qmhd Posted December 15, 2011 Author Share Posted December 15, 2011 the transverse rear spring and 4 link aren't compatible. moving the radius rods to parallel the frame rails if you're going to keep the rear spring would be okay; but 4 links have to be parallel to each other or nearly so, and use coil springs more often than not. usually, the builder of a car would usually (not always, for sure) have the same type of suspension at each end of the car; hairpin rods up front and spread radius in back; or corvair up front, 4 link in back, later on in the '60's, and when Mustang II stuff came along it was popular to do parallel leaf springs out back and MII up front. of course, every builder had their own preferences. ferinstance: any time your car has radius rods from the front axle back to the trans x-member, it should have them from the rear axle also. there are steering dynamics at work in that arrangement that can't be dismissed. split the front bones, you must split the rear. Thanks for your kind remarks Now understand my mistakes and 'll correct them. I'll work with another axle (the red one misses details) My "selfish" desire is absolutely to preserve working with the transversal rear spring (I love so much the look) If you don't mind, I'll prepare a new mockup and If you've got time, it would be kind if you coud have a look at it Quote Link to comment Share on other sites More sharing options...
Mr. Moparman Posted December 15, 2011 Share Posted December 15, 2011 This is coming along nicely! Quote Link to comment Share on other sites More sharing options...
62rebel Posted December 15, 2011 Share Posted December 15, 2011 if you can get access to one, LeRoi "Tex" Smith has an excellent book on '50's era hot rods; i can't recall how many clear chassis shots there were, but lots of good reference for builders in scale and 1:1. if you're not a member of HAMB, i recommend joining there to get to some really good "like it really was" information... beware the langauge and temperament, however. i'm happy to be of any help whatsoever! BTW... i built one '29 A with a strip styrene chassis and little idea of what the heck i was doing..... in my '30's. had a spare body i wanted to use up.... Quote Link to comment Share on other sites More sharing options...
qmhd Posted December 18, 2011 Author Share Posted December 18, 2011 (edited) Hi guys, I could'nt find much time to work on the Deuce during this week, but here nevertheless small a update As said previously I wanted to keep the transverse rear spring so I prepared a new mockup based on the kind comments from "62rebel" I hope that this new configuration will seem more realistic like this (note that I've replace the FORD 40 Pickup axle by another one coming from a Chevy) I also added a small support for the batery - that gives a little more details and I like that Edited December 18, 2011 by qmhd Quote Link to comment Share on other sites More sharing options...
Speedster Posted December 18, 2011 Share Posted December 18, 2011 Looking GREAT! Quote Link to comment Share on other sites More sharing options...
qmhd Posted December 22, 2011 Author Share Posted December 22, 2011 Very small update here Most of the work done was on the frame and rails (filling gaps, sanding) I removed the chrome of the ibeam (later I'll spray it with Alclad) and drilled small holes - they were alrdeay marked on the plastic so why hesitate? I also created small shock mounts that's it for today. Quote Link to comment Share on other sites More sharing options...
'08SEAL Posted December 22, 2011 Share Posted December 22, 2011 NICE! Quote Link to comment Share on other sites More sharing options...
deathskull59 Posted December 22, 2011 Share Posted December 22, 2011 cool chop top im thinking of doing a 32 ford 5 window. exstened cab p/u truck with that body and a chop top. Quote Link to comment Share on other sites More sharing options...
deathskull59 Posted December 22, 2011 Share Posted December 22, 2011 i just got done chopping my very 1st 5 window chop on my 32 ford 5 window kit. and it was a very good succsessfull chop top quick and easy that was. Quote Link to comment Share on other sites More sharing options...
Dominik Posted December 22, 2011 Share Posted December 22, 2011 This topchop looks real! Perfect done Denis! I will follow your steps - looks to get a coool rod. Quote Link to comment Share on other sites More sharing options...
qmhd Posted December 26, 2011 Author Share Posted December 26, 2011 small update after a nice Xmass (hope it was nice for you too) I've chosen a pearl blue for the Deuce. After 3 shots I think it's not too light and deep enough to highlight the curves of the body. It will be sanded before clearcoat My will was to create a nice contrast with the blue by using a light grey I will use it outside on the firewall and the rims and inside for the dashboard I finally reworked on the tunel and than created the back of the cockpit where I placed the tank which I recycled from the 40 pickup. I had to relocate the battery but it was not a big problem hope you like the way it goes until now Quote Link to comment Share on other sites More sharing options...
carchub Posted January 1, 2012 Share Posted January 1, 2012 This is awesome! I just got the revell model yesterday and was thinking of chopping as well. Thing is, I've never chopped anything, that's why I found your thread =D Can I ask you for some tips? I did not realize that there would be more than just cutting the posts D: Anything helps, and nice work on your model! Quote Link to comment Share on other sites More sharing options...
Gluhead Posted January 2, 2012 Share Posted January 2, 2012 (edited) Nice lookin' hot rod. If you haven't been there yet, I'd like to recommend a visit (uh, it'll likely become several thousand visits, actually) to the H.A.M.B. http://www.jalopyjou...forum/ Search "Bass Coupe" for a quick start. He tends to include a lot of detail in his builds, and great pics. Outstanding reference material for the type of build you've sunk your teeth into here. Edited January 2, 2012 by Gluhead Quote Link to comment Share on other sites More sharing options...
qmhd Posted January 2, 2012 Author Share Posted January 2, 2012 This is awesome! I just got the revell model yesterday and was thinking of chopping as well. Thing is, I've never chopped anything, that's why I found your thread =D Can I ask you for some tips? I did not realize that there would be more than just cutting the posts D: Anything helps, and nice work on your model! This is only my second topchop and i'm not a pro you know but if I can help so please be my guest Nice lookin' hot rod. If you haven't been there yet, I'd like to recommend a visit (uh, it'll likely become several thousand visits, actually) to the H.A.M.B. http://www.jalopyjou...forum/ Search "Bass Coupe" for a quick start. He tends to include a lot of detail in his builds, and great pics. Outstanding reference material for the type of build you've sunk your teeth into here. thanks for the tips I'll take a closer look there! Quote Link to comment Share on other sites More sharing options...
crazyjim Posted January 2, 2012 Share Posted January 2, 2012 Looks like it's coming along just fine. Quote Link to comment Share on other sites More sharing options...
mopar68 Posted January 3, 2012 Share Posted January 3, 2012 Great build mate, this is looking killer Wheels with white walls were ordered a long time ago from www.thepartsbox.com (by the way, is this website still running?) Michele is having some minor health issues ATM, so the webshop is closed until further notice. Rumour has it they are moving to a bigger space, so as soon as they're done unpacking (and Michele's feeling better), the webshop will reopen with lots of cool new stuff. Quote Link to comment Share on other sites More sharing options...
qmhd Posted January 3, 2012 Author Share Posted January 3, 2012 Michele is having some minor health issues ATM, so the webshop is closed until further notice. Rumour has it they are moving to a bigger space, so as soon as they're done unpacking (and Michele's feeling better), the webshop will reopen with lots of cool new stuff. Thanks for the comments and the information Hope he will be healthier soon Quote Link to comment Share on other sites More sharing options...
carchub Posted January 6, 2012 Share Posted January 6, 2012 I guess I can figure out what height I want...what did you use to reconnect the roof? Quote Link to comment Share on other sites More sharing options...
qmhd Posted January 8, 2012 Author Share Posted January 8, 2012 Small saturday evening update here. Things are going on, but very slowly, sorry I'm nearly done with the front axle. I've worked on the details and hope everything is ok The biggest part of my recent work was done on the small block. I did some wiring here and it was not the easiest part Here again I hope I haven't done too much mistakes. by the way, I have a small question: I wanted to work with a small oil filter (see last picture) located on the firewall but is it correct with the kind of engine I chose? And if corect, where do I need to connect it on the engine? Quote Link to comment Share on other sites More sharing options...
qmhd Posted January 9, 2012 Author Share Posted January 9, 2012 let's go for my Monday evening update (yes, here in Belgium it's 9.5 PM) front axle is glued in place all the rest is just a mockup (not glued yet) to see ho the body fits on the frame I need to finish the rear axle and connect the exhaust system (not dry yet) any comments are welcome Quote Link to comment Share on other sites More sharing options...
qmhd Posted January 11, 2012 Author Share Posted January 11, 2012 the end is not so far I still need to correct the chrome part of the windshield and finetune the connection of the exhaust system This will be done for the next update Quote Link to comment Share on other sites More sharing options...
scale trucker Posted January 11, 2012 Share Posted January 11, 2012 very cool hotrod but the chevy just makes it ordanary.. Quote Link to comment Share on other sites More sharing options...
qmhd Posted January 13, 2012 Author Share Posted January 13, 2012 (edited) very cool hotrod but the chevy just makes it ordanary.. ordinary? I thought that putting him in flat head was too basic... Edited January 14, 2012 by qmhd Quote Link to comment Share on other sites More sharing options...
Rob McKee Posted January 13, 2012 Share Posted January 13, 2012 Really nice. I just love the detail on the engine. Quote Link to comment Share on other sites More sharing options...
qmhd Posted February 26, 2012 Author Share Posted February 26, 2012 (edited) today I fond the time to finish the exhaust system and the front lights I think I'm done with this little deuce... (sorry for the pics, they are too "red", just don't know what happened) Edited February 26, 2012 by qmhd Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.