Romell R Posted February 18, 2012 Author Posted February 18, 2012 I'll make you some hats that are 4mm deeper next week. Hey Thx Jim Thats really nice of you! Now thats what I call excellent customer service. I was able to make the window net. First I had to make a jig so it would be stright heres what I came up with. hope you enjoyed ....
David G. Posted February 18, 2012 Posted February 18, 2012 Rommel, Are you sure those Brake / hub assemblies are correct? While doing research for my own build, i found these pics: Which Clearly show the Rotor bolted to the "ring" behind the Hub, not in front of it. I know you said that they wouldn't be seen when final assembled, but I know how you are a stickler for details.... When I first saw this, I thought it was a bench grinder!
MicroNitro Posted February 18, 2012 Posted February 18, 2012 Rommel, Are you sure those Brake / hub assemblies are correct? While doing research for my own build, i found these pics: Which Clearly show the Rotor bolted to the "ring" behind the Hub, not in front of it. I know you said that they wouldn't be seen when final assembled, but I know how you are a stickler for details.... Okay I have to figure out hot to mill these calipers. That would complete the wheels and brake rotors. Any ides or help Rom or Chris.
Romell R Posted February 18, 2012 Author Posted February 18, 2012 Okay I have to figure out hot to mill these calipers. That would complete the wheels and brake rotors. Any ides or help Rom or Chris. I sent you a PM Jim on the matter
jmpsebring Posted February 18, 2012 Posted February 18, 2012 Romell, have you been playing or reading or searching for forums on how to use your new mill? Are you starting from day 1 to learn as you go?
Romell R Posted February 18, 2012 Author Posted February 18, 2012 Romell, have you been playing or reading or searching for forums on how to use your new mill? Are you starting from day 1 to learn as you go? Ive been doing alot with my mill , mostly making 1:1 parts for my Hot Rod, as of right now though I dont have a workshop set up since the move.
Romell R Posted February 19, 2012 Author Posted February 19, 2012 Hey Fellas I made my drive shaft today with a little hep from some TDR/Shapeways parts heres the run down..... first I drilled out the end of the lenco Tranny to accept the shaft end the TDR/ Shapeways parts put together Here the brass tube is fitted, and I didnt have to grind the joint ends down like I exspected too.... everything has been painted ..... I made the shaft so that it can telescope for installation purposes.... I hope you enjoyed....
Romell R Posted February 19, 2012 Author Posted February 19, 2012 thought id show you where I was goin with the wheels....
Dragracer Posted February 19, 2012 Posted February 19, 2012 The driveshaft looks good Rom, really like the wheels.
Romell R Posted February 20, 2012 Author Posted February 20, 2012 Thanks much Richard & Tyrone the support is greatly appreciated
John Teresi Posted February 20, 2012 Posted February 20, 2012 Wow!!!! Romell.......looking good......and over 57 thousand views.......gotta be a MCM record?
comp1839 Posted February 20, 2012 Posted February 20, 2012 57,000.......unbelievable! that's a whole lota views!
Mooneyzs Posted February 21, 2012 Posted February 21, 2012 Rom... Man you are doing a wonderful job with all of this and you are killing this build. Keep up the awesome work. All of your hard efforts are sure showing with this build. You have some skills man!! Hey Jim... would it help you if I created a drawing for the calipers for you?? I could also send you the 3D model too. I should have extra time on my hands here really soon. I could probably design it so the caliper in is 2 pieces and the halves could be done basically the same with a couple of small details different. Let me know what I can do to help.
Dragracer Posted February 21, 2012 Posted February 21, 2012 Rom, since I've been gone for awhile & in coming back I noticed that you haven't painted the body yet, are you still going with the original paint scheme or have you changed it?
Romell R Posted February 21, 2012 Author Posted February 21, 2012 Rom, since I've been gone for awhile & in coming back I noticed that you haven't painted the body yet, are you still going with the original paint scheme or have you changed it? I still plan on the original paint plan ,....but who knows? Alot of things have changed and they are ever changing. We'll see what happens.
Guest Dr. Odyssey Posted February 21, 2012 Posted February 21, 2012 57,000.......unbelievable! that's a whole lota views! Its not how many times you swing the bat that counts, its how many times you actually hit the ball. - Albert Pujols
Romell R Posted February 22, 2012 Author Posted February 22, 2012 Its not how many times you swing the bat that counts, its how many times you actually hit the ball. - Albert Pujols AMEN to that!! I just thought I'd share what I just purchased for my next project (which will start promptly after this one is finished) enjoy , oh and check out there site they have some nice stuff for our type of builds. https://sites.google.com/site/tdrinnovations/c-1-16-model-car-kits/1-16-body-shop/1-16-dragracing/69-pro-mod-camaro-body
MoparWoman Jamie Posted February 22, 2012 Posted February 22, 2012 Hey Rom, when are you going to get back to that wrecker that you was building before? That was looking good.
eviltwincustoms Posted February 22, 2012 Posted February 22, 2012 AMEN to that!! I just thought I'd share what I just purchased for my next project (which will start promptly after this one is finished) enjoy , oh and check out there site they have some nice stuff for our type of builds. https://sites.google...mod-camaro-body Ok ROM, if you are going to go whole hog on that baby..... I will be looking for you to step it up into Over Drive for this next build! LOL... if that is even possible, you do some pretty amazing stuff. Especially with this new venture of yours into Brass. I read you have a Mill... you need to break that out and start cutting some scale stuff on it! Not just 1:1 stuff. I have been thinking about biting the bullet and getting a Sherline Mill and using Dave's tried and true technique on wheels. Maybe with the Camaro, I might have to spend some extra moohlaahh and get me one.
eviltwincustoms Posted February 22, 2012 Posted February 22, 2012 Hey Rom, when are you going to get back to that wrecker that you was building before? That was looking good. I read today over in the General Section, he is getting out from under that project and moving on... Probably because he just plopped down some cash on his new 69 camaro project. It is a sad day for sure, because just the couple of pages that I was reading up on it, ROM was doing some killer work on it to look like the newer Kenworth like in the TV series Wrecked for O'Hare Towing.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now