Yekoms Posted June 11, 2011 Share Posted June 11, 2011 Hi All, I like to see other folks ideas. Thanks to all that participate. This seems to work out OK so I'll pass it along. I'm learnin' as I go and this is just a couple things that I did with glues. I'd like to hear other ideas or thoughts. I'm likin' Tenax 7R but it sets too fast...Testor's Liquid sets to slow... a 50%/50% mix of the two is nice. The bond is strong. Testor's tube is stringy and thick... but on a palette a small blob of Testor's tube glue with a drop of Testors liquid mixed in mixes into a gel with no strings. It's curin' as I'm typin' this so the final results will come later. Smokey Quote Link to comment Share on other sites More sharing options...
MikeMc Posted June 11, 2011 Share Posted June 11, 2011 Hi All, I like to see other folks ideas. Thanks to all that participate. This seems to work out OK so I'll pass it along. I'm learnin' as I go and this is just a couple things that I did with glues. I'd like to hear other ideas or thoughts. I'm likin' Tenax 7R but it sets too fast...Testor's Liquid sets to slow... a 50%/50% mix of the two is nice. The bond is strong. Testor's tube is stringy and thick... but on a palette a small blob of Testor's tube glue with a drop of Testors liquid mixed in mixes into a gel with no strings. It's curin' as I'm typin' this so the final results will come later. Smokey Tenax is out of production again acording to a couple of LHS here in Atlanta...Bondene is a bit slower setting, pro weld is as fast as Tenax, Tamiya has two liquids regular and thin Quote Link to comment Share on other sites More sharing options...
Mark Posted June 11, 2011 Share Posted June 11, 2011 If both are solvent cements (in this case, they are) then you should have no problems mixing them. Both are probably made up of mostly the same chemicals, the slower curing one has something added to create that effect. I often use a 50/50 mix of Testors liquid and tube cements. The tube glue adds some thickness to the liquid, and the mix has the ability to fill minor gaps where 100% liquid cement does not. The mix can be applied to larger areas before it begins to evaporate. Quote Link to comment Share on other sites More sharing options...
Kit Basher Posted June 11, 2011 Share Posted June 11, 2011 I don't know about Tenax, but ProWeld and Testors liquid are two different chemicals. ProWeld is methylene chloride, the only thing I know of that will remove marine varnish. A really strong solvent, in other words. Testors is MEK, a solvent frequently used in lacquer and lacquer thinner, not as strong a solvent, and less volatile. Like Smokey says, only you can prevent forest fires. Oops! I mean Smokey says Tenax/ ProWeld is too fast, Testors too slow. I really like the idea of mixing the liquids, and mixing the liquid and the tube. Quote Link to comment Share on other sites More sharing options...
Yekoms Posted June 12, 2011 Author Share Posted June 12, 2011 The tube and liquid mix is strong also. Does ProWeld have a brush in the bottle? We just got home from dinner at a Thia place and we learned that soy sauce and brown sugar go good together also. Thanks for the input guys...Smokey Quote Link to comment Share on other sites More sharing options...
Kit Basher Posted June 12, 2011 Share Posted June 12, 2011 Pro Weld does have a brush in the bottle, although it's kinda stiff and big for some places. I use a little brush a lot of the time. I can't wait to try the tube/liquid mix. The tube stuff is necessary but it can be a pain in the shorts sometimes. Soy sauce and brown sugar, yum, yum! Throw some of those little red peppers in mine! Quote Link to comment Share on other sites More sharing options...
62rebel Posted June 18, 2011 Share Posted June 18, 2011 i seldom use straight red tube Testors for anything anymore; i mix it with MEK and put it in a clear jar... good for laminating strips where i need extended working time and quick sticking, but not the semi-permanent bond of ACC. i don't buy small bottles of cement, either, quart cans of MEK would equal out to several hundred dollars in Testor's money... Quote Link to comment Share on other sites More sharing options...
charlie8575 Posted June 20, 2011 Share Posted June 20, 2011 I might give this a try. I generally like the liquid, but usually find myself going for tube for the big assemblies, but the tube stuff isn't like it used to be...way too gooey. This might work well. I wonder if I could simply use the Testors cement bottle for storage? Charlie Larkin Quote Link to comment Share on other sites More sharing options...
Mooneyzs Posted June 24, 2011 Share Posted June 24, 2011 I have been a big fan of Weld-on #3. Been using it for years. it is similar to Tenax but they don't bottle it for the hobby industry anymore. I usually get a quart can from a plastics shop and it lasts me quite a while. Quote Link to comment Share on other sites More sharing options...
Pooreboyz Posted July 5, 2011 Share Posted July 5, 2011 I've been reading this post and am wondering whereis a good place to order some Styrene and glue? Also I'm new to the forum and can youtell me if there any videos on working with this styrene? Thanx PooreBoy'z Quote Link to comment Share on other sites More sharing options...
Foxer Posted July 5, 2011 Share Posted July 5, 2011 I get the idea of mixing glues for an in-between consistency, but, isn't that exactly what Testors Liquid Cement is? In any case, I'd never let the old tube glue in my house to start! : Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.