wardsmodelbuilder Posted June 2, 2020 Posted June 2, 2020 (edited) Hello all, this is my new topic which is going to be for one of my all time favourite kit builds. I was delighted to accept this commission build and thought it was definitely one to share, I will try and keep this as up to date as possible given that Im very busy at the moment with several builds on the go. The model is going to represent Ronnie Peterson's final drive to victory at the 1978 Austrian GP. After spending a good long while organizing all the parts, I made a start on the engine block. Very early stages but the engine is coming together nicely, still a lot of detailing to be done. Thats all for now, back to the bench to start on the chassis, and the thousand of rivets that need to be added!!! Thanks Chris www.wardsmodelbuilder.com wardsmodelbuilder@outlook.com Edited June 2, 2020 by wardsmodelbuilder
beeRS Posted June 3, 2020 Posted June 3, 2020 Wow Chris. I love MFH kits. You've made a good start there. Looking forward to seeing your progress. I'll be following.
wardsmodelbuilder Posted July 9, 2020 Author Posted July 9, 2020 Been a little while since I updated this thread so here is a progress report on the Lotus 79. More engine work now completed, wiring starting to go together, Lots of very small pieces that take a lot of time to both get prepared and then applied. Well worth the effort though as its turning into a very well detailed piece. Also I have just about done all the rivets in the three main chassis pieces. All of which need to be drilled and placed individually. These pieces are all to be rubbed down and polished except for the side section on the front area of the chassis that needs to be painted black. This is the next step and then the front suspension and inner chassis details can start to be added. Thanks Chris http://www.wardsmodelbuilder.com wardsmodelbuilder@outlook.com
Codi Posted July 26, 2020 Posted July 26, 2020 Man there sure are a lot of interesting and wonderful builds in this category right now and yours, Chris, is another one. Great work! cheers, tim
wardsmodelbuilder Posted August 30, 2020 Author Posted August 30, 2020 Here is an update on the progress on the Lotus 79. This thread is a little behind actually progress of the build so I will try and update it in the coming days. I have now completed all the rivet work on the main chassis section, which has also been painted and lacquered half in black body colour. If you build this kit it is good to keep in mind that not enough rivets are supplied so more will need to be purchased. In the photo you can also see the inner parts of the front chassis have been added as well as the pedals. And, finally the front suspension, wheel hubs, brakes and steering arms have started to go together. A little more detailing is required around this area but I should now be able to more forward and towards getting the cockpit, dash and seat in place. Thanks Chris www.wardsmodelbuilder.com wardsmodelbuilder@outlook.com
wardsmodelbuilder Posted October 20, 2020 Author Posted October 20, 2020 Hello all, its been a little while since I last updated this post of the Lotus 79 so here is a progress report on what I've done to this point. There was a delay in finishing up the cockpit as there isn't enough rivets included in the kit so we had to purchase more which took a little time to arrive. Having said that the cockpit panels are now finished, all riveted and ready for the dash and seat to be added. I have also added the front brake cylinders, and added some pipes from those to the front callipers. The battery is also in place and the wiring that leads up to the dash which is currently wip and will be added next. The gearbox has been added to the engine ready for the rear suspension to be built up. I have most of the bodywork painted which I was working on while I waited for the rivets to arrive so I am hoping I will be able to move this project on pretty quickly in the coming weeks. Thanks Chris http://www.wardsmodelbuilder.com wardsmodelbuilder@outlook.com
Bainford Posted October 24, 2020 Posted October 24, 2020 Wow! It's coming along nicely. There is a lot of realism in the textures.
wardsmodelbuilder Posted November 8, 2020 Author Posted November 8, 2020 Hi all, here are a few more photos on the Lotus 79 project. I have now finished off the rear suspension. Went together pretty well, although as with all these kits there was a little adjusting required. I've been playing with the cockpit for a while now and have all the pieces fitting well. So next step will be to finish off the dash and seat, and take the plunge by fixing the engine and gearbox permanently to the chassis. Back to the bench.... Chris http://www.wardsmodelbuilder.com wardsmodelbuilder@outlook.com
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now