The Journey Begins

[Donny]

Just found Tamiya TS85 Ferrari Red, think that would look pretty special, if I can get it on right.

[Donny]

Can I use polycarbonate sprays on the exterior of a model?

 

[Cool Hand]

1 hour ago, Donny said:

I was thinking a deep red, maroonish color

Traditional style hot rod. The Maroon would look great

 

Tamiya TS-11 Maroon is a nice colour.

An example of that colour I applied to a 69 Camaro

 

 

1 hour ago, Donny said:

Just found Tamiya TS85 Ferrari Red, think that would look pretty special, if I can get it on right.

The street rod style, like the kit box art. The Red on 40 Ford will look good.

 

57 minutes ago, Donny said:

Can I use polycarbonate sprays on the exterior of a model?

 

Use the Tamiya TS spray cans, they are specifically formulated to use on kit styrene. And are much more user friendly 

[Donny]

9 hours ago, Cool Hand said:

Traditional style hot rod. The Maroon would look great

 

Tamiya TS-11 Maroon is a nice colour.

An example of that colour I applied to a 69 Camaro

 

 

The street rod style, like the kit box art. The Red on 40 Ford will look good.

 

Use the Tamiya TS spray cans, they are specifically formulated to use on kit styrene. And are much more user friendly 

Really like that red, I can feel a change of mind coming up. It's sort of a orange red, I really like that, thanks. I ordered the TS85, but that can be for another day if I change my mind.................mmmmm. What code is that red?

[Donny]

10 hours ago, Cool Hand said:

Traditional style hot rod. The Maroon would look great

 

Tamiya TS-11 Maroon is a nice colour.

An example of that colour I applied to a 69 Camaro

 

 

The street rod style, like the kit box art. The Red on 40 Ford will look good.

 

Use the Tamiya TS spray cans, they are specifically formulated to use on kit styrene. And are much more user friendly 

Been on different sites on the 'net, cannot find that color, can you give me the TS please. 

[Cool Hand]

3 hours ago, Donny said:

What code is that red?

 

3 hours ago, Donny said:

cannot find that color, can you give me the TS please. 

Closest would probably be Tamiya TS-49 bright red.

And TS-46 light sand would look good for the interior seats and inner door panels, and carpet XF-59 desert yellow.

Edited yesterday at 01:45 AM by Cool Hand

[Donny]

33 minutes ago, Cool Hand said:

 

Closest would probably be Tamiya TS-49 bright red.

And TS-46 light sand would look good for the interior seats and inner door panels, and carpet XF-59 desert yellow.

Yep, I looked at that earlier, and TS31 bright orange, hard to decide which is best. It's hard to tell with the samples on the websites, they give you two different colors, with the TS31, the color sample on the rattle can lid is closer than the sample   they show. I think I'll get them both and do the spoon test and see which one I like/closest and go with that. With the trim, semi-gloss or flat? 

One more question and I'll get out of your face, painting small parts, fuel pumps, distributors, that sort of thing. I've used Tamiya satin, semi-gloss, etc, can't continue to do because of the fumes, even on those little bottles that are solvent based. I tried water-based acrylics that don't work so well, so do I   have to primer them first, bit hard, because of a paint build up destroying the detail. How do you get around that? Airbrushing would use a hell of a lot of paint.

Thanks for your patience mate, if you can help me here, I'll leave you alone until the next build. 🙄😂

[Cool Hand]

Yeah try find pictures of models painted the colour you are looking for, as that will give you a better idea of how it looks. Most of the TS paint tones a pretty close to the cap/lid, it just might be a shade darker or lighter.

 

3 hours ago, Donny said:

One more question and I'll get out of your face, painting small parts, fuel pumps, distributors, that sort of thing. I've used Tamiya satin, semi-gloss, etc, can't continue to do because of the fumes, even on those little bottles that are solvent based. I tried water-based acrylics that don't work so well, so do I   have to primer them first, bit hard, because of a paint build up destroying the detail. How do you get around that? Airbrushing would use a hell of a lot of paint.

Thanks for your patience mate, if you can help me here, I'll leave you alone until the next build. 🙄😂

Yeah unfortunately the hobby paints will have strong fumes. Water based acrylics will work for certain applications, But the Lacquer and alcohol based acrylics will give the best results.

With your condition it would be best to always wear a mask/respirator when applying paint even when using the spray booth or using spray cans outdoors. If you do small batches at a time it will be less overwhelming.

For smaller parts I airbrush surfacer/primer, that way there is more control over the amount of primer being applied. And then airbrush the paint colours. Generally use less paint with the airbrush, as it provides more control with the coverage. Some parts would only require a couple drops of paint and thinner, flush the airbrush and move onto the next colour. 

Its okay, we will try help where we can. It will take you a couple builds to become familiar with the materials and processes. 

 

 

 

[Donny]

12 minutes ago, Cool Hand said:

Yeah try find pictures of models painted the colour you are looking for, as that will give you a better idea of how it looks. Most of the TS paint tones a pretty close to the cap/lid, it just might be a shade darker or lighter.

 

Yeah unfortunately the hobby paints will have strong fumes. Water based acrylics will work for certain applications, But the Lacquer and alcohol based acrylics will give the best results.

With your condition it would be best to always wear a mask/respirator when applying paint even when using the spray booth or using spray cans outdoors. If you do small batches at a time it will be less overwhelming.

For smaller parts I airbrush surfacer/primer, that way there is more control over the amount of primer being applied. And then airbrush the paint colours. Generally use less paint with the airbrush, as it provides more control with the coverage. Some parts would only require a couple drops of paint and thinner, flush the airbrush and move onto the next colour. 

Its okay, we will try help where we can. It will take you a couple builds to become familiar with the materials and processes. 

 

 

 

Thanks mate, sorry to be a pain, you have better things to do than helping me. Yeah I have a mask, but just bought a better one, and I just bought a fan that I hope will blow a lot of the fumes away. With all that maybe my situation might improve.

Edited 21 hours ago by Donny

[stitchdup]

2 hours ago, Donny said:

Thanks mate, sorry to be a pain, you have better things to do than helping me. Yeah I have a mask, but just bought a better one, and I just bought a fan that I hope will blow a lot of the fumes away. With all that maybe my situation might improve.

the warhammer/citadel type paints are low fumes

[Donny]

49 minutes ago, stitchdup said:

the warhammer/citadel type paints are low fumes

Thanks Les, appreciate your help as you personally know the situation.