Dodge Charger and Chevorlet Camaro

[wheelingmountaineer]

Hi All,

I just recently started getting into the hobby and I would like to share some pictures of a Dodge Charger and Chevorlet Camaro I made.

Thank you

[martinfan5]

Did you mean Challenger ?

[wheelingmountaineer]

Yes

[Harry P.]

And did you mean Chevrolet?

[cobraman]

Not bad Chris. If I may suggest spend some time on getting the decals lined up and use a setting solution if you did not. Now go build some more !

[wheelingmountaineer]

Thanks. Wouldd you have any suggestions as far as gluing the parts together. I paint them then glue them together but the paint smears at times. I also tried to glue everything together but it was really hard to paint especially getting into tight spots. I glued the interior together (seats, steering wheel, etc) and it was impossible to paint spots behind the steering wheel, on the side of the seats, etc.

[wheelingmountaineer]

And did you mean Chevrolet?

yes

[lazlow]

your off to a great start. Diggen that Challenger.

Laz

[JasonC]

They look good for just starting!

[Ford guy]

You're doing good to start, better than me when I first started modeling! LOL! Try painting the parts separately, then when dry, scrape the paint off where you'll put the glue, just a little. Follow the instructions and google pictures of 1:1 cars, it helps to see the real thing.

Keep up the good work.

Roy

[MikeyB08]

Also, try to paint every part before you even begin assembly. Stay within your instructions until you've gotten a few models under your belt. Example, if Step 1 is putting the motor together, try not to move forward untill you have all of the parts painted and glued together. Proceed to Step 2.

Also, try using a toothpick with your glue. Allow me to explain- With your super glue in one hand and a toothpick in the other, gently put a small amount of superglue on the tip of the toothpick. This allows you to control your glue better as well as getting it in tight spaces. Superglue can go a long way when used respectively.

Another thing to remember is to test fit each and every single piece before you commit to gluing. Some pieces may need to be trimmed, or paint may have built up in the corresponding hole to the part you are working with.

The biggest thing to keep in mind, is to take your time. If you feel that you are getting frustrated, or angry, walk away. Go get something to drink, grab a bite to eat or something. Just as long as you walk away. It's a hobby that's meant to be enjoyed and have fun. Don't let it become a chore.

Overall, you are off to a great start. My first model was painted with a brush and had brush marks and bristle's on everything.

[PappyD340]

Twice the NICE, great job, just apply the advice given in the former posts and keep building man, the more you build the better you will get, there is always someone on here who is willing to help you out , you just gotta ask!!!

[Johnny1973]

Nice job and welcome to the hobby.

[dantewallace]

Wheeling, Your lighting used in your pics is pretty dim. May I suggest taking photos of your builds outdoors if you have no brighter lights? It will really make your colors and details stand out more. I cant really tell what colors you were going for. Is the challenger red or orange, and I assume the Camaro is yellow?

[wheelingmountaineer]

Yes, the challenger is Orange and the Camaro is red. I am going to be working on a monster truck, I will take pictures outside. Thank for everyone for the advice today. I feel like it was very helpful.

[Jantrix]

Welcome to the hobby. Those models are worlds better than my first in the hobby. So here are some things that will help you.

On each piece, scrape or sand off all mold lines, ejector pin marks (round dimples in the part) and sprue connection points with sanding sticks. You can find them in the nail care area of your local beauty supply shop. They will become the tool you just can't do without, in about five minutes. They come in several grits.

Spray paint everything you can. Krylon from Walmart will do you for everything black, silver, white, tan etc. If the engine block and heads are both going to be orange, feel free to glue them together first.

Let everything dry completely. There is nothing worse than fingerprints in fresh paint. A lack of patience was my biggest downfall when I was young.

White Elmers glue for all clear parts. Drys clear and is washable with water if you use too much.

Practice!!! None of use got where we are without messing up a lot of models.

[orangechallenger]

lol, quite good to start with a Chevy! my first one is a Monte Carlo SS! and your chevy is obviously better than mine