f.o.t.k. Posted September 19, 2008 Posted September 19, 2008 What do you guys think of Machine Aluminuim Specialties returning as a aftermarket supplier? I will be taking over for Mark in the near future and picking up where he left off. And returning with the same great product. I will be posting my email address soon . Stay tuned for updates. Thank you
RodBurNeR Posted September 19, 2008 Posted September 19, 2008 I think it would be nice. I have used some of the product a few years ago and would have continued to buy some if it didn't disappear. The problem now is there is much more available at higher quality. I am sure you are aware of that though. I forget what there was before, but i am sure it will be successful as long as the product is nice, fair priced and shipped fast. (reliability seems to be the most important)
my80malibu Posted September 19, 2008 Posted September 19, 2008 Mark has a wonderful product line and I am very pleased with the quality of the product's that I have received Gabriel.
LOBBS Posted September 19, 2008 Posted September 19, 2008 What do you guys think of Machine Aluminuim Specialties returning as a aftermarket supplier? I will be taking over for Mark in the near future and picking up where he left off. And returning with the same great product. I will be posting my email address soon . Stay tuned for updates. Thank you I've ordered from Mark several times in the past and always been happy with the products.
RyanSilva Posted September 19, 2008 Posted September 19, 2008 I miss the blower engine detail set from MAS.detail master version does not even come close to MAS!
george 53 Posted September 19, 2008 Posted September 19, 2008 MAS is gone? I din't know that. I bought his door hinges, and leaf spring kits, and they were great! I hope the next gentleman that puts the product out using the name does a similar job of quality, caz those parts were just about perfect!Good Luck!
Tom Kren Posted September 19, 2008 Posted September 19, 2008 YES YES YES!!!! Mark put out some of the best stuff I loved his wheels and other parts too I still use his stuff on my builds YES I would like you to come back!
Fuel Coupe Posted September 28, 2008 Posted September 28, 2008 I'm a huge fan of Machined Aluminum Specialties stuff. I haven't been able to purchase anything since I returned to the hobby. It will be nice to see its come back. ADD ME TO THE LIST PLEASE!!!!!!
cruzn Posted September 28, 2008 Posted September 28, 2008 What do you guys think of Machine Aluminuim Specialties returning as a aftermarket supplier? I will be taking over for Mark in the near future and picking up where he left off. And returning with the same great product. I will be posting my email address soon . Stay tuned for updates. Thank you Terry.. will that be the complete Line?? the Machined Parts as well as the Phot etch?? I hope so I really Love the Fuel cars detail kits .. the best In the business. Mark has great words for You takin on the Venture.
CarModDave Posted September 28, 2008 Posted September 28, 2008 (edited) Add me to the list of those who would love to see the MAS product line back on the market. Mark had some one-of-a-kind items and I was hoping that someone would be able to acquire the line. Best of luck and I'll eagerly await the return of MAS! What do you guys think of Machine Aluminuim Specialties returning as a aftermarket supplier? I will be taking over for Mark in the near future and picking up where he left off. And returning with the same great product. I will be posting my email address soon . Stay tuned for updates. Thank you Edited September 28, 2008 by CarModDave
RadRidesByDan Posted September 30, 2008 Posted September 30, 2008 (edited) He has great products for sure.....Forgive me for being a little gloomy.......but what detoured me away was the excuses and lack of communications regarding very slow shipping. If you can hold true to your word of improved customer services and shipping after you take over for Mark.....I will be glad to order again from MAS Bear Edited September 30, 2008 by RadRidesByDan
MADmodelDOCTOR Posted September 30, 2008 Posted September 30, 2008 i've sent a few sizable orders in the last couple of years. Everything arrived within 2 weeks. And great stuff as well. Bring'em on. later, Kenny
f.o.t.k. Posted October 1, 2008 Author Posted October 1, 2008 Terry.. will that be the complete Line?? the Machined Parts as well as the Phot etch?? I hope so I really Love the Fuel cars detail kits .. the best In the business. Mark has great words for You takin on the Venture. Hi Dewayne, yes I'm going to be offering the complete line of MAS products , Me and Mark are in the process of transfering everything , next week I'm meeting Mark in Toledo and picking up all of the product and moving everything down to Wilson , North Carolina were I reside. Then if everything goes as plan should be up and running by Nov 1st. Thanks for your support and please spread the word. Oh ya the website will still be there just with a few changes made to it . Thanks again Terry Kinnear
f.o.t.k. Posted October 1, 2008 Author Posted October 1, 2008 He has great products for sure.....Forgive me for being a little gloomy.......but what detoured me away was the excuses and lack of communications regarding very slow shipping. If you can hold true to your word of improved customer services and shipping after you take over for Mark.....I will be glad to order again from MAS Bear Hi, Bear thanks for your support, We will again offer some of the best photo etched and machine aluminuim products avalible ,And you can rest assured that shipping will be in a timely manner . Thanks again and looking forward to hearing from you soon. Terry Kinnear
f.o.t.k. Posted October 2, 2008 Author Posted October 2, 2008 Please hurry I need more 6707 rim blanks! Hi Tom ,thanks for your intrest ,stay tuned hopefully With no complications Nov 1st should be a go. Thanks Terry Kinnear
cruzn Posted October 2, 2008 Posted October 2, 2008 Hi Dewayne, yes I'm going to be offering the complete line of MAS products , Me and Mark are in the process of transfering everything , next week I'm meeting Mark in Toledo and picking up all of the product and moving everything down to Wilson , North Carolina were I reside. Then if everything goes as plan should be up and running by Nov 1st. Thanks for your support and please spread the word. Oh ya the website will still be there just with a few changes made to it . Thanks again Terry Kinnear Terry... will you be offering Mail order as well as at shows?
f.o.t.k. Posted October 2, 2008 Author Posted October 2, 2008 Terry... will you be offering Mail order as well as at shows? Hi Dewayne, yes Sir, mail order will be a big part of my buisness along with select shows. Thanks for the question,Dewayne if there's any other questions you may have just let me know. Terry Kinnear
oldman23 Posted October 8, 2008 Posted October 8, 2008 (edited) What do you guys think of Machine Aluminuim Specialties returning as a aftermarket supplier? I will be taking over for Mark in the near future and picking up where he left off. And returning with the same great product. I will be posting my email address soon . Stay tuned for updates. Thank you I would be one of the happiest guys in Arizona if MAS reopened. The last time I talked to Mark was in July and He was overworked and his health was suffering because of it. He was supposed to send me an adapter he made for me along with some rod in an envelope, But I guess he forgot about it. He told me he was closing for awhile back in July when he had to cancel my order I had in with him. I usually spent about $100. a month with him. If you put out the same quality and item selection he did I'll be just as loyal to you. I have never received a poor quality part from him and as for the price, Well some people think his parts are high but I always thought they where reasonable for the good quality and specific parts he offered like the Nascar 16 pc disc brake rotor and hub kit including drill jig for installing wheel studs, and his multi piece photo etched disc brakes to go with them, Or his photo etched 4 link Kit. Nobody even comes close to the realism and quality he offered. Please E-Mail me info on when you are reopening. Please send it to ernie-p@cox.net If you talk to Mark please ask him about my adapter and rod. it's probably on the the frig or something Looking forward to the re-opening Oldman23 alis Ernie Edited October 8, 2008 by oldman23
RadRidesByDan Posted October 9, 2008 Posted October 9, 2008 Hi, Bear thanks for your support, We will again offer some of the best photo etched and machine aluminuim products avalible ,And you can rest assured that shipping will be in a timely manner . Thanks again and looking forward to hearing from you soon. Terry Kinnear Really glad you responded to my reply. I do appreciate that you are going to bring back the excellent line of parts with some new add ons, and upgrade the service. All of your hard work will be very appreciated by me in the long run. Always good to be able to buy great products. Thank for the reply
BKIN10SECS Posted October 9, 2008 Posted October 9, 2008 Is this the same Terry who was known for his panel pro street builds? And was part of R&R resin?. If so....add my to the list...you have been around this hobby for a long time and on that level of model building that knows what it takes. Best of luck with this endevor.
Fuel Coupe Posted November 18, 2008 Posted November 18, 2008 Just got this small order from Terry at MAS YOU ROCK BRO!!!
58 Impala Posted November 18, 2008 Posted November 18, 2008 I'd like to have a current Web site or address along with products and prices. I would like to have a couple of those Top Fuel wheel sets for some of my builds. Anyone have any info out there?
CarModDave Posted November 19, 2008 Posted November 19, 2008 I'd like to have a current Web site or address along with products and prices. I would like to have a couple of those Top Fuel wheel sets for some of my builds. Anyone have any info out there? Same web address as always: http://www.mas-parts.com/ New snail mail address on the contact page.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now