landman Posted October 30, 2019 Author Posted October 30, 2019 (edited) Cosworth DFX, as found in the March 86C. DOHC V8, 161 cu.in./720 hp. Edited October 30, 2019 by landman
landman Posted November 25, 2019 Author Posted November 25, 2019 Oldsmobile OW-43. DOHC V8, 455 cu.in/ 700 hp.
landman Posted February 3, 2020 Author Posted February 3, 2020 Pratt & Whitney R-1860, 9 cylinder air cooled radial, 1860 cu.in./ 575 hp. 1
landman Posted March 27, 2020 Author Posted March 27, 2020 Ford FE 427, 1968 Nascar engine from a Torino Talladega. OHV V8, 427 cu.in./335 HP.
AmericanMuscleFan Posted March 30, 2020 Posted March 30, 2020 Well, that's a mind bogging engine collection, all of each well built and documented! I can't figure out the amount of hours (days, months, years...) spent in this AMAZING collection... There's always someone to surprise us in this hobby! Thanks for sharing!
landman Posted April 4, 2020 Author Posted April 4, 2020 Chevrolet 427 hot rodded with MSD induction.
landman Posted April 25, 2020 Author Posted April 25, 2020 (edited) 1936 Fairbabnks-Morse Z (Hit & Miss) engine. Loosely copied on a friend's. Edited April 25, 2020 by landman
AmericanMuscleFan Posted April 25, 2020 Posted April 25, 2020 Superb job Pat! The stationary engine is particularly beautiful and a really nice representation of the real thing! Well done...again sir!!!
landman Posted May 13, 2020 Author Posted May 13, 2020 Offenhauser 220. DOHC L4, 251 cu.in/ 420 hp. From a gift by Gary McNutt .
AmericanMuscleFan Posted May 13, 2020 Posted May 13, 2020 Nice job Pat. I really love the shifter on the transmission. Sorry to be so ignorant but I was wondering to know the vehicle and model year this engine was in use? I'm just curious...!
landman Posted May 13, 2020 Author Posted May 13, 2020 (edited) 23 minutes ago, AmericanMuscleFan said: Nice job Pat. I really love the shifter on the transmission. Sorry to be so ignorant but I was wondering to know the vehicle and model year this engine was in use? I'm just curious...! The offenhauser engines were used mostly at Indianapolis and in midget racers. This one comes from a midget kit. I believe its designoriginated from the Miller racers of the 30’s. Others might pipe up and correct me if I am mistaken. Edited May 13, 2020 by landman
landman Posted May 21, 2020 Author Posted May 21, 2020 Continental TS325 Gas turbine as used in the Howmet racing cars. 2 stage gas turbine, 2900cc/350 hp. This engine could reach 57,000 rpm. It is a gift from fellow member Jack Lira (Jack L).
Jack L Posted May 21, 2020 Posted May 21, 2020 11 hours ago, landman said: Continental TS325 Gas turbine as used in the Howmet racing cars. 2 stage gas turbine, 2900cc/350 hp. This engine could reach 57,000 rpm. It is a gift from fellow member Jack Lira (Jack L). looks good, glad to contribute
landman Posted June 18, 2020 Author Posted June 18, 2020 Buick Naihead 425. OHV425 cu.in, six Stromberg carbs. Engine is from the Showboat kit. Carbs and intake are by our Chris Drysdale. https://www.shapeways.com/product/GV8RNRK6Q/nailhead-intake-pack-2?optionId=109918066&li=ostatus
landman Posted July 5, 2020 Author Posted July 5, 2020 Caterpillar 3406 . 6 cyl. 4 stroke diesel, 893 cu.in./ 250-402 hp.
grodudulle77 Posted July 5, 2020 Posted July 5, 2020 Hello Pat , nice work on details !! ??It’s not the original gear box, where does it come from ? Philippe.
landman Posted July 5, 2020 Author Posted July 5, 2020 5 hours ago, grodudulle77 said: Hello Pat , nice work on details !! ??It’s not the original gear box, where does it come from ? Philippe. Merci Philippe. The original transmission of the kit looked like this. I had cut it off when I set that engine up for the diorama. The one I put on is likely one I had removed from one of the truck engines in this thread. It represents a Fuller Roadranger.
grodudulle77 Posted July 5, 2020 Posted July 5, 2020 (edited) Ok Pat, i ever saw this gear box with other engine . I always thought that the maximum engine power of the 3406 was much higher ! 400 hp, it’s good to know. ? Edited July 5, 2020 by grodudulle77
landman Posted July 5, 2020 Author Posted July 5, 2020 15 minutes ago, grodudulle77 said: Ok Pat, i ever saw this gear box with other engine . I always thought that the maximum engine power of the 3406 was much higher ! 400 hp, it’s good to know. ? This is where I got it. it is for a marine engine. Not sure if the truck engines were different.
landman Posted July 5, 2020 Author Posted July 5, 2020 Looks like the truck version is less powerful.
grodudulle77 Posted July 5, 2020 Posted July 5, 2020 Merci beaucoup Pat , i think that the 3406 Cat ( of the 359 Pete snap tite) has only 325 hp because it is only turbocharged and not aftercooled , i always wondered how many hp for this Pete . Thanks a lot for the documents and the Caterpillar data ! ??. Philippe.
landman Posted July 6, 2020 Author Posted July 6, 2020 5 hours ago, slusher said: Impressive engine builds Pat, I enjoy seeing them!! ?
landman Posted July 11, 2020 Author Posted July 11, 2020 Dodge Red Ram hot rod engine. Supercharged OHV V8, 270 cu.in./ 183 hp. From a junk engine with the help of the Parts Pak 392.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now