Buffs Fan Posted January 6, 2018 Posted January 6, 2018 Ok I am going to try to do a WIP build I decided to do a close replica of the Street Beast from Street Outlaws it's a 70 Monte Carlo
Buffs Fan Posted January 6, 2018 Author Posted January 6, 2018 I started by removing the Cowl, inner fender wells and the radiator support
Buffs Fan Posted January 6, 2018 Author Posted January 6, 2018 Next I took to it with some sandpaper to remove the lower body trim and my finger prints Please enjoy and comments or critiques are welcome
426 pack Posted January 6, 2018 Posted January 6, 2018 Will be watching this. The street beast is one of my favourite cars on the show.
W-409 Posted January 6, 2018 Posted January 6, 2018 This is an interesting project, I'll gotta keep an eye on it! Are you going to build the earlier version of Street Beast with the higher stance or the later, more aerodynamic version? In my opinion the earlier version was a lot cooler, but of course to keep up with the competition I understand that some modifications have to be done...
Khils Posted January 6, 2018 Posted January 6, 2018 Mike, I am on board to see your build...also like the Street Beast....big head Doc, another story. I would like to know your reference source. ......other cars from the show I'd like info on. Carry on Sir!
Buffs Fan Posted January 6, 2018 Author Posted January 6, 2018 1 hour ago, W-409 said: This is an interesting project, I'll gotta keep an eye on it! Are you going to build the earlier version of Street Beast with the higher stance or the later, more aerodynamic version? In my opinion the earlier version was a lot cooler, but of course to keep up with the competition I understand that some modifications have to be done... I am hoping for a lower stance out of it
Buffs Fan Posted January 6, 2018 Author Posted January 6, 2018 1 hour ago, Khils said: Mike, I am on board to see your build...also like the Street Beast....big head Doc, another story. I would like to know your reference source. ......other cars from the show I'd like info on. Carry on Sir! I actually like Ol Big head Doc as far as the reference material I have pulled pics off of Twitter and Instagram and have had a few back and forth messages with Doc thru Twitter to get body color codes ETC
Buffs Fan Posted January 6, 2018 Author Posted January 6, 2018 3 hours ago, 426 pack said: Will be watching this. The street beast is one of my favourite cars on the show. 3 hours ago, NYLIBUD said: Cool,I'll be waiting for more pics. 2 hours ago, vintagercr said: This should be cool Thanks I hope I dont disappoint
Buffs Fan Posted January 7, 2018 Author Posted January 7, 2018 Ok I started to work on the cowl hood scoop this morning First I "kinda" measured out my cut lines
Buffs Fan Posted January 7, 2018 Author Posted January 7, 2018 Then I used an old blade to score my cuts until I made it all the way thru the hood and had nice clean cuts
Buffs Fan Posted January 7, 2018 Author Posted January 7, 2018 Next I busted out the styrene sheet and made the sides and the top of the scoop I did laminate 2 pieces together on all 3 parts to the scoop to add some strength
Buffs Fan Posted January 7, 2018 Author Posted January 7, 2018 Next I mixed up my body filler... It was a great idea to make friends with the body man at my work
Buffs Fan Posted January 7, 2018 Author Posted January 7, 2018 And finally I spread the filler on the hood and had it smooth-ish until I went to set it down and it stuck to my glove and fell sticky side down so now my sanding will take a little longer than I want but its gotta be right I also filled a couple of small holes on the body where the lower trim was Thanks for looking and as usual any comments, suggestions or critiques are welcome
Buffs Fan Posted January 7, 2018 Author Posted January 7, 2018 OK I got the first of many sanding sessions done and it came out pretty good...
theraif Posted January 8, 2018 Posted January 8, 2018 are you sure about that chassis , it is a pro mod one and we all know them cars aint pro mods
Buffs Fan Posted January 10, 2018 Author Posted January 10, 2018 On 1/7/2018 at 11:30 PM, theraif said: are you sure about that chassis , it is a pro mod one and we all know them cars aint pro mods You got me
Buffs Fan Posted January 12, 2018 Author Posted January 12, 2018 So I got a little bench time in this morning before having to go get a tooth pulled This first picture is of the second coat of filler on the cowl hood it still needs to be sanded down
Buffs Fan Posted January 12, 2018 Author Posted January 12, 2018 Next I started on the power plant the motor is a donor out of the Revell Fireball Firebird match racer I removed the Liberty transmission and used it on another build so for this I am using a resin TH400 that I got from Morgan Automotive Detail (Very high quality piece)
Buffs Fan Posted January 12, 2018 Author Posted January 12, 2018 Once I got to the intake I realized that instead of a Tunnel ram style it was an ugly triangle box looking thing so I took the knife to it and made it look a little better the second pic is after painting it Thanks for looking and as always any comments, suggestions or critiques are welcome
DumpyDan Posted January 12, 2018 Posted January 12, 2018 Wow, this looks like good one to watch and I will
Buffs Fan Posted January 13, 2018 Author Posted January 13, 2018 20 hours ago, DumpyDan said: Wow, this looks like good one to watch and I will Thank you sir
NYLIBUD Posted January 14, 2018 Posted January 14, 2018 https://m.ebay.com/itm/Resin-Outlaw-Hood-70-Monte-Carlo-SS-454-AMT-1-25-New-/121785089292.. Great job so far.Cant wait till it's done.But just FYI,I found this resin hood on Lex's resin hoods.Maybe it can help u out.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now