Pre wired distributers and magnetos

[m408]

Can't remember where I found them. Help?

[Brian_R]

Kris Morgan has some distributors and resin parts on eBay.

Real nice parts and fast delivery too.

Check for seller - morgandetail

Brian

[Bernard Kron]

Kris Morgan has some distributors and resin parts on eBay.

Real nice parts and fast delivery too.

Check for seller - morgandetail

Brian

Scale Modeling by Chris (SMBC) also carry them at the same price. Sometimes they have more color choices. Also excellent delivery.

http://www.scalemodelingbychris.com/mad.htm

They're as nice a pre-wired distributor as is out there.

The SMBC magneto is also nice:

http://www.scalemodelingbychris.com/magnetos.htm

[Clay]

Here is his eBay store. morgandetail

http://search.ebay.com/_W0QQfgtpZ1QQfrppZ2...Q3aMEFSQ3aMESOI

and here is one of his products.

[Don Banes]

Scale Modeling by Chris (SMBC) also carry them at the same price. Sometimes they have more color choices. Also excellent delivery.

http://www.scalemodelingbychris.com/mad.htm

They're as nice a pre-wired distributor as is out there.

The SMBC magneto is also nice:

http://www.scalemodelingbychris.com/magnetos.htm

SMBC has the BEST distributors! This is my recently finished Deuce tudor with one of his distributors...

[MikeMc]

SMBC has the BEST distributors! This is my recently finished Deuce tudor with one of his distributors...

Thats where I got the BEST AROUND !!!!!!!!!

http://www.scalemodelingbychris.com/mad.htm

[m408]

Here is his eBay store. morgandetail

http://search.ebay.com/_W0QQfgtpZ1QQfrppZ2...Q3aMEFSQ3aMESOI

and here is one of his products.

They are nice Clay,

Raul gave me one also at our get together.

I have not had good luck with ebay. I guess I just don't understand it. But thanks for the input.

[m408]

Thanks all.

I have purchased from Chris in the past, and agree. Good prices, nice products, and exceptional service.

Just couldn't remember where I saw them. Going there now.

[MR BIGGS]

This is where I get all my pre-wired Distribuers from. I think they are the most realistic looking one's out there. I buy them in bunchs and you cant beat the price.

http://www.arrowheadaluminum.com/Distributors.html

[crazyjim]

I polish 3/32" aluminum tubing to be used as the distributor shaft (about 1/2" long), polish 1/8" aluminum tubing for the distributor cap and super glue to the shaft. Then I cut 8 pieces of distributor wire (Scale Dreams) that are 2" long and 1 piece 1" long (8 for the spark plugs and 1 for the coil). Put some plastic glue in the cap and stick all 9 wires in. Bing, bang, done!

[m408]

This is where I get all my pre-wired Distribuers from. I think they are the most realistic looking one's out there. I buy them in bunchs and you cant beat the price.

http://www.arrowheadaluminum.com/Distributors.html

Checked out his web site and couldn't get any pricing info.

[m408]

I polish 3/32" aluminum tubing to be used as the distributor shaft (about 1/2" long), polish 1/8" aluminum tubing for the distributor cap and super glue to the shaft. Then I cut 8 pieces of distributor wire (Scale Dreams) that are 2" long and 1 piece 1" long (8 for the spark plugs and 1 for the coil). Put some plastic glue in the cap and stick all 9 wires in. Bing, bang, done!

Shoot, if I could do all that, I wouldn't be looking for pre made ones.

[Brian_R]

Search the forums for Arrowhead before you send your money.

[Bernard Kron]

Checked out his web site and couldn't get any pricing info.

The pricing is on the page for each of the four individual variations:

PWD-8 Standard Distributor:

All PWD-8 Distributors Are $3.75 & Include Aluminum Base

PWD-8V Standard Distributor with Vacuum Advance:

All PWD-8V Distributors Are $3.75 & Include Aluminum Base

PED-8 Electronic Distributor

All PED-8 Distributors Are $4.00 & Include Aluminum Base

PED-8V Electronic Distributor with Vacuum Advance:

All PED-8V Distributors Are $4.00 & Include Aluminum Base

Unfortunately, as Brian R points out: "Search the forums for Arrowhead before you send your money." There have been complaints about delivery times, communications and refunds. Too bad, they look like mighty pretty pieces!

Edited June 3, 2008 by gbk1

[Don Banes]

The pricing is on the page for each of the four individual variations:

PWD-8 Standard Distributor:

All PWD-8 Distributors Are $3.75 & Include Aluminum Base

PWD-8V Standard Distributor with Vacuum Advance:

All PWD-8V Distributors Are $3.75 & Include Aluminum Base

PED-8 Electronic Distributor

All PED-8 Distributors Are $4.00 & Include Aluminum Base

PED-8V Electronic Distributor with Vacuum Advance:

All PED-8V Distributors Are $4.00 & Include Aluminum Base

Unfortunately, as Brian R points out: "Search the forums for Arrowhead before you send your money." There have been complaints about delivery times, communications and refunds. Too bad, they look like mighty pretty pieces!

Bernard! Get yours from Scale Modeling By Chros (SMBC). They're good people, and I've never had an issue with their prices or service! While you're at it, check out their cool little drive-in place. I've bought a lot of items from them, and I've never had an issue with their quality or service.

[Don Banes]

Duhhhhhhhhhhhhhhh! I meant Scale Modeling By Chris, not Chros. Tell him I sen you. He knows me.

[m408]

Thanks all,

Just placed an order with Chris for some distributers and various hook up wires and plumbing parts. I have done buissness with him in the past. His work is nice, prices good, delivery is prompt, and support excellent.

[Olle F]

I'm sure Arrowhead's distributors are nice, I can't wait to get the one I ordered and paid for 10 months ago...

[raisin27]

Kris Morgans distributers are the best pre wired I have used. I tried Arrowhead's before, it took 9 months to get them and I thought they were way to big and lacked the sharp detail on the caps.

[MR BIGGS]

I placed a big order from Arrowhead and got my stuff a week later. I think he had some medical problems in the past that's why alot of stuff did not go out.

[RyanSilva]

I placed a big order from Arrowhead and got my stuff a week later. I think he had some medical problems in the past that's why alot of stuff did not go out.

On there website (not ebay) they have a open apology statement, he exsplains everything.

I have ordered from them this past month and got my order flawlessly.

as far as magnetos.. make your own!

http://s167.photobucket.com/albums/u129/73...chevy%20pickup/

i started with 1/16 alum tubing for the shaft, 3/32 over the 1/16 then placed a slightly shorter 1/8th tubing over the 3/32 so i could have a cap, i then drilled a hole with my pinvise, then chucked up the same bit in my drem and hollowed out the hole for the wires to fit.

Edited June 11, 2008 by RyanSilva

[cherokee]

I'm sure Arrowhead's distributors are nice, I can't wait to get the one I ordered and paid for 10 months ago...

if you check arrowheads website you'll see the reason for delay the owner has under went some major major back surgery you can see xrays and the like on website he makes every piece by hand , so check website just thought you would like to know whats up with your order

[Olle F]

if you check arrowheads website you'll see the reason for delay the owner has under went some major major back surgery you can see xrays and the like on website he makes every piece by hand , so check website just thought you would like to know whats up with your order

Yeah, I know. And isn't it great that they're still taking orders when they can't fill one that was paid for ten months ago.