Ace-Garageguy

Yes. But definitely worth a Google search, you know, just to make absolutely sure... PS. You guys know there's a full-scale flying replica of the R2 built in 1991, right? Also, the Lindberg / Pyro kit that is listed as 1/32 actually scales out to about 1/26 (only the pilot figure is 1/32). The L/P model has some glaring inaccuracies like ribbed wings, but it's a great starting point for a fine model.

Made me smile too. Cute little bugger.

Alex, try clicking this link. It should give you a bunch of topics to read on ways of doing these things. https://www.google.com/search?q=site%3Amodelcarsmag.com+opening+doors&oq=site%3Amodelcarsmag.com+opening+doors&aqs=chrome..69i57j69i58.5932j0j8&sourceid=chrome&es_sm=93&ie=UTF-8

VERY nice.

Dude...teleportation went out with, like, V8 engines.

Welcome to the forum, Alex. Glad to have some younger builders signing up. I assume you mean opening the trunk, and it's not hard on any styrene model body if you take your time and work carefully. All you really need to do is to repeatedly score the molded-in lines with the back of an X-acto blade, or my favorite, the tip of a razor saw. Be patient, being careful to not cut yourself in the process (we ALL do it sometimes), and eventually the lines will get thin enough to allow the panel to come out. Depending on the class your mythical car might run in, hinges could very well be necessary for the decklid, and there are several good threads here on making them.

Also the active ingredient in most commercial drain openers, also known as "lye".

Beautiful model. I love seeing warbirds built. but for some reason rarely frequent the aircraft boards. You're re-kindling an interest I've had for a very long time.

Great idea, and a nice acknowledgement that this is a worldwide hobby, with international representation on the forum.

Whoa. Beautiful rework.

And some grumpy old fossil will be complaining that the old-school electron beams were much better than the dang new-fangled neutrino beams...

Pretty cool. We used to have a similar plastics supply outlet nearby, but they went bust during the recession. Glad your guys weathered the storm.

Thanks Carl. Seeing that made my day. Every other Seafire I've ever seen has been a bubble-canopy type. I wasn't even aware a razorback model was built. Great stuff.

Thanks for that, Snake. I'll for sure give it a try. Well thought out, with the dishwashing liquid to break the surface tension and the coloring. Genius.

4 reasons: 1) I get stuck where my vision has overreached my skills, and I have to let the skills develop. I'll fiddle and work on other things, and sneak up on the required ability. 2) I decide to make a somewhat major change away from the original idea. Usually, rather than hacking into the thing, I'll put it aside and ruminate on it, to be sure I want to un-do work that is already complete. 3) The most fun part of the build to me is the "imagineering", the creative design phase. When it gets to be more like work, final fitting, finishing and detailing, my interest declines. I need to work on my self discipline...a good character-building side function of the hobby. Though I often use the excuse "I enjoy the building so much that I don't need to finish anything to be happy", I think I'd look back and feel my time was better spent if I could see a few more finished models on the shelves. 4) Real life gets in the way. For well over a year, I've been so immersed in taking care of things that shouldn't have been my problems to begin with, that I've had zero bench time until a couple of weeks ago.

You are correct, and I also mentioned split or offset crankpins in my post. The 60 degree (or multiples thereof) V-angle between banks is still the preferred layout. All you have to do is look at the beautiful symmetry of the Lambo crank, and you know why. Split crankpins and "ignoring minor vibrations" just aren't parts of my particular definition of good engineering. Your opinion may differ.

Kool. Love a Loewy Stude on the salt, or anywhere.

Yeah, Betty P. and a Gee Bee in the same pic...put a Pennsy S1 in the background, and you'd have my 3 favorite machines of all time.

I believe both the Challengers and the Big Boy engines were built by the American Locomotive Company, also known as Alco, in New York. I always thought Baldwin was in Pennsylvania, but Lima Locomotive Works was in Lima, Ohio.

Like I said...

Sorry fellas, but the angle between cylinder banks is a determining factor to firing order, and 60 degrees between banks is the typical angle for V6 and V12 engines, 90 degrees for V8 (and V4) engines and it has to do with dynamic balance issues, what's called "rocking couple", and being able to use common rod journals on opposed cylinders, thereby shortening the crankshaft, allowing a smaller engine and making it easier to manufacture. Unfortunately though, even 60 degree V6 engine designs do not allow sharing of crankpins by two rod journals. You can see that a typical 60 degree V12 (Lambo Espada in this case) does indeed have two con-rod journals sharing crankpins. 60 degree V12 engines like this are lovely and smooth, and are essentially two inline sixes sharing a common crank. A 90 degree V12 will have peculiar balance and roughness issues that have to be dealt with by using split crankpins to achieve even firing impulses. Yes, GM DID hack off two cylinders from a V8 to make a V6, and it ultimately got what is now referred to as an "even fire" crankshaft, where the rod journals are staggered to get smooth , evenly-spaced firing impulses. Some of the cranks were prone to cracking through the staggared journals, and the non-even-fire engines felt like they were running rough, all the time. You could, of course, machine an even-fire, staggered-journal crank to work in a 90 degree V12. That's what I was wondering about...what it looked like, and if they even bothered.

Guess you missed post #63. (By the way...I was an A&P...aircraft airframe and powerplant...mechanic for several years, and years before that an ASE certified Master Mechanic, as well as having ASE ratings in body and paint). I quote myself: "A Cirrus SR 22 is a 200 MPH, 4-passenger airplane. It weighs about 2300 pounds. It has extremely sophisticated onboard electronics (much MORE capability than any car ever made) including 2 10" flat screen redundant multifunction displays, a backup electrical system, navigation equipment, anti-collision system, dual comm radios, GPS, storm-scope (plus, the aircraft autopilot can fly itself over a predetermined map course while you read or snooze...if you trust the system enough), a wing de-icing system, sat-com capability, AND A PARACHUTE TO LAND THE WHOLE AIRPLANE safely in a catastrophic emergency. Tell me why a car to take one probably overweight ass to work and back REALLY needs to weigh 3800 pounds (or more)." My point being: a lot of onboard electronics and wiring for sophisticated systems is not sufficient reason for bloated surface-vehicle weights.

Thank you sir. You have just reinforced my earlier remarks that really significant improvements in vehicle efficiency are better sought by reducing vehicle weight overall, allowing smaller engines to drag them around happily. But lots of 'Mercans still like big cars and trucks, with big ol, thirsty engines. And the efficiency improvements in those...of similar weight and engine displacement to their '50s predecessors...aren't that impressive for the millions and millions of bucks spent to get there. Funny...the recent cheapening of gas prices over here is spurring a return to buying gas hogs en masse. Little car and electric sales have flat-lined. I guess now that gas is selling for 1/2 of what it was a couple of years back, the popular perception is that it's going to last forever.

The Tognotti kit is pretty rare and sometimes pricey, and what you need most from it is the flat-end T fenders. Here's a couple more kit sources...not that they'll be any easier to find, but you never know...

Ah yes, but it's not 3 times as efficient for the same weight, same engine-displacement vehicle. THAT'S the point. And the drivers of the manufacturer's cycles aren't driving like real-world drivers either. Nothing ever returns the EPA estimates that are on the window sticker. They're fancy smoke-and-mirrors fantasy.