Jump to content
Model Cars Magazine Forum

Recommended Posts

Posted (edited)

While awaiting some Plastruct 1/8" elbows to finish off the rear plumbing I turned attention to making up the siren for under the hood and the final details at the rear of the rig.  With a couple of photos and some actual measurements a pattern was drawn out of the siren.  Aluminum rod was turned to the appropriate dimensions.  I used some photoetched HO scale rooftop walkway material to make up the outside perimeter.  Not exactly like the prototype but the idea is there.  A hole was drilled in the bottom to secure the photoetch with a pin.  Another hole was drilled in the bottom of the motor base for a second mounting pin and a strip of aluminum was wrapped around for the mounting bracket.  A little paint and the only thing lacking is that wailing sound.

With the exception of finishing off the plumbing for the hoselines on the top the rear is now finished.  Red flashers and spot lights, license plate, and pump engine switches and throttle were added.  Under the hose body is the tank fill line and two lengths of hard suction, one of which has the strainer attached.  Mud flaps were made with 0.020 plastic sheet stock and some black electrical tape stuck face to face.

Some traffic cones were also added from the parts box.  They actually carry some on  the real rig.

1_181.thumb.jpg.a40e62aa2fa41ac0dd95f8181_187.thumb.jpg.a8852ae3e9026052aa2dbf1a1_184.thumb.jpg.d32b76f6751e2cb88235edc01_183.thumb.jpg.45b9d980468e8626a17e9f6c

Edited by Chariots of Fire
Posted

 

 Awesome attention to detail. And excellent execution. Every time I think you have finished this build you add more detail.  Fantastic build.

 

 

 

     Be Well

       Gator

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...