hobbybobby Posted October 25, 2014 Author Posted October 25, 2014 And it goes on... Somehow, such builds vaporize me a lot of time in searching, choosing the right equipment and parts... As in the following example... This is a window shutter made from LEGO... Since I made the window first, the shutter was now too wide, I had to reduce it a bit... ... and the same with four pieces... ... primed flat black... ... and then dry brushed... ... and mounted on the window Frame... Stay tuned...
bobthehobbyguy Posted October 26, 2014 Posted October 26, 2014 Nice work. Great idea for the shutters.
hobbybobby Posted October 26, 2014 Author Posted October 26, 2014 Thank you very much! And it goes on... I'm looking everywhere for means and things that make it easier for me to make appropriate parts I need for my builds... These are the holder of earring plugs... ... and after I have these flattened in a vice... ... I make from these, new, not functioning, only indicated, hinges for the rear doors... Stay tuned...
hobbybobby Posted October 26, 2014 Author Posted October 26, 2014 And it goes on... First, I wanted to paint the interior, but then i sanded the primer in the interior... ... in order to redecorate it... These are the new wallpaper- parts, cut from decorative paper... ... slightly refined... ... and finally wallpapered... Hope, you like it so far, stay tuned...
microwheel Posted October 26, 2014 Posted October 26, 2014 I like how this build is going for you. It's looking good. Look forward to seeing more.
Dave Van Posted October 27, 2014 Posted October 27, 2014 LOVE the Lego parts!!! I use Lego lamp shades in my O scale trains. About 5 cents each vs $2-3 if you buy 'O scale' lamp shades!!!
hobbybobby Posted October 27, 2014 Author Posted October 27, 2014 Thank you very much for the kind words! And it goes on... Here is another detail, so that the chimney makes sense... ... and for the cold days... ... an old barrel and a few small things... ... complete and refined... ... with some iron Color... ... and installed in its place... Hope, you like it so far, stay tuned...
mrm Posted October 27, 2014 Posted October 27, 2014 I love it. There is nothing more I like, than seeing various things from around us that were not intended for models to find their way to a custom, fun build.
Mr mopar Posted October 28, 2014 Posted October 28, 2014 Very nice work I want to do this too ..................... Love it!
hobbybobby Posted October 29, 2014 Author Posted October 29, 2014 Thank you very much for the kind words! And it goes on... Initially, I thought the most difficult in this project, will be the roof.... ... simply bend a plate and stick it to the lodge... ... would be a possibility... ... but, well, what is about the structure? Hmm... It started with a "matching" PVC pipe... ... edited it outside and inside on the lathe... ... I cut it then in the length, slightly more than half of the diameter, about 2mm over the radius, and cut off a piece, about the same angle, on front and rear... ... inside, the two lines show, where the house will have its place... Outside, I first sketched with a scriber, a structure... Then I worked out the wells, first rough with my Dremel... ... and after that, refined all with different files and sandpaper... ... then I glued a central roof bar and drilled a hole for the chimney pipe... ... now it's ready and primed for painting... Hope, you like it so far, stay tuned...
Dave Van Posted October 30, 2014 Posted October 30, 2014 GREAT creativity for sure........thanks for sharing....
Ramfins59 Posted October 30, 2014 Posted October 30, 2014 This is looking so very cool so far. I love all the creativity.
hobbybobby Posted October 31, 2014 Author Posted October 31, 2014 Thank you all very much for the kind comments, I really do appreciate them! And it goes on... After the primer has dried, now comes the real challenge: the painting, which shows all the structure... Dry brush with various Colors... ... a little more refined... ... I have it also painted from the inside... ... this is a metal sleeve... ... shortened to the desired length... ... and planted at the final Destination... Hope, you like it so far, stay tuned...
hobbybobby Posted November 2, 2014 Author Posted November 2, 2014 And it goes on... The house and roof are now united, i installed some ornate roof supports, these come also from the Royal Rail kit...
hobbybobby Posted November 3, 2014 Author Posted November 3, 2014 Thank you very much for the kind words! And it goes on... And here is another example, i spent some time and a lot of work, that is at the end, not really noticed... I edit each spoke from the inner side with my scalpel knife, to let the whole appear a little slimmer and make them look at least somewhat like spokes... Stay tuned...
hobbybobby Posted November 6, 2014 Author Posted November 6, 2014 Thank you very much! And it goes on... For the round Windows, I had to try a little, until I could punch out the appropriate diameter... These, with the white protective film are made of Makrolon®, and these, with the blue are made of PET... ... i turned four aluminum rings, with a small escarpment... ... these are the parts required for a window... ... first, i primed the rings... ... and then painted... Stay tuned...
hobbybobby Posted November 6, 2014 Author Posted November 6, 2014 Finally, I mounted the windows at their destination: At the back... ... to the front... ... and a view from the inside... Hope, you like it, stay tuned.
hobbybobby Posted November 8, 2014 Author Posted November 8, 2014 And it goes on... Until recently, the fork from my donor kit, looked like this: The Li'l Gypsy Wagon- fork has openings: ... so I thought, I'd do that too... ... well, that was more difficult than I thought... ... to carve the recesses in the assembled state, was not a good idea... ... but, with a little patience and time... ... and, well, from planned, rounded openings, emerged very fast, some angulars... Well, after a while, I like now the fork, I hope you like it too!
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now