Mr. Inginear Posted April 20, 2013 Posted April 20, 2013 I bought a Paasche VL today after doing a little research on some airbrushes. I'm excited about learning how to use it but I'm looking for some advice on how to get started. I know that the more I practice with it the better the results will be, but I'm not sure what techniques I'm suppose to be practicing. Are there any websites, books, or videos that you recomend that show tips for beginners? The other question I have is about hooking it up to the compressor. I have a pancake air compressor that I use to air up tires and things around the house and was planning to use that for the air brush. I know that I will probably need an additional air pressure regulator other than the one that is on the tank. Is there anything else that I need to connect the to the line feeding the air brush such as oil filters or water seperators?
MAGNUM4342 Posted April 20, 2013 Posted April 20, 2013 Get a 40% off coupon for Hobby Lobby online. They have a good beginner's video. All you should need for the air compressor is a water trap and pressure regulator.
Mr. Inginear Posted April 21, 2013 Author Posted April 21, 2013 Thanks for the all the information. Next time at Hobby Lobby I will try to find the DVD and I will start looking at the videos listed so I can get started.
MAGNUM4342 Posted April 21, 2013 Posted April 21, 2013 The one at HL is a decent vid. It's on the rack by the Createx paints. As Derick has pointed out you can't go wrong with some Doctor Cranky, and you might want to look up member Donn Yost's videos here: http://oldmansmodels.com/
Eric N. Posted April 21, 2013 Posted April 21, 2013 I have a VL, The cool thing about it is you can use the little wheel in front of the trigger and use it like a single action. Just turn it and you will see the trigger will move back-for paint flow,then just press down. When you get more comfy w /it you can use it in double action- I hope this makes sense?-I'm not the best teacher, but anyway it's a verygood a/b, I think you will like it. Just go thin down some paint and play with it! You'll see. Eric
Monty Posted April 21, 2013 Posted April 21, 2013 Derick & Kevin, thanks for posting up your links and references. I'm sure they're going to help a lot of beginning airbrushers get off to a better start.
Dave Ambrose Posted April 21, 2013 Posted April 21, 2013 Yes. Get a water trap for sure. Harbor freight is a good source. The Paasche hose will take a standard quick disconnect, which is what I use. I think it's 1/4" pipe thread. It might even thread on to the compressor as-is. I would also get a large pad of newsprint and some cheap ink to practice with. That will keep clean-up easy and you can really get a feel for the pattern each tip lays down.
allparish12 Posted April 22, 2013 Posted April 22, 2013 i guess this is as good of a place for posting this, but i recently fired up my airbrush that i've had for maybe 5 years... talk about a kid in the candy store...i didnt want to put it down...lol sorry for the temp thread jack...but i would check Harbor Freight early and often...they had a sale on airbrush compressors and i got one for like 60 bucks...nice lil machine too...relatively quiet and works like a champ...
MAGNUM4342 Posted April 22, 2013 Posted April 22, 2013 i guess this is as good of a place for posting this, but i recently fired up my airbrush that i've had for maybe 5 years... talk about a kid in the candy store...i didnt want to put it down...lol sorry for the temp thread jack...but i would check Harbor Freight early and often...they had a sale on airbrush compressors and i got one for like 60 bucks...nice lil machine too...relatively quiet and works like a champ... Why not think better and think ahead? A regular pancake compressor is cheaper than an AB compressor, and does so much more!
Vampira Posted April 23, 2013 Posted April 23, 2013 I bought a Paasche VL today after doing a little research on some airbrushes. I'm excited about learning how to use it but I'm looking for some advice on how to get started. I know that the more I practice with it the better the results will be, but I'm not sure what techniques I'm suppose to be practicing. Are there any websites, books, or videos that you recomend that show tips for beginners? The other question I have is about hooking it up to the compressor. I have a pancake air compressor that I use to air up tires and things around the house and was planning to use that for the air brush. I know that I will probably need an additional air pressure regulator other than the one that is on the tank. Is there anything else that I need to connect the to the line feeding the air brush such as oil filters or water seperators? You can use a spare tire from a car. no compressor needed. kinda old school....
CadillacPat Posted April 23, 2013 Posted April 23, 2013 (edited) that is true and has a better control and even air flow because of the tank.. but there is a cost.. witch is noise.. there a lot louder.. I run a 50 foot hose to get the compressor at the other end of the house... I just mounted my other 2 regulators and moisture trap with a quick disconnect each end set up on the frame work of my spray booth cabinet. on the other side of the booth I have my hangers for my airbrushes.. I use good fabric covered hoses... ( the 50 hose is a 1/4 inch. diameter.) Very good information and well said!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Not every AirBrusher needs a large loud compressor. I purchased my brand new $400 Badger 180-22 Compressor off Ebay for $99, with a Regulator and Water Trap. Many great portable Compressors with and without Tanks can be had for under $125. CadillacPat Edited April 29, 2013 by CadillacPat
Blackwolf Posted April 28, 2013 Posted April 28, 2013 Hi MCM why not try this airbrush forum here is their web site www.theairbrushforum.com there are alot of great people on there to give you a helping hand if you get stuck or what ever and somethimes they have a airbrush class to also help you out.
allparish12 Posted April 29, 2013 Posted April 29, 2013 Why not think better and think ahead? A regular pancake compressor is cheaper than an AB compressor, and does so much more! probably...but imo...$60 was a great deal... i will use this soley for my models so, it was worth it to me. but thank you for your input though...
DPNM Posted April 30, 2013 Posted April 30, 2013 If your airbrush was a new kit it should have had a booklet in it showing how to practice with it. If you got the booklet and haven't done so yet, please read it. Another way to practice is to get one bottle of fabric paint like Createx. I would suggest black. Scrounge up an old T-shirt or two and practice on them. Stick a piece of cardboard inside the shirt and spray away. You have to be sure you clean the 'brush well if you plan to later spray solvent based materials but it is also a good way to learn how to take it apart and put it back together.
scalenut Posted May 1, 2013 Posted May 1, 2013 practice on hard surfaces not something that is absorbent ,, this will really come into play when your start thinning paints for models
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now