Cabover Kid Posted August 15, 2014 Share Posted August 15, 2014 Hi guys, gotta 352 cab that I am not happy with. Time for a second take, I've never stripped a piece, what works best??? Quote Link to comment Share on other sites More sharing options...
Petetrucker07 Posted August 15, 2014 Share Posted August 15, 2014 Castrol super clean, purple power, easy off oven cleaner, brake fluid. Ive used purple power, it worked great, let it soak for a few days, scrubbed with an old toothbrush and a little purple power and warm water. Castrol super clean is harsh as is easy off, outside with rubber gloves, or youll remove the skin off your fingers. Quote Link to comment Share on other sites More sharing options...
Cabover Kid Posted August 15, 2014 Author Share Posted August 15, 2014 Castrol from the parts store? And sorry, what is purple power?? Quote Link to comment Share on other sites More sharing options...
1930fordpickup Posted August 15, 2014 Share Posted August 15, 2014 (edited) What you are looking for is a concentrated degreaser. I use the ZEP brand from Menards . it was made by Rubbermaid for a while but they changed brands . It is purple in color and comes in a blue one gallon jug. Just find a resealable container that you can leave the cab sit in so that it will covered in the degreaser. I just poor it in straight. As pointed out below USE GLOVES! This is a link to what I purchased last http://www.menards.com/main/housewares/cleaners/all-purpose/zep-commercial-ultrapurple-degreaser/p-1977297-c-7097.htm. Only 10.00 a gallon and it will last for years most of the time, just strain the big flakes of paint out and reuse . Edited August 15, 2014 by 1930fordpickup Quote Link to comment Share on other sites More sharing options...
Mike Kucaba Posted August 15, 2014 Share Posted August 15, 2014 some of these strippers (like Purple Power,Super clean,etc) work a little better when warm. NOT HOT! WARM. Quote Link to comment Share on other sites More sharing options...
tbill Posted August 15, 2014 Share Posted August 15, 2014 i use whatever houshold degreaser is on sale, or in front of me at the time, lol. most of it is the same stuff, and does the same job. if the paint isn't too old, it should come off quickly, once it starts to 'lift' hit it with an old tooth brush to help loosen more paint. if it's old paint, may take a few weeks to get off. Quote Link to comment Share on other sites More sharing options...
Aaronw Posted August 15, 2014 Share Posted August 15, 2014 Agree with all of the above. And take the advice about gloves seriously, most of these cleaners will remove the top layer of skin quickly and will cause irritation and with extended exposure can cause minor burns. I'd suggest a pair of dishwashing gloves, they are cheap and reusable. Quote Link to comment Share on other sites More sharing options...
1930fordpickup Posted August 15, 2014 Share Posted August 15, 2014 some of these strippers (like Purple Power,Super clean,etc) work a little better when warm. NOT HOT! WARM. I have noticed that the paint comes off faster in July and August , as I do not have Air . Quote Link to comment Share on other sites More sharing options...
Petetrucker07 Posted August 15, 2014 Share Posted August 15, 2014 Purple power, thats the actual name on the label, is a degreaser, and both castrol and purple power are from the auto parts. I put my tub on the patio so if for some reason a cat or just accidentally it spills or gets knocked over it does make a mess in the house or garage, and here in southern cali the temps are warm in the shade, around 80 or 90 Quote Link to comment Share on other sites More sharing options...
Cabover Kid Posted August 15, 2014 Author Share Posted August 15, 2014 Cool! Thanks for the info!! Let ya know how it goes;) Quote Link to comment Share on other sites More sharing options...
Mr mopar Posted August 16, 2014 Share Posted August 16, 2014 I only use easy off in the pump bottle ,it's more thicker .my 2 cents Quote Link to comment Share on other sites More sharing options...
Bennyg Posted August 16, 2014 Share Posted August 16, 2014 Good luck. I just killed my tamiya laferrari using non acetone nail polish remover. I've learnt my lesson. Looking forward to hearing how your cab goes so I don't make another mistake. Ben Quote Link to comment Share on other sites More sharing options...
highway Posted August 16, 2014 Share Posted August 16, 2014 Another option is Dawn Power Dissolver, actually used for cleaning pots and pans. I have not personally used it for paint stripping yet, but a friend of mine has and said it worked as well as the purple power. I have used it to strip chrome, and it does that very quickly. A plus to, it has not harsh odors or precautions needed. Quote Link to comment Share on other sites More sharing options...
clayton Posted August 16, 2014 Share Posted August 16, 2014 The stuff works better warm. I have let parts set all winter in the cleaner. but in Summer just a few days. Quote Link to comment Share on other sites More sharing options...
Cabover Kid Posted August 17, 2014 Author Share Posted August 17, 2014 Well I picked up a jug of Zep degreaser and started the soak sat. night around eleven...we'll see how it goes! Now for the root of my situation, I am still new, but I can't pass up a chance at some sort of stripe for this cab. The door/compartment lines and rivets are sort of in the way of successfully masking and painting without more leakage between colors than I can stand. Hence the bath! I read the other day that once the masking tape was applied to hit it with a shot of clear coat, then the color. Thought I would give that a try this time. Open to any more ideas from more experienced builders. Thanks!! Quote Link to comment Share on other sites More sharing options...
Petetrucker07 Posted August 17, 2014 Share Posted August 17, 2014 (edited) Ive read that some guys paint the base color, the color of the stripe. Use a good masking tape to resemble how you want the stripe to be, then clear it. Let it dry completely. Then spray the other color, unmask and clear again. They say the clear over the tape seals the edge. But be sure to let the 1st coat of clear dry completely, very important so it doesnt pull the edges up. Edited August 17, 2014 by Petetrucker07 Quote Link to comment Share on other sites More sharing options...
tbill Posted August 17, 2014 Share Posted August 17, 2014 yup, put your base color on [color you want the stripe], let it dry/cure fully, then tape your stripes and clear it, then let it dry a bit and do your final color. let that dry, then un tape it. although this is a car, that's how I did this, diamond dust silver, inca gold and flaming orange Quote Link to comment Share on other sites More sharing options...
Mackvision Posted August 17, 2014 Share Posted August 17, 2014 Good quality masking tape is also important to a multi color or stripe paintjob,i have always used Tamiya fine-line 6mm with really good results...................................Mark Quote Link to comment Share on other sites More sharing options...
Cabover Kid Posted August 19, 2014 Author Share Posted August 19, 2014 So after a little less than 48 hrs. The cab came pretty clean!! The Zep cleaned it right down to the primer. I left it soak last night to loosen the remaining paint, (a few corners and what not) but a tooth brush was all it took to finish! Worked well, thanks again for the help!! Let ya all know how the new stripes go, hopefully if the next week or so! Quote Link to comment Share on other sites More sharing options...
1930fordpickup Posted August 19, 2014 Share Posted August 19, 2014 After you pull it out for the last time , makes sure you rinse the truck very well and wash off with some good dish detergent . Quote Link to comment Share on other sites More sharing options...
txdieseldog Posted August 25, 2014 Share Posted August 25, 2014 Just to pipe in here..... I use Purple Power and get it very cheap at my local "Dollar General" in the gallon jug. I have had no problems with it here in TX and it has stripped some doozys for me. Quote Link to comment Share on other sites More sharing options...
1930fordpickup Posted August 25, 2014 Share Posted August 25, 2014 Good to know Barry , we now have another brand. Quote Link to comment Share on other sites More sharing options...
redneckrodder Posted September 7, 2014 Share Posted September 7, 2014 Castrol super clean, purple power, easy off oven cleaner, brake fluid. Ive used purple power, it worked great, let it soak for a few days, scrubbed with an old toothbrush and a little purple power and warm water. Castrol super clean is harsh as is easy off, outside with rubber gloves, or youll remove the skin off your fingers. castrol is some strong stuff dilute it using the guide on back of jug used it today cleaning some parts and used fast orange to clean my hands they smell weird now...i reccommend gloves or else your hands will feel soapy and even diluted will start tearin up your hands...i learned the hard way...lol Quote Link to comment Share on other sites More sharing options...
Bad Nickle Posted September 8, 2014 Share Posted September 8, 2014 (edited) Simple green works as well and is not near as hard on your hands. Been using it for years and just stripped a body painted with automotive paint-not dupli-color in about a week Edited September 8, 2014 by Bad Nickle Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.