vc273

Thanks for the reply's being new to the board its a bit overwhelming with all the replys as no else that i know of except for a few of my mates that are heavily into mopars really take any interest in my modelling. So again thanks has given me the encouragement to get stuck back into my hobby. The buckets i think are from the pro-street superbee i think as i got them out of my parts-box. Will double check and get back to you, Cheers

Hi Randy the simplest setup possible otherwise seen a set up where he filled the double axle wheel opening and opened it up for a single axle setup. Hi Brian yes i may just do as i have an old matchbox/amt transporter still in the box waiting for me to start but am waiting to get the dodge cab, not easy to find here in Australia as not many people carry the lindberg models in stock. Cheers for your replys

Hi heres my 71 Plymouth gtx pro-street that i have on the build.Have painted the body and bmf awaiting some clear coat. Added a pro-stock scoop and undecided to paint the bonnet body colour or flat black. Used the dodge superbee pro-street chassis and parts-box rims and tyres. Motor wise am currently building a twin turbo 440 big block for it but wont know if i will use it on this depending how everything looks. Still a far way to go before finishing, mabye should stop starting new build and might get on finished one day. Cheers and thanks for looking

Hi here is a 64 dodge 330 ss pro street that i have in the build. Used the dodge superbee pro-street kit that required very little modification. Painted the interior a dark blue, still have to detail it and modified the rear seat so it was street-able. Painted the body with a blue i had laying around and bmf it. Added the rims and tyres from the parts-box and that's about as far as i have got. Cheers and thanks for looking.

Hi thought i would share some pics of a 70 dodge superbee that i have on the build. Built basically out of the box except for a bit of wiring and plumbing and a change of rims. Still have a way to go before finishing. Cheers and thanks for looking.

Hi thought i would share some pics of my gtx on the build. Have painted the body in evergreen from the dupi-colour rattle can and bmf it then gave it a couple of coats of clear. All it really needs now is a good dust off and polish and the body should be done. Used the hemi heads, covers and supercharger assembly from the 40 willys pro street kit just for that different look. Modified the suspension to get it as low as i could and added the rims and tyres from the parts-box. The interior is basically stock with later model front buckets and a bit of detailing. All its really waiting for is final detailing and assembly. Will post some pic's when it is done. Cheers and thanks for looking.

Hi thought i would share some pics of a 33 willys im building at the moment. Mostly built box stock except for engine wiring and plumbing. Added some decals from a sheet i had in the parts-box as it looked pretty plain just red. Also added different front rims and tyres as well as the rear. Cheers and thanks for looking

Hi thought i would share a few pics of a 41 Plymouth gasser i have on the build. Have given it a fuel injected supercharged 426 hemi that still needs finishing as well as the wiring and plumbing. Built my own front end, i know a little unrealistic, but when i was trial fitting the first time and saw the stance with the rear stitting low couldn,t help myself but to leave it that way. Painted it white and added the decals i had in the parts box. Built a 60's style roll cage, installed a quick change diff, added the rear widened stock rims and added the front white walls and cragars. Will hopefully get back to finishing it some time soon. Cheers and thanks for looking

Hi just thought i would share some pics of a charger thats on the build at the moment. Started of as the dick landy 68 charger but the decals were unfortunately damaged so decided to use the lindbergs 64 dodge ramchargers to make up a what if car. Have opened up the boot added a modified pro stock chassis, can't remember what one, modified a 426 hemi to fit and started on the wiring and plumbing. On clear coating unfortunately some of the decals yellowed which made me put it on the back burner but will finish as it doesn't look to bad and maybe later down the track will resto the body. Cheers

Hi building a transporter out of the amt transporter and the dodge pick-up. Have cut the rear chassis off of the pick-up and started scratch building the rear chassis but cant seem to find any reference material for building the dual axle and rear leaf spring set-up. Any help greatly appreciated. Cheers

Hi very nice work so far looking forward to seeing more pics of your build. Building one myself at the moment but the front chassis was twisted so i have grafted the 40 willys pro street front end on it with a 340 small block mopar and in the process of building the rear end with tubs and 4 link. Like what you have done with the grill gives me lots of ideas. Heres a couple of pics of my progress. Cheers

Started work on the wheel tubs after getting rid of the paint as someone has hacked into them to get it to fit another body. Also have had to make up the rear bar section and the drivers cage as it only came with the side bars and the roof cage section. Not perfect but happy with my first attempt at bending and scratch building. Also had to extend the dash assembly now to finish off the cage. Cheers

Hi just thought i would upload a few pics of one of my build ups i have on the go. Have some pics elsewhere here but for those that didnt see them will post them aswell. Started with a real glue bomb pro stock kit that i was able to salvage and had a spare lindberg ramchargers dodge body lying around so thought i might match up the two. Here are some mock up photos. Cheers

Hi thanks for all the replys and the engine in the willys is the twin turbo twin supercharged and nitros assisted small block out of one of the early pro street kits. Cheers

Hi Green Duster love the pics of your duster and yes Darbo we seem to be a small breed here in australia but suits me fine especially when people have seen some of my models and cant believe the work and detail that goes into them. Cheers

It may be fighting you but it looks like your winning. Looking forward to seeing more pics of the build. Cheers

Thanks for the replys been out of the scene for about 15 years now and just really started to get back in to it except for a bit of tinkering here and there and am amazed by the quality that the guys build here. If i can be half as good i'll be a happy man. Again thanks for the replys

Hi had the same problem when i joined up. Go to photobucket set up an account which is free and upload your photos there. When posting your photos go to photobucket click on the photo you want ie copy image then paste it in the topic ie the same page you are posting your message on and it should show up on the page. You are still limited on the amount of photos but if you have more to show you just reply to your message and add more photos. Hope this help. cheers

Another 40 willys

What if 40 willys

K&S Pitman 40 willys in the build

Another 40 willys still waiting for clear coating and finishing off

Apart from being mopar mad i also love the 40 willys. Here are some of mine in the build. This one i used the pro street rear floor pan and chassis and grafted the gasser front end and chassis. I have also opened up the trunk. Going for that modern gasser look. Cheers and thanks for looking

67 gtx

68 dodge dart