Darren B Posted October 16, 2017 Author Posted October 16, 2017 The front end is finished even with shocks and tie rod. After I lay out the interior I will add a steering box and the drag link.
Darren B Posted October 16, 2017 Author Posted October 16, 2017 The rear suspension is now glued and finished.....
Darren B Posted October 17, 2017 Author Posted October 17, 2017 I wanted to do a little different on the transmission tunnel guard than what Scott did. This is an old ear ring piece my wife was done with.
gotnitro? Posted October 17, 2017 Posted October 17, 2017 Are ya planning to remove the extra section of frame in front ahead of springs ? Killer work fabbing the springs and perchLove the idea for the tranny tunnel cover
Darren B Posted October 17, 2017 Author Posted October 17, 2017 (edited) gotnitro? Thank you on the tunnel cover, wanted something more stylish than just aluminum sheet, as far as the extra section on the frame, do you mean right in front of the front leaf spring? That section I have to come up with some kind of mounting system for the grill and radiator, not sure if Scott's had a raditor as from all the pics I could not see one but I want to add one. I may have to modify the frame to do so but so far thinking I can fit one in even if its a smaller one from a large pickup or something like that but will see. That is another huddle that I have not put much thought into but will have to soon deal with.... Edited October 17, 2017 by Darren B
Darren B Posted October 17, 2017 Author Posted October 17, 2017 A little awkward the tunnel meeting the sheild but I think once painted it will work....
gotnitro? Posted October 17, 2017 Posted October 17, 2017 Yep really like how your tunnel is working !that's the area that gave the most hurting brain cells trying to figure out how it should all work..ya made it look easy Yeah I was referring to the frame sections ahead of the spring, you've cleared my question using it for radiator, I thought the idea was having your front spring out front and the rad behind...tI'll I went back to the original photo.
Darren B Posted October 17, 2017 Author Posted October 17, 2017 Yep really like how your tunnel is working !that's the area that gave the most hurting brain cells trying to figure out how it should all work..ya made it look easy Yeah I was referring to the frame sections ahead of the spring, you've cleared my question using it for radiator, I thought the idea was having your front spring out front and the rad behind...tI'll I went back to the original photo.Scott's version from all the photos that I have show no radiator, now that you mention it behind the spring, right in front of engine would have been a good place for it. I'll figure something out thou. I want a radiator to make it more believable.
Darren B Posted October 17, 2017 Author Posted October 17, 2017 seats mocked up, a little close but still works.....
Darren B Posted October 18, 2017 Author Posted October 18, 2017 (edited) tunnel done! have to trim it but have to tie it in with the seat base, now its time for the engine............. Edited October 18, 2017 by Darren B
Darren B Posted October 23, 2017 Author Posted October 23, 2017 Extended the length and added a skull for the knob.....
slusher Posted October 24, 2017 Posted October 24, 2017 Looking great Darren! I really like what your doing...
Darren B Posted October 25, 2017 Author Posted October 25, 2017 Looking great Darren! I really like what your doing...Thank you Carl.
DRIPTROIT 71 Posted October 26, 2017 Posted October 26, 2017 Lots of nice fabrication going on here. Nice work!!
Darren B Posted October 29, 2017 Author Posted October 29, 2017 Lots of nice fabrication going on here. Nice work!!Thank you Brian.
Darren B Posted October 30, 2017 Author Posted October 30, 2017 Awesome work ! Love the skull shifter knob Thank you Jeff.
Darren B Posted October 30, 2017 Author Posted October 30, 2017 Now working on figuring out how to attach this thing............................
gotnitro? Posted October 30, 2017 Posted October 30, 2017 Is that a gear from a wind up watch for the radiator capNice
Darren B Posted October 30, 2017 Author Posted October 30, 2017 Is that a gear from a wind up watch for the radiator capNiceJeff, yes its two pieces from a watch, I like to add them when I can find a place for them. I normally would have made one on my lathe but a few years back had to sell it to get out of a financial situation. They look good being machined and come in handy as caps using a winder for a watch.
Darren B Posted October 30, 2017 Author Posted October 30, 2017 making the visor for the cab as well, came out pretty good I think so far....
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now