guitarsam326 Posted July 6, 2015 Share Posted July 6, 2015 Does anyone know how or if you can remove ca glue crazing from windows, im sure theres a previous thread on this subject so if someone could point me in the right direction, that would be appreciated too, thanks in advance! Quote Link to comment Share on other sites More sharing options...
3100 chevy Posted July 6, 2015 Share Posted July 6, 2015 (edited) Google this model car mag removing ca glue from windows site:www.modelcarsmag.com Edited July 6, 2015 by 3100 chevy Quote Link to comment Share on other sites More sharing options...
fseva Posted July 7, 2015 Share Posted July 7, 2015 Does anyone know how or if you can remove ca glue crazing from windows, im sure theres a previous thread on this subject so if someone could point me in the right direction, that would be appreciated too, thanks in advance! There's no easy solution... you'll need to sand it down past the damage, and then bring back the shine through progressively finer grits. Quote Link to comment Share on other sites More sharing options...
Snake45 Posted July 7, 2015 Share Posted July 7, 2015 If you mean the frosting from the fumes, it comes right off with rubbing alcohol. At least it always has for me. Quote Link to comment Share on other sites More sharing options...
guitarsam326 Posted July 7, 2015 Author Share Posted July 7, 2015 (edited) If you mean the frosting from the fumes, it comes right off with rubbing alcohol. At least it always has for me. Yes, the froating is what i have a problem with, ill try the alchohol, thanks! Edited July 7, 2015 by guitarsam326 Quote Link to comment Share on other sites More sharing options...
JTalmage Posted July 7, 2015 Share Posted July 7, 2015 This is nice to know. Quote Link to comment Share on other sites More sharing options...
mike 51 Posted July 7, 2015 Share Posted July 7, 2015 There's no easy solution... you'll need to sand it down past the damage, and then bring back the shine through progressively finer grits. Thank goodness he waited for an answer from an experienced modeler huh? To me, wiping it off seems a good deal easier than your "idea" and far less likely to ruin his glass.... Quote Link to comment Share on other sites More sharing options...
Ramfins59 Posted July 7, 2015 Share Posted July 7, 2015 You can use non-fogging CA glue which is usually labelled "Gold". It does not cause fogging or frosting on either clear or chromed parts. I get it at my LHS, and it is now the only CA glue that I use. Quote Link to comment Share on other sites More sharing options...
JTalmage Posted July 7, 2015 Share Posted July 7, 2015 is "gold" the brand name? Quote Link to comment Share on other sites More sharing options...
guitarsam326 Posted July 7, 2015 Author Share Posted July 7, 2015 X2, whats the brand name please? Quote Link to comment Share on other sites More sharing options...
fseva Posted July 7, 2015 Share Posted July 7, 2015 "Gold" CA is manufactured by Bob Smith Industries, and he will take the name of the business he's selling to and imprint the product with the other parties' name. That's why it's so hard to identify - it could be available under dozens of names. Also, you want their Insta-Set accelerator, which is made to be used with the Gold CAs. Quote Link to comment Share on other sites More sharing options...
Krazy Rick Posted July 7, 2015 Share Posted July 7, 2015 Thank goodness he waited for an answer from an experienced modeler huh? To me, wiping it off seems a good deal easier than your "idea" and far less likely to ruin his glass.... So much for my thoughts, of trying to make a replacement using a diamond ring on a crystal salad bowl. Quote Link to comment Share on other sites More sharing options...
taaron76 Posted July 9, 2015 Share Posted July 9, 2015 I've been using this for a while on clear parts and windows. It dries super hard, but if you get it on paint or places you don't want it, just wipe it off with no issues or paint removal. Quote Link to comment Share on other sites More sharing options...
guitarsam326 Posted July 9, 2015 Author Share Posted July 9, 2015 I've been using this for a while on clear parts and windows. It dries super hard, but if you get it on paint or places you don't want it, just wipe it off with no issues or paint removal. Ill have to try that! Thanks tp everyone for responding! Quote Link to comment Share on other sites More sharing options...
fseva Posted July 10, 2015 Share Posted July 10, 2015 (edited) I've been using this for a while on clear parts and windows. It dries super hard, but if you get it on paint or places you don't want it, just wipe it off with no issues or paint removal. I read 2 reviews on Amazon, and they said that it takes closer to 15 minutes to set up, or that even after 10 minutes in clamps, the items being glued simply fell apart. Could you please add your experience as far as drying and clamping is concerned? Edited July 10, 2015 by fseva Quote Link to comment Share on other sites More sharing options...
Pete J. Posted July 10, 2015 Share Posted July 10, 2015 Go over to the RC side of the house and get a bottle of Polyzap manufactured by Pacer/Zap. It is designed for Lexan RC bodies and canopies. It is a thick CA and takes a couple of minutes(but only a couple) to set but it won't fog clear. Also a great gap filler. Quote Link to comment Share on other sites More sharing options...
taaron76 Posted July 10, 2015 Share Posted July 10, 2015 I read 2 reviews on Amazon, and they said that it takes closer to 15 minutes to set up, or that even after 10 minutes in clamps, the items being glued simply fell apart. Could you please add your experience as far as drying and clamping is concerned? For me, there is no hurry in the cure time when mounting and gluing the windows, but this glue is extremely strong once it sets. As far as the reviews, I'm not sure what they were applying it to, but I use it on anything that needs to be clear with no fogging of hazing. The other important aspect I like about this glue is that if you get it on a surface that has been painted, simply wipe it off with no consequences or damage to the paint. Other "super" glues don't offer that sanctuary, which is a big plus for me. Tim Quote Link to comment Share on other sites More sharing options...
fseva Posted July 14, 2015 Share Posted July 14, 2015 For me, there is no hurry in the cure time when mounting and gluing the windows, but this glue is extremely strong once it sets. As far as the reviews, I'm not sure what they were applying it to, but I use it on anything that needs to be clear with no fogging of hazing. The other important aspect I like about this glue is that if you get it on a surface that has been painted, simply wipe it off with no consequences or damage to the paint. Other "super" glues don't offer that sanctuary, which is a big plus for me. I have a supply of this glue in the pipeline. I understand it is a thick glue - how do you apply it, and do you apply it to the clear glass or the frame for the glass? Quote Link to comment Share on other sites More sharing options...
taaron76 Posted July 14, 2015 Share Posted July 14, 2015 I have a supply of this glue in the pipeline. I understand it is a thick glue - how do you apply it, and do you apply it to the clear glass or the frame for the glass? It is thick, but I usually apply it with a toothpick or a small solid core wire or pin. It all depends on the situation, as far as where the glue get applied. Sometimes I set the glass and then glue, and other times I place glue on the frame or glass and then set it. Tim Quote Link to comment Share on other sites More sharing options...
fseva Posted July 14, 2015 Share Posted July 14, 2015 It is thick, but I usually apply it with a toothpick or a small solid core wire or pin. It all depends on the situation, as far as where the glue get applied. Sometimes I set the glass and then glue, and other times I place glue on the frame or glass and then set it. That's kind of the way I approach each instance. Sometimes, it's very easy to use one finger to hold a part in place, while applying glue with the other hand. There are times when you need some glue to be there before you place the part, and for this I have been using Pressure Sensitive Glue by Micro-Mark. The problem with this product is that if you don't be careful in how much glue you apply, after the part has been installed, if there is glue that hasn't been covered by the part, it can easily attract dust, pet hair, etc. Quote Link to comment Share on other sites More sharing options...
martinfan5 Posted July 15, 2015 Share Posted July 15, 2015 (edited) I have a bottle of the Loctite G02 glue, it does work good, I will agree, the set up time does take a little bit , for me, its a set it and forget about for a little bit , and it does wipe right off, if dried, I wet a Q-tip and it comes right off. I have gone back to using Formula 560 Canopy glue. For the Loctite G02 , I use a glue tip, the ones that you can use on Testors tube glue, I had to trim the tip on the bottle down a good amount for it to fit, but the issue and why I went back to the Canopy was the glue doesnt really settle back down in the bottle, so it clogs up the tip/ and the cap/tip that is apart of the bottle everytime. Edited July 15, 2015 by martinfan5 Quote Link to comment Share on other sites More sharing options...
AllStar kustom models Posted August 17, 2015 Share Posted August 17, 2015 They make a ca glue remover. I think it's in a green bottle. U can get it anywhere Quote Link to comment Share on other sites More sharing options...
fseva Posted August 17, 2015 Share Posted August 17, 2015 I have a supply of this glue in the pipeline. I understand it is a thick glue - how do you apply it, and do you apply it to the clear glass or the frame for the glass?I received my bottle and am disappointed. If you use it for windows, you would definitely have to tape the window in place before applying the glue, because it's real easy to skid the window around, even when you think it's set, and then you get glue all over the visible surface. I just don't see any real advantage, when I've had such good success with Gold CA - No fogging and it's fast, because it can be accelerated (Insta-Set) without harm to the glass. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.