Pro Tech

Possibly, if there is enough interest. Charlie Pro Tech LLC

Thanks Pete, I think I found info I need😉 Charlie Pro Tech LLC

Hi guys, I'm trying to contact Tim "Throttle Power" on YouTube. If you know of contact info (phone, email etc.) if you could PM me I would appreciate it. Thanks Charlie Pro Tech LLC

bobss396 Thanks, and please check out our "Modelers Gallery". Charlie Pro Tech LLC

Hi bobss396, The new 3D Plug Boots are not designed for the plug wire to go through the boot but be inserted into one end, the other end has a stem that will fit into drilled hole in the cylinder head etc. The boots were designed to be used with our plug wire (PTMC 1) as our wire has a much smaller wire core which makes it much more pliable (than most aftermarket wire) and put less stress on the stem portion of the boot. If you use other manufacturers wire (or other wire) I cannot say if you will have issues with stem breaking off due to stiffness of wire. The plug wire (hole) side of boot is approx .022 Charlie Pro Tech LLC

Thanks guys for the comments on the boots, people really seem to like them 😀. Charlie Pro Tech LLC

Thanks bobss396, I will look into those you mentioned. Thanks also for asking your friend. Thank you also for being a supporter of our products we very much appreciate it 👍 Charlie Pro Tech LLC

Hi Guys, I'm looking to expand my "Model Show Dealers" (U.S. only) so if you're an established dealer/vendor that does a good number of shows in your region per year (not 2 or 3) and can provide proof as such I would love to talk with you. Our products move very well and would be a great opportunity for those that qualify. You can send me an email at address below if interested. protech_modelproducts@yahoo.com Thanks, Charlie Pro Tech LLC protechmodelparts.com

Hey everyone, Just wanted to let you know that we have released a number of new 3D parts recently (including 1/25 Plug Boots) so please stop by and check them out on our website. www.protechmodelparts.com Thanks, Charlie Pro Tech Thanks, Charlie Pro Tech www.protechmodelparts.com

Thanks everyone, appreciate the kind comments 🙂 Charlie Pro Tech Model Parts LLC

Been very busy with the business but here are final pictures of the build. Charlie Pro Tech

Sad loss, a very talented builder. May he rest in peace. Charlie

Ian, great looking builds! Nice work 👍 Charlie Pro Tech

Hey John, how ya been? Great to see another build from ya! Look forward to more of your magic! Charlie Pro Tech

Great looking build. I think I noticed a few of our products on your build? If so, thanks for your support! Charlie Pro Tech

Guys, Rocky is my exclusive eBay seller for my Pro Tech parts line. He carries my full line of products for both 1/25 and 1/16-1/18 scale. I have known him for awhile now and he has proven to be a very straight up and honest guy to do business with and if anyone has purchased products from me (Pro Tech) I always treat the customer fairly and honestly and like my dealers to do the same and the reason I brought Rocky on board. He also is starting to do his own line of products so check out his site and check it often for any new products he will offer. Charlie Pro Tech Model Parts

Guys, Rocky is my exclusive eBay seller for my Pro Tech parts line. He carries my full line of products for both 1/25 and 1/16-1/18 scale. I have known him for awhile now and he has proven to be a very straight up and honest guy to do business with and if anyone has purchased products from me (Pro Tech) I always treat the customer fairly and honestly and like my dealers to do the same and the reason I brought Rocky on board. He also is starting to do his own line of products so check out his site and check it often for any new products he will offer. Charlie Pro Tech Model Parts

Just wanted to let everyone know that Pro Tech is running a "Special" for a limited time. Go to our website http://protechmodelparts.com and check it out on our homepage. Thanks and happy modeling, Charlie Pro Tech

Just wanted to let everyone know that Pro Tech is running a "Special" for a limited time. Go to our website http://protechmodelparts.com and check it out on our homepage. Thanks and happy modeling, Charlie Pro Tech

Hi guys, I am looking for someone that sells on ebay that would like to become a dealer of my product specifically on ebay. Please email me directly below (not pm) if interested. Serious inquiries only please. Charlie Pro Tech Model Parts protech_modelproducts@yahoo.com

We carry them in cast pewter that can be polished to a polished aluminum finish. Charlie Pro Tech Model Parts

Hi Mike, The Valve Stems are machined aluminum and one of our products (PTMC 72). The tires are kit tires out of another front engine dragster kit "The Young American". Thanks! Charlie Pro Tech

I got the wheels/tires done. I've added our Valve Stems and made lug nuts out of our .025 Hex Fittings and Evergreen rod. I have both how-to listed on our website under Modeling Tips. Thanks for looking. Charlie Pro Tech

Mike. what a great looking pair of fuelers you got there. You're one of the truly (few) master builders out there. Thanks again for your support of our products. Have a good day, Charlie Pro Tech