bryan_m Posted November 16, 2012 Share Posted November 16, 2012 very nice work geoff! this thing is turning out really nice. great work on the wood too....... cheers bryan Quote Link to comment Share on other sites More sharing options...
charlie8575 Posted November 16, 2012 Share Posted November 16, 2012 Very nice work, and good repair job on that fender. This is going to be an absolute beauty when finished. Charlie Larkin Quote Link to comment Share on other sites More sharing options...
John Goschke Posted November 16, 2012 Share Posted November 16, 2012 Love this build! Makes me want to drag out the Aurora 1/16 Mercer Raceabout kit that's in my stash! Quote Link to comment Share on other sites More sharing options...
Harry P. Posted November 16, 2012 Share Posted November 16, 2012 Because they are actually molded as part as the body, they are not seperate parts .... it would have been a lot easier if they were ! I understand that, but wouldn't it have been much easier to do the masking and paint the "rubber" part before the fender units, chassis, seats, etc. had all been glued together? Too late now, but let it be a lesson for next time! Quote Link to comment Share on other sites More sharing options...
GeeBee Posted November 16, 2012 Author Share Posted November 16, 2012 I understand that, but wouldn't it have been much easier to do the masking and paint the "rubber" part before the fender units, chassis, seats, etc. had all been glued together? I don't think it would have been any easier, as the fenders are again parts of the body, either way, something would have had to be masked off .... Did a little more work on it today, finished off one of the running boards, just a little BMF to do around to rubber floor and the other running board, I'll reckon I'll get this finished in the next couple of weeks, just in time for my stay in hospital ..... Quote Link to comment Share on other sites More sharing options...
GTMust Posted November 16, 2012 Share Posted November 16, 2012 Whatever the reason for your stay in the hospital, I hope you have a speedy recovery and all goes well. Tony Quote Link to comment Share on other sites More sharing options...
Harry P. Posted November 17, 2012 Share Posted November 17, 2012 How did you do the silver trim around the running board mats? Masked and airbrushed? Or is that foil? You got a nice crisp line, it looks good. Quote Link to comment Share on other sites More sharing options...
GeeBee Posted November 17, 2012 Author Share Posted November 17, 2012 How did you do the silver trim around the running board mats? Masked and airbrushed? Or is that foil? You got a nice crisp line, it looks good. It's all done with BMF Harry .... Quote Link to comment Share on other sites More sharing options...
bryan_m Posted November 17, 2012 Share Posted November 17, 2012 very nice work! looks really clean..... bryan Quote Link to comment Share on other sites More sharing options...
crazyrichard Posted November 18, 2012 Share Posted November 18, 2012 awsome painting !! the whole build just is so great to watch ! good luck in the hospital ! Quote Link to comment Share on other sites More sharing options...
charlie8575 Posted November 19, 2012 Share Posted November 19, 2012 Looking good. Here's to a speedy and full recovery. Charlie Larkin Quote Link to comment Share on other sites More sharing options...
GeeBee Posted November 19, 2012 Author Share Posted November 19, 2012 (edited) Thanks for all the good wishes for my up coming hospital trip, the last time I was actually admitted into hospital I was taken ill in the U.S .... Anyway, I've got the floor, running boards and all the BMF finished, so I can crack on now and get the rest of the build finished .... After airbrushing the floor panel satin black, to me it looked a little too smooth, as it is supposed to replicate rubber, so I brushed on some of the Revell enamel thinned with lacquer thinners and tried to stipple it a little with the brush giving it a little more texture. Edited November 19, 2012 by GeeBee Quote Link to comment Share on other sites More sharing options...
charlie8575 Posted November 20, 2012 Share Posted November 20, 2012 That looks great, Geoff. This will be a lovely addition to your shelf when it's finished up. Charlie Larkin Quote Link to comment Share on other sites More sharing options...
GeeBee Posted November 20, 2012 Author Share Posted November 20, 2012 Got a little more done today, got the steering column fixed into place, this had previously been painted using Alclad polished brass, but the bottom piece that joins onto the floor needed to be done in chrome, this turned out a lot easier than I had anticipated, using chrome BMF, it was fixed into place using 5 minute epoxy, what you can't see in the photo is that bottom of the column needed to line up with the steering arm, again this lined up a lot better than I thought it would, with the column fitted the dash could go on, again fixed on using 5 minute epoxy and a few clamps to hold it in place until the glue dries, I also got the radiator masked up to airbrush the semi gloss black for the grill. Quote Link to comment Share on other sites More sharing options...
GeeBee Posted November 20, 2012 Author Share Posted November 20, 2012 Anyway I did a little more to this one, I will leave the parts to dry off overnight, the black on the front grille turned out o.k ..... not a lot more to get this one finished now, certainly looking more like a car now ! Quote Link to comment Share on other sites More sharing options...
GeeBee Posted November 21, 2012 Author Share Posted November 21, 2012 Got a bit more done tonight, the seats are in, the boxes on the running boards are on, the pedals are on, and I was going to put the headlamps on, but then I noticed that while the body of the lamps needed to be done in the brass, the reflectors inside needed to be done in chrome, so some BMF was cut into a circle, put on and trimmed to size, you can see the difference in the photo as the one is still not done ... Quote Link to comment Share on other sites More sharing options...
sjordan2 Posted November 21, 2012 Share Posted November 21, 2012 (edited) Awesome, and so accurate. My question is, did you mean to turn the headlights and radiator into the pewter look that I see, or are you still working on a brass finish? And not to be a pest, but don't the seat shells need red stripes? Edited November 21, 2012 by sjordan2 Quote Link to comment Share on other sites More sharing options...
GeeBee Posted November 21, 2012 Author Share Posted November 21, 2012 My question is, did you mean to turn the headlights and radiator into the pewter look that I see, or are you still working on a brass finish? Believe me, they are brass, and look so much better in the flesh, but just don't come over as such in the photo's .... Quote Link to comment Share on other sites More sharing options...
southpier Posted August 4, 2013 Share Posted August 4, 2013 how did this end up? Quote Link to comment Share on other sites More sharing options...
Bennyg Posted August 4, 2013 Share Posted August 4, 2013 Very nice. Awesome paint work. Great save on the chassis. Ben Quote Link to comment Share on other sites More sharing options...
W-409 Posted August 4, 2013 Share Posted August 4, 2013 how did this end up? It ended up really nicely. Here is the Under Glass post. I'm still amazed by your painted on pinstripes. They are so clean and so straight in all ways. Nice work. Quote Link to comment Share on other sites More sharing options...
southpier Posted August 4, 2013 Share Posted August 4, 2013 thanks for the link to the final result Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.