitment issues. The first one I will tackle is the hood. As you can see with the hood pushed all the way to the left the large gap that exists. This won't do. I will close this gap up using .060 angle. I filed the inside edge of the fender to create a nice sharp edge. I then attach the angle with the vertical leg projecting just above the fender. Once it has setup I use a small flat file to trim the angle to the top of the fender. I finish it off with an 1800 grit sanding pad. In addition to closing the gap the horizontal leg of the angle creates a nice ledge for the hood to rest and brings it into plane with the top of the fender. Edited April 28, 2015 by afx Quote Link to comment Share on other sites More sharing options...
hjracing Posted November 20, 2014 Share Posted November 20, 2014 Great start! I'll keep an eye on this one! Quote Link to comment Share on other sites More sharing options...
jrherald420 Posted November 20, 2014 Share Posted November 20, 2014 Good start! Quote Link to comment Share on other sites More sharing options...
MBXPilot Posted November 20, 2014 Share Posted November 20, 2014 Awesome!! Old British Escorts are among some of my favorite cars. This is shaping up to be a great build for sure! I can tell already that your attention to detail is phenomenal Quote Link to comment Share on other sites More sharing options...
afx Posted November 21, 2014 Author Share Posted November 21, 2014 (edited) There was always something that didn’t look quite right to my eye about the rear flairs on the kit. I have heard many people say that the flair should not extend above the body crease. Yes there are versions of the car with the top of the flair below the belt line. However there are also versions with it extending above the belt line. So that wasn’t it. After studying many photos of the 1:1 car I think I figured it out. The top of the rear wheel well on the kit is too low. If you draw a line through the apex of the wheel wells it should be parallel with the belt line. You can see this in the photo on the bottom unaltered car. The car on top I have raised this apex about 1mm (one scale inch) to bring the lines parallel. Its subtle but I think it makes a big improvement. Edited November 21, 2014 by afx Quote Link to comment Share on other sites More sharing options...
jbwelda Posted November 21, 2014 Share Posted November 21, 2014 nice eye for detail! is this kit the same as the clear-view clear plastic body one? sure does look similar. jb Quote Link to comment Share on other sites More sharing options...
stitchdup Posted November 21, 2014 Share Posted November 21, 2014 Its shaping up well, and I'll be following with interest. I just built this kit and you will find the suspension to sit too far forward at the front and the rear needs a little work to fit as the pins for fitting it to are about 3mm too long so the springs won't fit properly. Also if you use the photoetch kit the bonnet/hood piece is fitted the opposite way to what the instructions say otherwise it sit a little high. Quote Link to comment Share on other sites More sharing options...
GeeBee Posted November 21, 2014 Share Posted November 21, 2014 nice eye for detail! is this kit the same as the clear-view clear plastic body one? sure does look similar. jb Yes it's the same kit, just the body is moulded in clear styrene Quote Link to comment Share on other sites More sharing options...
afx Posted November 21, 2014 Author Share Posted November 21, 2014 (edited) Thanks for the tips Leslie. I am going to modify the suspension so I will make sure to correct these issues. I am currently waiting on the photoetch kit. William / Geoff, If I am not mistaken the clear body kit is actually the touring car (Zakspeed) even though it comes with rally decals. The only difference between the touring car and the rally kit is the body & wheels. Everything else, chassis, engine etc. is the same. Edited November 21, 2014 by afx Quote Link to comment Share on other sites More sharing options...
GeeBee Posted November 21, 2014 Share Posted November 21, 2014 Thanks for the tips Leslie. I am going to modify the suspension so I will make sure to correct these issues. I am currently waiting on the photoetch kit. William / Geoff, If I am not mistaken the clear body kit is actually the touring car (Zakspeed) even though it comes with rally decals. The only difference between the touring car and the rally kit is the body & wheels. Everything else, chassis, engine etc. is the same. Quote Link to comment Share on other sites More sharing options...
dodouglas Posted November 21, 2014 Share Posted November 21, 2014 Nicee!! i want this kit..but probably i will not find Quote Link to comment Share on other sites More sharing options...
afx Posted November 21, 2014 Author Share Posted November 21, 2014 Looks like your kit is sealed Geoff. I have an opened kit of the Crystal Escort. I will dig it out this evening and post some pictures. Maybe I am misremembering that it is the Zakspeed body. Quote Link to comment Share on other sites More sharing options...
66belair Posted November 21, 2014 Share Posted November 21, 2014 I love those old Escorts, I wish the had sold those here in the states as well. Very cool. Quote Link to comment Share on other sites More sharing options...
Brizio Posted November 21, 2014 Share Posted November 21, 2014 Nice car! Looking forward to see more progress on this build. Quote Link to comment Share on other sites More sharing options...
57peppershaker Posted November 21, 2014 Share Posted November 21, 2014 The 1;1's were very cool back in the day & everybody had one here in the UK (stockers not RS1800's). Now they are worth a heck of a lot of money when restored / modified. This kit needs to be reissued. Quote Link to comment Share on other sites More sharing options...
afx Posted November 21, 2014 Author Share Posted November 21, 2014 The 1;1's were very cool back in the day & everybody had one here in the UK (stockers not RS1800's). Now they are worth a heck of a lot of money when restored / modified. This kit needs to be reissued. Revell of Germany was the most recent re-issue. They Issued the Escort along with the Fiat 131. Quote Link to comment Share on other sites More sharing options...
maltsr Posted November 21, 2014 Share Posted November 21, 2014 Revell of Germany was the most recent re-issue. They Issued the Escort along with the Fiat 131. I have that version in my pile, so I'm watching your build closely - looks great so far Quote Link to comment Share on other sites More sharing options...
afx Posted November 21, 2014 Author Share Posted November 21, 2014 (edited) I did remember correctly. Although the box art for the Crystal Escort shows the rally car the kit actually includes the touring car. I believe this is all of the versions issued to date. Edited November 21, 2014 by afx Quote Link to comment Share on other sites More sharing options...
jbwelda Posted November 22, 2014 Share Posted November 22, 2014 there is a clear view edition on ebay right now for 86$ shipped. I picked up 3 of them back 10 years ago at some liquidation place, for 3$ each. I should have bought 20...they had to have had at least a hundred there. jb Quote Link to comment Share on other sites More sharing options...
jrherald420 Posted November 22, 2014 Share Posted November 22, 2014 there is a clear view edition on ebay right now for 86$ shipped. I picked up 3 of them back 10 years ago at some liquidation place, for 3$ each. I should have bought 20...they had to have had at least a hundred there. jb Crazy isnt it? Ive got the clear body M1 and its not selling for nearly that much! Quote Link to comment Share on other sites More sharing options...
afx Posted November 22, 2014 Author Share Posted November 22, 2014 My clear body Escort had a casting deformity in the front edge of the roof. I had to repair it with putty to make the kit buildable. When I build it I am going to paint the body. Quote Link to comment Share on other sites More sharing options...
afx Posted November 22, 2014 Author Share Posted November 22, 2014 Opened up the front cooling vents and created radiator opening. Opened up the grill and head lights. Quote Link to comment Share on other sites More sharing options...
jbwelda Posted November 22, 2014 Share Posted November 22, 2014 that front end looks good! jb Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.