Ace-Garageguy

Well, I'd rather be stuffed and flown around as an old-man-copter than put in a hole in the ground to rot. Guess it's all in your particular point of view.

Please don't anybody get all outraged. I love animals, especially cats, but you have to admit this is just plain funny.

Here's a bizarro ride with another Allison, from 1954. The "Cramer Comet" was obviously influenced stylistically by Harley Earl's LeSabre concept car. I have black and white article on it in an old "little pages" mag.

Overall, I like it too...with reservations. The hood definitely works for me...but at the same time, the whole presentation screams "overwrought" and yes, somewhat "juvenile".

Based on the output of engines having similar technology (the Liberty 1650 cu.in. V12 from around 1918 made about 400HP), my guess is that the engine in this car would produce 200-250HP, tops.

Good one, Art ! The engine was apparently made by Wisconsin Airplane. Here's a shot of the intake side.

Thanks for the concern, guys. Didn't get a flu shot, never do, and usually don't get sick at all but for a little achy-tiredness and sniffles sometimes. This one is kicking my butt. I have a friend who gets pretty intense if she doesn't hear from me at least once a day, so the likelihood of being found during the spring melt, stinking up the place, is minimal. I'm running space-heaters where possible, but there are areas of the house that have virtually no insulation after finding and removing a mess of toxic-mold infested asbestos. The previous owner installed a heat-pump system, but it's not much good when the temps drop below freezing, and no good whatsoever since copper thieves stole all the wiring and lines.

Yup. Steve's right. And if you want a higher-polished look than you get with the Metalizer, try Alclad.

It's been maybe 3 years since I made the things, and all the info is in the shop notes, which are in the shop. Yes, they are combo tail / brake lights. Probably used white 20mA or 30mA 5mm leds...definitely white. I started by copying the circuit on a commercial set we had in stock for another car, modifying as I went. Probably kinda overkill, but I had custom PC boards (etched, really) made by a friend, rather than using perf-board. The whole mess went through several iterations until I was entirely happy with the look and brightness. I don't recall all the specs on the bits, but I do remember I used diodes to keep the tailights / brakelights from backfeeding through each other. Also used a clear diffuser that masks the individual LEDs and makes the old lenses glow evenly...and bright. The car owner was very insistent that he wanted lights as bright as LEDs that didn't look like LEDs.

Yes, that doesn't sound all that good. But the role of the Navy in wartime, and the place in it of particular vessels, has been changing and endlessly debated for decades. If she is indeed ultimately intended to be a platform for a rail-gun that can hammer shore positions while standing off 100 miles or so (the 16-inch guns of an Iowa-class battleship had an effective range of around 20 miles), she may yet prove to have a place in combat. Of course, 100 miles isn't really very far if the adversary has fighter-bombers capable of mach+ speeds...or missiles. Remember that fighting vessels of WW II rarely fought alone, and one ship wasn't expected to be able to do everything. I wonder who the theoretical enemy is here. More... http://thediplomat.com/2013/11/capt-kirk-takes-command-of-the-uss-zumwalt/

I made a set of LED taillights (using the OEM glass "Plymouth" lettered lenses) for the 354 Hemi-powered '33 Plymouth we're building. You're right about the skills developed during model building transferring over to detail work on the 1:1s. LEDs and resistors are assembled on a custom board, a red lucite inter-lens intensifies the color (the old red-glass Plymouth lenses are a little weak, color-wise).

Welcome to the forum, Dan. This topic has been discussed at length several times. Click this link to see a bunch of threads on it. https://www.google.com/search?q=site%3Amodelcarsmag.com+glue&oq=site%3Amodelcarsmag.com++glue&aqs=chrome..69i57j69i58.5745j0j8&sourceid=chrome&es_sm=93&ie=UTF-8 This particular thread has some excellent advice.... http://www.modelcarsmag.com/forums/?showtopic=53800

All that broad flat side does kinda make one wonder just how such a low claimed radar profile is achieved. Seems like a big ol' barn door would light up like a big ol' barn door. That must be the answer.

Yes, the Minilite-look suits the car well, especially in BRG. I put one together for a client back in the mid-'80s with 3 sidedraft 40mm Webers, a cam, headers and a 5-speed box. Also lowered, with urethane suspension bushings all around. Absolutely wonderful car.

I'm usually not much for complaining about health problems, but I've got the worst case of flu I can remember. I'm sicker than I've been since I've been an adult. Thought I was getting better this AM, but I'm slipping backwards again. Man, this bites. Deadlines looming, commitments, etc. Can't sleep for any length of time with the fever, and staying in bed puts my back out anyway. Can't get the indoor temperature above 55, have to haul water in from outside, and no hot shower (renovations ongoing but stalled). Really bites.

Collecting Beanie Babies would be good.

Oops...

Go to the first post of your thread, click "edit", then click "use full editor". A box called "topic title" will show the text of the heading, and you can edit it in the box. Click "submit modified post" and the edited heading will appear at the top of the thread.

Yes, 27 liters. That's about 1650 cubic inches. For reference, the Allison V1710 shown elsewhere in this thread was 1710 cubic inches. Military aircraft piston engines tend to be large displacement because of the need to generate lots of power, extremely reliably, at relatively low RPM. There's always some confusion about the SOHC and DOHC nomenclature. SOHC means a single overhead cam per cylinder bank. DOHC means two overhead cams per cylinder bank. Example: A SOHC V8 engine has 2 cams, while a DOHC V8 engine has 4 cams. This is confused further by people sometimes referring to DOHC V-engines with two cylinder banks as "quad cam" (referring to the total number of cams), and in the same breath referring to another engine as "double-cam" or "twin-cam" (referring to the number of cams per cylinder bank). In correct engineering-speak, SOHC ALWAYS means a single overhead cam per cylinder bank. DOHC ALWAYS means two overhead cams per cylinder bank.

That may very well be, but it would be quite unusual to think of a 7 liter pushrod engine as a variant of a 27 liter SOHC engine. There also appear to be other significant differences between the designs, one major one being that the Phantom engine had a one-piece block while the Merlin's was two-piece, split on the horizontal crankshaft centerline. These sound like very different engines indeed, though both are V12s with wet cast-iron cylinder liners. It may be accurate to say the Phantom III engine was a scaled-down and entirely reworked design very loosely based on the Merlin. Do you have sources? I'm not being argumentative...I'd just like to know the whole story here.

I wonder if it had a backup-beeper.

I'm not thinking that styling is #1 in a warship designer's list of priorities. Besides conventional weapons systems, she's rumored to include a rail-gun in her arsenal...which could give her firepower more like a battleship.

That "L bracket" has a name in the hot-rod world. It's called a "suicide" spring mount. It got it's moniker back in the days when some of the welding and fab work wasn't all the way up to snuff, and the mount, which takes a lot of bending loads from being cantilevered off of the front crossmember...broke off...with pretty disastrous consequences if you were moving rapidly. Still, it's one of my favorite means of hanging a solid, leaf-spring front axle.

How can this be, when the Merlin started life as a 27 liter SOHC engine (2 cams, one per cylinder bank), and the unit in the Phantom III was only around 7 liters, with a pushrod valvetrain, single cam-in-block ?