Mike 1017

Not worth a response.

I dropped the roof on the way to the dehydrator Mike

Another Masterpiece. The Marching Band is so KOOL. How many figures are on your diorama? Mike

Other than Slixx does anyone else sell Drag Racing decals. I really miss Whoopie Cat. Does anyone know why they went out of business? Thanks Mike

(9) Facebook

No, a nice greasy cheeseburger😆

How many coats did spray ?

No hardener It may be a 1k clear.

Yes. I spay it over bare plastic, primer, basecoat and really anything. I posted pictures of my fingers holding a T-Bird door panel that I sprayed with it. The other picture shows no residue or smears on my finger or the part. I will do it again and post my results. Good Luck Mike

I cleared a car 4 days ago and it is still soft. I did a light, then medium and then a heavy coat. Putting into my dehydrator made it worse. Maybe too many coats? I know that Jameston is busy. I am waiting for a response to the e-mail I sent him. Any advice would be appreciated. Mike

I have airbrushed and I have had good results. One heavy coat does the trick. I put the painted into my dehydrator which dries it out so it can be handled with no problems. Also, Molotov is ink not paint Mike

It looks like this is the wrong type of masking tape. You need to use hobby tape specifically made for painting. Even though you may not like the look. Clearcoat will help to protect the chrome paint. Go down the list there is a "the best masking tape thread" some good info. Mike

bill-e- boy is right. That is how I clean my airbrush no matter what paint I use. Also clean it as soon as you are done painting that will save you a lot of grief Mike

Ask and you will find . Good luck Mike

Send an E-Mail to USCP. Ukranian Scale Car Production. I am sure that they can explain their situation. Mike