Katsusauce Posted July 29 Posted July 29 Started by stripping the chrome off of almost everything. First up, the supercharger. 8
Katsusauce Posted July 31 Author Posted July 31 15 hours ago, Moparman18064 said: Blower, hat, linkage, injection all look amazing Thank you 🙏
Katsusauce Posted July 31 Author Posted July 31 Got a lot of the motor assembled. Not using any of the tubes, and wires that came with the kit. 5
Katsusauce Posted July 31 Author Posted July 31 3 hours ago, MeatMan said: Killer detail, and top notch paint work! Thanks 🤙
NerdmanB Posted July 31 Posted July 31 Very nice detail on the engine. I will be following this build. 1
Katsusauce Posted August 1 Author Posted August 1 4 hours ago, NerdmanB said: Very nice detail on the engine. I will be following this build. Thanks man 🙏
Katsusauce Posted August 1 Author Posted August 1 Not sure if it's correct, but i fabricated a lever for the shut-off valve. 3
Dragline Posted August 3 Posted August 3 All of it looks great. You must have filled the braided line with something. It looks very good. 1
Katsusauce Posted August 4 Author Posted August 4 On 8/3/2025 at 3:03 AM, Dragline said: All of it looks great. You must have filled the braided line with something. It looks very good. Thanks. Yes I put some wire through them. 1
Katsusauce Posted August 4 Author Posted August 4 I got a lot done over the past few days. I shot the chassis with Roth "Bad Azz Blue" metal flake, the holes in the fuel cell were filled in and drilled new holes in it and painted it with Splash Paints Aluminum Metalizer. Made the seat belts harness and transmission blanket straps, ran the fuel and oil lines, mounted the motor, and headers. 4
Katsusauce Posted August 4 Author Posted August 4 1 hour ago, sah5150 said: Engine looks phenomenal! Great job! Thanks 🤙
Moparman18064 Posted August 7 Posted August 7 Outstanding! The attention to details and painting are fabulous. 1
Katsusauce Posted August 8 Author Posted August 8 8 hours ago, Moparman18064 said: Outstanding! The attention to details and painting are fabulous. 🙏🙏🙏
Katsusauce Posted August 11 Author Posted August 11 So here's I'm using only the ends of the plastic steering linkages and lateral bars, drilled holes in them and attached them to stainless steel rods that have been cut to the appropriate lengths. 3
Katsusauce Posted Sunday at 05:45 PM Author Posted Sunday at 05:45 PM (edited) Chassis is pretty much done. Wheels are from Dancing Bear Scaled Components. Edited yesterday at 05:17 AM by Katsusauce 3
meechum68 Posted Sunday at 09:06 PM Posted Sunday at 09:06 PM 3 hours ago, Katsusauce said: Chassis is pretty much done. Wheels a re from Dancing Bear Scaled Components. I can hear this idling in prep for burnout! 1
FoMoCo66 Posted Sunday at 09:13 PM Posted Sunday at 09:13 PM Amazing work, do you mind me asking what you use for your braded line and a/n fittings? 1
Katsusauce Posted yesterday at 05:20 AM Author Posted yesterday at 05:20 AM 8 hours ago, FoMoCo66 said: Amazing work, do you mind me asking what you use for your braded line and a/n fittings? The braided lines are from Detai Master, same as the AN Fittings. The 90° AN Fittings are 3d printed parts.
Twokidsnosleep Posted 15 hours ago Posted 15 hours ago Stupendous! This is an an amazing build 👍🏻😎❤️ 1
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now