dodge super bee 1970 pro street

[dragzz]

thanks slusher white is nice its not hok cost to much where i live. so went with ppg 

[dragzz]

hello all i need some help i did some of the spark wireing in the pic u see its just dont look right to let me know if a have to chage it or just leve it thank u all

[Sledsel]

Hope this helps

Edited August 24, 2015 by Sledsel

[dragzz]

tys sled i knew it did not look right tys 

[Sledsel]

tys sled i knew it did not look right tys 

No problem. If you decide to do something with it, ya may want to think about repositioning the distributor also.

 

Edited August 24, 2015 by Sledsel

[slusher]

Thomas it may be wrong but i think you have the distributor right to the instructions. You will have to drill a hole to change it but i would have to check my instructions. Keep up the good work friend...

[b-body fan]

I think the wiring looks okay with that high-rise intake. you don't have to route them o.e. style on a built engine.

[dragzz]

tys guys the distributor will have to redone  and slusher its need to lean to the left side its not that big of a deal good thing we got it now then much later tys again guys

[Sledsel]

Keep up the progress reports.... Lookin good so far

 

[Yo Jutt]

This looks real good. I can't belive I passed up this kit the other day at the hobby shop. Looks like a great kit I may have to make a second trip!! Lol

[dragzz]

ya yo jutt better make that trip its nice kit so far 

 

here is a bit of an update  i got the  distributor in the right spot now just got to do the wireing again wont take to long here a pic of it

 

 

[Jantrix]

Just remember that ignition wires aren't rigid, so they lay like in Andy's photo rather than arc over the valve covers.

[dragzz]

tys jantrix looking at diff pic of cars to see how thay go the pic he has is a real good one to go by tys for the info

[Kit Basher]

You're doing nice  work, Thomas. One thing: the spark plugs on a hemi are down inside the valve covers. In Andy's photo, you can see that there is just a rubber boot and the wire going into the valve cover.

Edited August 27, 2015 by Kit Basher

[dragzz]

yes kit basher that is right. there in place now but for the next build i will know better  but for now it looks ok tys for the info

[Yo Jutt]

Well dragzz not gonna lie you twisted my rubber arm so to speak!! Looked at this thread a few more times and your doing such a great job on this kit, looks like a blast. I went back to the hobby shop and picked up one of my own. Now all I have to do is figure out a building space in this new house....

[carnut]

Looking good there, I just might have to get one of these.

[Kit Basher]

yes kit basher that is right. there in place now but for the next build i will know better  but for now it looks ok tys for the info

That's a good attitude. BTW, those spark plugs and the boots look really nice. Are they both from rbmotion?

[dragzz]

yes kit thay are from  rbmotion the one thing i dont like the boots as thay or really soft and hard to work with if u get take your time with them

Edited August 30, 2015 by dragzz

[Kit Basher]

Thanks, Thomas.

[dragzz]

np kit.  as of right now iam redoing the spark plugs wires i should have an up date in a fews day for u guys and iam waiting on some new carbs to come in the mail for it as well 

[dragzz]

here is a update on the motor i reworked the wires i came out looking good did not use the spark boots that was on it befor so here are soom pic of the rework

 

 

[disabled modeler]

Looking good...

[dragzz]

tys disabled modeler

[The dood]

What's your impression of the kit overall?  I am thinking of picking it up but I am still new to hobby