Drake69 Posted February 27, 2015 Share Posted February 27, 2015 (edited) As an avid SK fan I would be remiss if I didn't do a model of my favorite movie car. And right out of the gate she took up her namesake. Pix first... Air cleaners, dual carbs, and intake manifold from the Chrysler 300C kit. I loved the detail AMT put into those parts, they really make the engine look right. BMF'ed the air cleaners for the chromed look, left the intake silver and painted the valve covers gold (just my take on the engine...). Body done in Tamiya Gray primer, lightly sanded, then sprayed with a coat of Tamiya White primer, smoothed out again. I started with Tamiya Matt White paint until I had a nice even white color on the upper half of the body, then masked off the roof for the next phase. I then laid down a coat of Tamiya Italian Red to the whole body, then a problem (more on that later), caused me to sand the problem area and shoot the whole model with a top coat of Model Master Flame Red. The darker Flame Red helped fix the problem perfectly and gave her a more "blood red" look. After masking the body panels. I shot the trim with Taimya Gloss Aluminum so that I would have a nice even look to the paint on her side panels, then coated the body with Future clear after some light sanding. This gave the flat white on the roof the glossy look it needed, and it sharpened up the red on the body as well. BMF will be next on the body to detail the trim. Now, beforehand I mentioned something about this one model living up to her namesake. The first thing that happened was I was using my motor drill pin vise to drill a small hole in the back of the block to fit the distributor since I was no longer using the kit's own manifold. During the test fitting/drilling/test fitting stage, the dizzy popped out from between my fingers and hit the floor. Of course, I'm not building the kit molded in RED so I could SEE the RED part on a cream colored carpet. Noooo. I have to be building the older, nicer, cleaner BELVEDERE kit with the CREAM-COLORED parts. So first thing for the sacrifice... one tiny distributor. I grabbed the one out of the red molded kit and grumbled profusely, angering her worse. More on the "paint sacrifice" later. Edited February 27, 2015 by Drake69 Quote Link to comment Share on other sites More sharing options...
Scalper Posted February 27, 2015 Share Posted February 27, 2015 Nice start so far. and Yes looks way better with the correct engine. Quote Link to comment Share on other sites More sharing options...
Drake69 Posted February 27, 2015 Author Share Posted February 27, 2015 And don't worry about the aluminum paint not covering up the stripe lines. BMF should lay down on them quite nicely and cover them up for a smooth look. Quote Link to comment Share on other sites More sharing options...
tbill Posted February 28, 2015 Share Posted February 28, 2015 carpet monster 1, you, zero, lol, I so know that pain.... she's looking good so far, look forward to seeing the progress on this. Quote Link to comment Share on other sites More sharing options...
Drake69 Posted February 28, 2015 Author Share Posted February 28, 2015 Need to put batteries in the camera, but interior is finished. Will take pics real soon. Quote Link to comment Share on other sites More sharing options...
Drake69 Posted March 1, 2015 Author Share Posted March 1, 2015 Interior complete... Chassis complete with tub and undercarriage assembled.... Next will be BMF, followed by glass install and then another dip in Future to seal everything up nice and neat. Quote Link to comment Share on other sites More sharing options...
Drake69 Posted March 2, 2015 Author Share Posted March 2, 2015 Body drying from Future dip last night.... And a shot of the adjustable steering... Quote Link to comment Share on other sites More sharing options...
Drake69 Posted March 2, 2015 Author Share Posted March 2, 2015 Almost there... Like looking down the barrel of a gun... Quote Link to comment Share on other sites More sharing options...
Drake69 Posted March 3, 2015 Author Share Posted March 3, 2015 Parts are drying, and I found my Las Vegas sign. Christine looks cool lit up with it.... Quote Link to comment Share on other sites More sharing options...
slusher Posted March 3, 2015 Share Posted March 3, 2015 You have a real beauty almost done there Allen... Quote Link to comment Share on other sites More sharing options...
Petetrucker07 Posted March 3, 2015 Share Posted March 3, 2015 Lookin good man. I have Christine in my stash. Your doing a great job on her. Quote Link to comment Share on other sites More sharing options...
DeeCee Posted March 3, 2015 Share Posted March 3, 2015 Coming along very nicely mate, and i found some strange things happened in the hobby room while building this one too. Quote Link to comment Share on other sites More sharing options...
Stray Posted March 3, 2015 Share Posted March 3, 2015 she's looking good man. Quote Link to comment Share on other sites More sharing options...
Drake69 Posted March 4, 2015 Author Share Posted March 4, 2015 Thanks all! Appreciate the comments! Alright, I'm going to bed. I need to put the front and rear plates on her but she's pretty much done. A BIG SHOUTOUT to Richard aka ramfins59 for figuring out why the hood doesn't sit nicely with our cars, it made my Christine look tons better. Pix to come! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.