lanesteele240 Posted March 14, 2014 Author Posted March 14, 2014 (edited) Pipes and i added the rear roll bars Edited March 14, 2014 by lanesteele240
lanesteele240 Posted March 14, 2014 Author Posted March 14, 2014 I built a intake plenum. All i had was a few vauge pics to make it from.
lanesteele240 Posted March 15, 2014 Author Posted March 15, 2014 (edited) Next up is making the intake tubes This was a fail fail fail event I started with 5/32 aluminum tube and a tube bender. It did not go well Fail More fail Close but u can see it is mashed on the inside in person I then had an idea to temper the tube More fail as i tempered it toooooo much And finnally a win or two Edited March 15, 2014 by lanesteele240
Teddy J. Tannehill Posted March 15, 2014 Posted March 15, 2014 One of my pals was using tubing to make an exhaust system, he put a smaller diameter wire inside the tube when bending it this kept it from collapsing. I think he said he used copper for the wire inside the tube. I like you work what you have done looks really good.
lanesteele240 Posted March 16, 2014 Author Posted March 16, 2014 Thanks teddey. I will try it but there is a limit to how small the radious is on the bender. I saw some other dude on another forum use milliput. So i cut off a sharpy on both ends and extruded some after packing it in. Here is the result. After it cures i will sand file and prime it. If it looks good i will go with it
lanesteele240 Posted March 16, 2014 Author Posted March 16, 2014 Very Realistic Interior! Real Nice Work Gary... Thanks ira. And everybody else that has looked or commented
lanesteele240 Posted March 20, 2014 Author Posted March 20, 2014 (edited) I got around to finishing the intake tubes I had to repaint the interior. It turns out it is sliver instead of black. While i was at it i scratched a console and made the shifter more like it should be. To match my first build i have go get some racing white. I some how picked up bright white. That is going to be a small hold up since my lhs is a long trip. Well i have to finish the under carrage and assemble the chassis and figure out what im going to do about the side glasses. ? that is going to take some head scratching Edited March 20, 2014 by lanesteele240
Tompidom Posted March 20, 2014 Posted March 20, 2014 The interior is looking good! Keep up the good work.
lanesteele240 Posted March 22, 2014 Author Posted March 22, 2014 I have made a net for the inside. Up next i will do the window net
vwdave92 Posted March 23, 2014 Posted March 23, 2014 wow this looks amazing. The embossing powder on the seat blew me away. It looks like alcantera that is so popular now. Does it go down like flocking? How durable is it? I may have to try this...
lanesteele240 Posted March 23, 2014 Author Posted March 23, 2014 wow this looks amazing. The embossing powder on the seat blew me away. It looks like alcantera that is so popular now. Does it go down like flocking? How durable is it? I may have to try this... Thanks. The powered seat is just one of the many things that i have learned here on the forum. Kennyboy showed me how good it looked in one of his builds. I just followed his advice. I spraid down black paint real wet. Sprinkled on the powder and applied more where needed. I then spraied down a topcoat of black then a final coat of dull coat. None of them have even thought of falling off
Kennyboy Posted March 23, 2014 Posted March 23, 2014 Great job on the seat and the build in general so far Gary!
lanesteele240 Posted March 25, 2014 Author Posted March 25, 2014 Great job on the seat and the build in general so far Gary! Thanks kb I miss looked at where the net part of the window net was. So i remade both the inner and outer nets. I cut a section of seat belt decal off of set to mimic the stitching. A few trinkets for the engines Thanks for watching
lanesteele240 Posted March 27, 2014 Author Posted March 27, 2014 (edited) I made an a/c box and put the body on to get a look. The brakes are on too Going to fayettville tomorow to get some paint. My favorite part is comming soon. Decals. My least fav part is looming also. Figuring out the side windows. I have some ..015 acetate sheet. I hope i can heat it to bend it to the correct shape of the window Edited March 27, 2014 by lanesteele240
lanesteele240 Posted March 27, 2014 Author Posted March 27, 2014 Cockpit is done and rollers installed The paint is gassing off after decanning (the correct word instead of decanting) and the body will be painted tonight
Belugawrx Posted March 27, 2014 Posted March 27, 2014 That is some great detailing in the cockpit!!! Well done
lanesteele240 Posted March 28, 2014 Author Posted March 28, 2014 Paint applied It is so white that it is blue
lanesteele240 Posted March 30, 2014 Author Posted March 30, 2014 Did a small bit of polishing to the few flaws that came up in the paint and applied some of the decals. Still have to do the other door and a good bit of touch up to the decals
Mizozuman2 Posted March 30, 2014 Posted March 30, 2014 Did a small bit of polishing to the few flaws that came up in the paint and applied some of the decals. Still have to do the other door and a good bit of touch up to the decals This kit looks awesome!
lanesteele240 Posted March 31, 2014 Author Posted March 31, 2014 Thanks mezo, ira and ken. I hope to push this one on out in the next few days. Finally a few days away from work
lingham Posted April 2, 2014 Posted April 2, 2014 That decal work on the grill is seriously amazing. so much detail in such a small amount of space. 10/10
Toast Posted April 4, 2014 Posted April 4, 2014 What a cool car! There's so much happening in those decals alone. Add to it all the details you're adding and this should be a very fun piece to look at when you're done. Good work, I'm excited to see more.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now