Len Colombo Posted September 28, 2016 Share Posted September 28, 2016 Asked this on another board but did not get a response. Can you use regular flat white or grey paint as a primer? Or does primer have ingredients in it that regular paint does not have? Tia. Quote Link to comment Share on other sites More sharing options...
Snake45 Posted September 28, 2016 Share Posted September 28, 2016 I've used many of the Model Master military flats as primers, everything from white to dark blues and greens (airbrushed). They perform most of the important functions of "primer" just fine (though they might not stand up to the hotter automotive paints)."Back in the Day," many, many of us used AMT, Testor, or Pactra Flat White as a standard "primer" under just about every color. It worked fine. Quote Link to comment Share on other sites More sharing options...
Warren D Posted September 29, 2016 Share Posted September 29, 2016 I have run across a few brands that do have a somewhat different primer. Hobby paint called Tru-Color is that way, they say to use their primer and you really have to. Learned that lesson the hard way. If you are painting fiberglass or aluminum then the primer is more specific to the material. Quote Link to comment Share on other sites More sharing options...
astroracer Posted September 29, 2016 Share Posted September 29, 2016 (edited) Asked this on another board but did not get a response. Can you use regular flat white or grey paint as a primer? Or does primer have ingredients in it that regular paint does not have? Tia."Regular" paint, even if it is flat, has a different composition then "primer". Primer is meant to fill imperfections and be sandable so it has more solid material in it. A couple of coats of primer/surfacer will sand down MUCH better then a couple of coats of top coat intended paint. The primer allows you to sand it down, not only to level surfaces but to cover body work and feather-edge body worked areas. Regular paint is not intended for that purpose.Mark Edited September 29, 2016 by astroracer Quote Link to comment Share on other sites More sharing options...
yh70 Posted September 29, 2016 Share Posted September 29, 2016 i been using flat white and gray's for years and never had any problems.most are Walmart brands.. Quote Link to comment Share on other sites More sharing options...
Snake45 Posted September 29, 2016 Share Posted September 29, 2016 "Regular" paint, even if it is flat, has a different composition then "primer". Primer is meant to fill imperfections and be sandable so it has more solid material in it. A couple of coats of primer/surfacer will sand down MUCH better then a couple of coats of top coat intended paint. The primer allows you to sand it down, not only to level surfaces but to cover body work and feather-edge body worked areas. Regular paint is not intended for that purpose.MarkCan't argue with any of that, but I've found that for 95% or more of the stuff I do, a true "primer" isn't really necessary. I don't do a lot of heavy bodywork with putties, fillers, dissimilar materials, and so forth. I'm mostly just laying hobby-grade enamels or lacquers on lightly massaged kit styrene, and for that, flat paints work fine. Most of the time they don't even require sanding, and they don't obscure detail as much as heavy-duty primers. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.