bryan_m Posted August 27, 2012 Share Posted August 27, 2012 I love that you did with that trunk line, thats is VERY cool! and the hood is lookin great too........keep up the nice work! cheers bryan Quote Link to comment Share on other sites More sharing options...
JasonFL Posted August 27, 2012 Author Share Posted August 27, 2012 Awsume work so far... Thanks Carl. Love the exhaust, and I vote no on a plate. Thanks Randall. That's one vote for no plate. Quote Link to comment Share on other sites More sharing options...
JasonFL Posted August 27, 2012 Author Share Posted August 27, 2012 (edited) I love that you did with that trunk line, thats is VERY cool! and the hood is lookin great too........keep up the nice work! cheers bryan Thanks Bryan. Appreciate it Edited August 27, 2012 by JasonFL Quote Link to comment Share on other sites More sharing options...
JasonFL Posted August 27, 2012 Author Share Posted August 27, 2012 l see a custom to this extent as a trailer queen, which means you don't need plates. But if you DO wanna drive it you could use magnets & stick it anywhere on the back~ Haha...no such thing bart, if it were up to me I would drive everything but thanks for the compliment. Good point about the magnets, I could just throw it in the rear window if need be. That's 2 for no plate Quote Link to comment Share on other sites More sharing options...
H.A.K Posted August 27, 2012 Share Posted August 27, 2012 Dude this is hot lookin. I'm lovin this one. Quote Link to comment Share on other sites More sharing options...
BKcustoms Posted August 27, 2012 Share Posted August 27, 2012 Great job on the bumpers! I can't wait to see more progress. Quote Link to comment Share on other sites More sharing options...
Skydime Posted August 27, 2012 Share Posted August 27, 2012 I say, if it's a driver, recess the plate somewhere else. It it's meant to be a trailer queen, either ditch the plate or stick it in the back window. Quote Link to comment Share on other sites More sharing options...
Foxer Posted August 27, 2012 Share Posted August 27, 2012 (edited) I like everything you've done so far .. nice bodywork! The trunk line and hood change are subtle but oh so good! The flames will be spectacular! Do show by step how you create them. The exhaust is a great idea ... I think it could spread a bit .. just enough for that license plate. This SHOULD be driving on the street!! Edited August 27, 2012 by Foxer Quote Link to comment Share on other sites More sharing options...
Trans Am Erik Posted August 27, 2012 Share Posted August 27, 2012 I am loving this one, Good redesign of the hood and trunk. I also like the door lines by the A pilar. Good luck on that flame job, VERY difficult tape work! Love that exhaust. Check out my Merc too. Quote Link to comment Share on other sites More sharing options...
Greg Pugh Posted August 27, 2012 Share Posted August 27, 2012 This is awesome! I love seeing a fresh rendition on this kit! Keep up the good work! Quote Link to comment Share on other sites More sharing options...
Ramfins59 Posted August 27, 2012 Share Posted August 27, 2012 You could recess a license plate housing into the trunk... Quote Link to comment Share on other sites More sharing options...
Gluhead Posted August 27, 2012 Share Posted August 27, 2012 Looks great so far. Personally, I think the rear of the car will appear more balanced with the bumper halves being shorter (also happening to give you room for a plate). I'd definitely try to keep the trunk clear of clutter, so I'd avoid recessing the plate there. You're going to have a lot going on, visually, with those flames, so I think the less is more approach will pay off large on this one. Quote Link to comment Share on other sites More sharing options...
JasonFL Posted August 28, 2012 Author Share Posted August 28, 2012 (edited) I say, if it's a driver, recess the plate somewhere else. It it's meant to be a trailer queen, either ditch the plate or stick it in the back window. Thanks Ken. It will be a driver so I'm still not sure what to do. Maybe throw it in the back window Edited August 28, 2012 by JasonFL Quote Link to comment Share on other sites More sharing options...
JasonFL Posted August 28, 2012 Author Share Posted August 28, 2012 Dude this is hot lookin. I'm lovin this one. Thanks Samuel. Great job on the bumpers! I can't wait to see more progress. Thanks Billy. Quote Link to comment Share on other sites More sharing options...
JasonFL Posted August 28, 2012 Author Share Posted August 28, 2012 I like everything you've done so far .. nice bodywork! The trunk line and hood change are subtle but oh so good! The flames will be spectacular! Do show by step how you create them. The exhaust is a great idea ... I think it could spread a bit .. just enough for that license plate. This SHOULD be driving on the street!! Thanks a lot Mike. I'll be sure to show steps, I've never masked flames that small. Should be fun...haha. It will be a driver, still not sure about the plate, maybe back window. Quote Link to comment Share on other sites More sharing options...
JasonFL Posted August 28, 2012 Author Share Posted August 28, 2012 I am loving this one, Good redesign of the hood and trunk. I also like the door lines by the A pilar. Good luck on that flame job, VERY difficult tape work! Love that exhaust. Check out my Merc too. Thanks Erik. Tape work should be lots o fun...haha. I'll look for your merc This is awesome! I love seeing a fresh rendition on this kit! Keep up the good work! Thanks Greg. Quote Link to comment Share on other sites More sharing options...
JasonFL Posted August 28, 2012 Author Share Posted August 28, 2012 You could recess a license plate housing into the trunk... I thought about it but I didn't want to mess the flow of the trunk. Still not sure yet Looks great so far. Personally, I think the rear of the car will appear more balanced with the bumper halves being shorter (also happening to give you room for a plate). I'd definitely try to keep the trunk clear of clutter, so I'd avoid recessing the plate there. You're going to have a lot going on, visually, with those flames, so I think the less is more approach will pay off large on this one. Thanks Chris. I may widen them out a bit, not sure. Thats what I was thinking, I didn't want to much on the trunk. Quote Link to comment Share on other sites More sharing options...
crazyjim Posted August 28, 2012 Share Posted August 28, 2012 I believe the rear license plate needs to be lit. Putting it in the rear window would not be legal. How about one of flip plates? You start the vehicle and the plate folds down? Quote Link to comment Share on other sites More sharing options...
Skydime Posted August 28, 2012 Share Posted August 28, 2012 (edited) I believe the rear license plate needs to be lit. Putting it in the rear window would not be legal. Clearly, you have never been to Kentucky. (JK) There are a lot of us that have trucks who just stick the license plate inside the back window so, we can put it down in our cleaning totes at shows. It keeps us from having to put license plate frames on the roll pan or tailgate. There is no "rearmost" panel law in Kentucky for plates. You are right about the flip down plate though. They are pretty cool. Also, I knew a guy who had a trailer hitch receiver under the roll pan with a detachable bracket for his license plate so he could take it off easily at shows. Edited August 28, 2012 by Skydime Quote Link to comment Share on other sites More sharing options...
JasonFL Posted August 28, 2012 Author Share Posted August 28, 2012 I believe the rear license plate needs to be lit. Putting it in the rear window would not be legal. How about one of flip plates? You start the vehicle and the plate folds down? That is very true Jim but I think with hot roding and customization there are a lot of laws being broken...hahaha. The flip plate and the pop up plates mini truckers use on the bed of their trucks are very cool and clean, but I think that's a little out of my build expertise. I was think of frenching it but I'm even a little worried to attempt that. Quote Link to comment Share on other sites More sharing options...
JasonFL Posted August 28, 2012 Author Share Posted August 28, 2012 (edited) Did some work on the front suspension. I heated the lower control arms with some hot water and carefully bent them up. Had to remove some of the backing plate on the spindle to really get it up there. I ended up having to remove more so I just removed the whole thing But as you can see with the lower control arms being so high I'm getting a lot of camber. Doesn't show much with the wheel, that was just kinda sitting on there. Edited August 28, 2012 by JasonFL Quote Link to comment Share on other sites More sharing options...
JasonFL Posted August 28, 2012 Author Share Posted August 28, 2012 With all the camber I was having clearance issues with the fender so I made a relief cut on the backside of the spindles, and carefully pulled them forward then filled it. I made some smaller backing plates out of the numbers off an old parts tree and then smoothed it all out. Quote Link to comment Share on other sites More sharing options...
Skydime Posted August 29, 2012 Share Posted August 29, 2012 I like this method of lowering the front. I did something similar to mine. This thing is moving right along. Quote Link to comment Share on other sites More sharing options...
JasonFL Posted August 31, 2012 Author Share Posted August 31, 2012 I like this method of lowering the front. I did something similar to mine. This thing is moving right along. Thanks Ken. This was the first time I've done the front like this. I'm also doing the rear notches for the first time, I'll post photos soon. So far everything is good. How did you go about doing your front? Quote Link to comment Share on other sites More sharing options...
Skydime Posted August 31, 2012 Share Posted August 31, 2012 (edited) I actually cut the piece out that you replaced, omitted the coils (mine's just a shelf model), and clamped it together with clothes pins while the glue dried. The lake pipes barely clear a piece of paper in the front. Now I have true Ford negative camber. In the back, I carefully prenotched a slight bit out of the frame and then used a similar pinch and glue method to simulate dearched leaf springs. Fair warning, these frames aren't much so, if you aren't 100 percent comfortable, don't even try it on the frame you are gonna use. A spare would be handy for practice. If I as going to show mine off, I would have found a way to add some airbags under it. Axle to frame would be one heck of a bad ride in real life. Edited August 31, 2012 by Skydime Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.