Glen G. Posted September 30, 2009 Posted September 30, 2009 does the truck have to be lowered? i was thinking of taking mine in an elevated direction and it doesnt seem like anyone else in the build off is going that way. it is still a street truck in its own rights, i know there is lots where i am from!
diymirage Posted September 30, 2009 Posted September 30, 2009 does the truck have to be lowered? i was thinking of taking mine in an elevated direction and it doesnt seem like anyone else in the build off is going that way. it is still a street truck in its own rights, i know there is lots where i am from! mine wil sit a little higher on its wheels aswell because im building a custom ladder frame and thought tubbing it was just to much work also, i didnt wanna cut up my bed, i put a lot of work into it allready you see
Guest JamesDE Posted September 30, 2009 Posted September 30, 2009 This is looking tempting Is their a dead line for entries? I dont think there is a deadline. Just let dukefan know that you want in, and Im sure you can still join. What were you planning on building??
dwc43 Posted September 30, 2009 Posted September 30, 2009 PLEASE READ THE RULES CAREFULLY Rules 1. has to be a pickup 2. has to have a factory style bed 3. truck had to been produced after 1960 4. no 4cyl's 5. has to be finished in the dead line dead line December 31st at 12:00am central , so let me know what you guys think. It's the very first post on the first page guys.
CHR1S619 Posted September 30, 2009 Posted September 30, 2009 Well if it's ok, I would like to enter a 72 chevy c-10
Nick Winter Posted September 30, 2009 Author Posted September 30, 2009 This is looking tempting Is their a dead line for entries? here is read the first post. does the truck have to be lowered? i was thinking of taking mine in an elevated direction and it doesnt seem like anyone else in the build off is going that way. it is still a street truck in its own rights, i know there is lots where i am from! Not really It could be lifted or lowered.
Nick Winter Posted September 30, 2009 Author Posted September 30, 2009 mine wil sit a little higher on its wheels aswell because im building a custom ladder frame and thought tubbing it was just to much work also, i didnt wanna cut up my bed, i put a lot of work into it allready you see I like how your sits, reminds me of a factory truck. I dont think there is a deadline. Just let dukefan know that you want in, and Im sure you can still join. What were you planning on building?? There is a deadline but it's not until December 31st James.
Nick Winter Posted September 30, 2009 Author Posted September 30, 2009 PLEASE READ THE RULES CAREFULLY Rules 1. has to be a pickup 2. has to have a factory style bed 3. truck had to been produced after 1960 4. no 4cyl's 5. has to be finished in the dead line dead line December 31st at 12:00am central , so let me know what you guys think. It's the very first post on the first page guys. yep that's what I said. Well if it's ok, I would like to enter a 72 chevy c-10 could you do me a favour please, NEVER POST A PIC LIKE THAT IN MY PRESENCE AGAIN, I got a river of drool around me.
CHR1S619 Posted September 30, 2009 Posted September 30, 2009 could you do me a favour please, NEVER POST A PIC LIKE THAT IN MY PRESENCE AGAIN, I got a river of drool around me. I'll post up a picture of all my trucks later tonight for you
Nick Winter Posted September 30, 2009 Author Posted September 30, 2009 I'll post up a picture of all my trucks later tonight for you Ok.
Guest Mustang3.8 Posted September 30, 2009 Posted September 30, 2009 yep that's what I said. could you do me a favour please, NEVER POST A PIC LIKE THAT IN MY PRESENCE AGAIN, I got a river of drool around me. Nice. i'm with DukeFan. I'm likin' that Blazer.
CHR1S619 Posted September 30, 2009 Posted September 30, 2009 Nice. i'm with DukeFan. I'm likin' that Blazer.
CHR1S619 Posted October 1, 2009 Posted October 1, 2009 Well I'm going with a 72 c-10 long bed. This is the idea I will put my flavor into it
CHR1S619 Posted October 1, 2009 Posted October 1, 2009 Well I went the easy way on the frame. I was thinking of making a frame for it but, I just cut the floor out.
Jared Roach Posted October 7, 2009 Posted October 7, 2009 hey Dukefan69', I know I still haven't posted any thing on the scout but I have to withdraw from the contest. I just don't have time between school and other builds that have to be finished before the scout. I appreciate you letting me join but I just don't have time and I am going to scratch build almost everything on it since I'm turning it prostreet. Thanks again and you guys will see it again.
Nick Winter Posted October 7, 2009 Author Posted October 7, 2009 (edited) hey Dukefan69', I know I still haven't posted any thing on the scout but I have to withdraw from the contest. I just don't have time between school and other builds that have to be finished before the scout. I appreciate you letting me join but I just don't have time and I am going to scratch build almost everything on it since I'm turning it prostreet. Thanks again and you guys will see it again. Ok you can withdraw. No hard feelings on my end, just post some pic's here when you do finish it. BTW it's not a contest just a community build, just a bunch of us building something similar toghether. Edited October 7, 2009 by Dukefan69'
Jared Roach Posted November 11, 2009 Posted November 11, 2009 I see that this build off has died off like most do. Is there any updates anybody? I always liked watching this thread and hpe people will start posting again.
Nick Winter Posted November 11, 2009 Author Posted November 11, 2009 I see that this build off has died off like most do. Is there any updates anybody? I always liked watching this thread and hpe people will start posting again. Jared I was going to ask the samething. Now back into drill sargent mode All Participants please report to my office , now that we've had some fun I thought I'd talk to you folks about what's barrelling down on us it's the cut off for all finished trucks, now what's going on fella's, I'd like to see some progress, ok guys, now get to it.
diymirage Posted November 11, 2009 Posted November 11, 2009 i have been working very hard unfortunatly most of that work has gone to the house and updating my heavy metal christmass album just for the the record : theocracy is AWESOME their music rocks and every year they put out a free christmass track but i digest i havent had anytime to work on the truck but in my defence if i make the deadline i am only 4 out of 5 rules i can break....and i want this to be perfect
Nick Winter Posted November 11, 2009 Author Posted November 11, 2009 i have been working very hard unfortunatly most of that work has gone to the house and updating my heavy metal christmass album just for the the record : theocracy is AWESOME their music rocks and every year they put out a free christmass track but i digest i havent had anytime to work on the truck but in my defence if i make the deadline i am only 4 out of 5 rules i can break....and i want this to be perfect Ok if you want to be the exception
rolltide Posted November 12, 2009 Posted November 12, 2009 If its not to late I will be building a Chevy SS R truck for this.
Nick Winter Posted November 12, 2009 Author Posted November 12, 2009 If its not to late I will be building a Chevy SS R truck for this. Sure you can join aslong as you can finish it before december 31st
wgflatliner Posted November 12, 2009 Posted November 12, 2009 if i had the windows for a 56 chevy stepside.. i'd be all over this. Alas, i won't be anywhere near done in time with the deadline. and i'm not sure i want to butcher an enzo ferrari to turn it into a truck althoughhhh i could...... just kidding. i look forward to seeing the finished products. IF (and that's a big if) i can get my stepside done, i'll get a last minute photo in. as of now, it's at work disassembled and ready for me to take home. anybody have any idea where i can source windows for this?
rollinoldskoo Posted November 12, 2009 Posted November 12, 2009 ok i've read thru this whole topic and seen all the builds and questions.... i want to enter also... does it need to be a fresh build or can i bring an older project back to the bench?
82k5 Posted November 12, 2009 Posted November 12, 2009 Well i'm a truck builder, go figure huh? Any way it's time for me to try something diffrent a street truck. So i thought why not have a street truck community build . PLEASE READ THE RULES CAREFULLY Rules 1. has to be a pickup 2. has to have a factory style bed 3. truck had to been produced after 1960 4. no 4cyl's 5. has to be finished in the dead line dead line december 31st at 12:00am central , so let me know what you guys think. Entries: 1978 dodge d100 street truck- Dukefan69'- finished 1978 dodge little red exspress- dwc43 1994 gmc sonoma- Kustommodels88 1995 ford ranger street truck- The Red Ranger 1962 ford unibody- Greg D. wildcart- diymirage 1990 chevy stepside- 67PontiacGTO 1999 chevy silverado- Glen G. 1955 chevy cameo- Mike MC 1968 or '69 dodge a-100 pickup. BigGary 1955 chevy pickup- Riz dodge deora - Demon9115 1999 chevy silverado- Toast 1995 toyota tundra- s10kid18 So are the two 55's in ? Rule # 3 states 60 and newer ?
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now