GaryM Posted April 17, 2010 Share Posted April 17, 2010 Can any body give some tips on material to be used for brake lines and fuel lines. This will be my first model to try and use lines of this sort. After about thirty years of modeling I figure its time to learn some new tricks. Thanx, Gary Quote Link to comment Share on other sites More sharing options...
Alyn Posted April 17, 2010 Share Posted April 17, 2010 Check your local Hobby Lobby, Michaels or other craft stores in the necklace and bead isle. You find spools of wire in a number of various guages that should work. Some guys use the finer diameter solder. You should be able to find this at Radio Shack. Quote Link to comment Share on other sites More sharing options...
GaryM Posted April 17, 2010 Author Share Posted April 17, 2010 Check your local Hobby Lobby, Michaels or other craft stores in the necklace and bead isle. You find spools of wire in a number of various guages that should work. Some guys use the finer diameter solder. You should be able to find this at Radio Shack. Thank You for the info for my question I have looked at that stuff before but never put 2+2 together. Thanx, Gary Quote Link to comment Share on other sites More sharing options...
Longbox55 Posted April 17, 2010 Share Posted April 17, 2010 I use beading wire as well. Don't be afraid to poke around the beading wire section, as that wire also comes in coated as well as bare silver. The black and red in the heaveir gauges makes exellent battery cables, I also use the black for brake, feul, and oil hoses. Quote Link to comment Share on other sites More sharing options...
GaryM Posted April 18, 2010 Author Share Posted April 18, 2010 Great Info I drive buy all of these business' everyday. THANX Quote Link to comment Share on other sites More sharing options...
Steve Keck Posted May 19, 2010 Share Posted May 19, 2010 Great Info I drive buy all of these business' everyday. THANX Try solid core solder about .023 inches. It's more forgiving and has a sheen close to stainless steel. 1 Quote Link to comment Share on other sites More sharing options...
envious8420 Posted May 19, 2010 Share Posted May 19, 2010 for hard lines i like to use guitar strings. they also have a polished looking finish. great for multiple carb setups Quote Link to comment Share on other sites More sharing options...
David G. Posted May 20, 2010 Share Posted May 20, 2010 Lately I've been using the inner wire from the twist-ties that come with the boxes of kitchen garbage bags. I just heat the plastic coating with a butane lighter to soften it up a bit then strip it off with my thumbnail. The wire inside is steel, so it has the right color for fuel and brake lines and seems to me, to be about the right size. It's also esy to work with and best of all it's free! 1 Quote Link to comment Share on other sites More sharing options...
Ragnar Posted May 20, 2010 Share Posted May 20, 2010 I also use Bead wire for fuel and brake lines. 60 guage insulated wire is great for wiring engines. Clear and Red Monofilament Fishing line works great for replicating the fuel lines used on Rods and Customs built during the 50s and early 60s. The wire from old electric motor armatures like the ones used in Slot Cars,Model Trains, and motorised toys makes good vacuum lines, and when coiled around a 1/16" rod makes great throtle return springs. Wound guitar strings look good on modern builds. 14-12 guage insulated wire makes good hoses. I preffer Solid wire instead of stranded as it is easier to work with, and holds shapes better. Top hat Diodes make great aircleaners for multi 2 barrel carb setups, but you can get this type of aircleaner from the aftermarket parts producers these days. Whenever you go into a Craft Shop, or a Shop like Radio Shack look around with thoughts of what can be used to detail your models. Craft shops can also be a source for very small dice and skulls used in jewellry making that make great gear shift nobs. Martha Stewart Puts out some very useful flocking that can be used for carpets, etc. In the Fabric section of craft stores you can get packages of printable very thin fabric, that can be used in interiors( Mexican Blankets,etc.) CHEERS! Quote Link to comment Share on other sites More sharing options...
MikeeD Posted May 20, 2010 Share Posted May 20, 2010 I just picked up 3 spools of wire from a guy that ties fishing flies, in 24, 26 and 28 gauge. In silver, gold and black respectively. Each spool has 40 yards on it and I paid like $2.00 apiece for them at a yard sale......just a thought. Quote Link to comment Share on other sites More sharing options...
KENNEDYJR Posted May 20, 2010 Share Posted May 20, 2010 Fishing line works well for making fuel lines, and it's available in a variety of colors. Red salt-water fishing line works especially well for representing the red fuel line that was often used on '50s and '60s rods and customs. (Thanks to Dave Zinn for that tip!) That's exactly what I need for a rat rod project-thanks. Quote Link to comment Share on other sites More sharing options...
pharr7226 Posted May 21, 2010 Share Posted May 21, 2010 I used wire from a twist tie for the fuel lines on this: I've also purchased various diameters of piano wire from my local Hobby Town that could be used for brake or fuel lines. Quote Link to comment Share on other sites More sharing options...
whale392 Posted May 21, 2010 Share Posted May 21, 2010 All above have been excellent ideas! I also use Safety Wire (being an aviation mechanic has some benefits to my hobby) for a lot of things. I have spools of .010", .020", .025", .032", .041" and some heavy .062" stuff, augmented by the bead wire in 24, 26, 28, and 30 gauge. We also have these things we use at work that are .032" braided cable.......when sprayed flat black can be used very effectively as cloth-wrapped lines. Also; the 20, 22, and 26 gauge twisted shielded wire we have can be used (once the plastic sleeve is stripped) for replicating braided line of various diameters. Quote Link to comment Share on other sites More sharing options...
midlineqb Posted November 10, 2022 Share Posted November 10, 2022 On 5/21/2010 at 5:47 PM, whale392 said: All above have been excellent ideas! I also use Safety Wire (being an aviation mechanic has some benefits to my hobby) for a lot of things. I have spools of .010", .020", .025", .032", .041" and some heavy .062" stuff, augmented by the bead wire in 24, 26, 28, and 30 gauge. We also have these things we use at work that are .032" braided cable.......when sprayed flat black can be used very effectively as cloth-wrapped lines. Also; the 20, 22, and 26 gauge twisted shielded wire we have can be used (once the plastic sleeve is stripped) for replicating braided line of various diameters. Where can I find these different types and sizes of wires? Thanks Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.