Zoom Zoom Posted July 24, 2006 Share Posted July 24, 2006 I've finally started a model that I've been contemplating for a number of years; a replica of my uncle's '62 Jeep PU. Having recently gotten a good photo of it, I am now able to build it as I can remember it. It was a work truck, and as such it wasn't babied. So the model will depict it in all it's glory and well-worn patina, which thankfully shows pretty well in the photograph. I started with a Liberty Classics Jeep panel truck diecast kit that I found at Big Lots. I purchased a resin All American Models PU transkit at Auto Motif; it was marked down $20 because it was missing fenders, which didn't bother me since they're pretty simple shapes to scratchbuild. I also had to find appropriate wheels/tires, the ones in the basic kit aren't much good for a work truck. I eventually found a set of five resin Jeep wheels/tires (one spare) from Hendrix. With the photo & lots of internet reference, I'm ready to start this and try a few weathering techniques that I don't get to do very often building my normal "shiny" subject matter. I also have one of those instant rust kits that I'm dying to try out as well. This is going to be fun Here's what I stared with: And here it is now in it's first primer coat after making the fenders, removing some hood trim and adding chrome trim to the cab: So far it's been a lot of fun; different subject matter and a completely different approach to finishing. It shouldn't take me long to pull it all together and get it done; but then again there are a lot of little details I need to scrounge up and scratchbuild. Quote Link to comment Share on other sites More sharing options...
Casey429 Posted July 24, 2006 Share Posted July 24, 2006 I've always like these old Jeep trucks. Glad to finally see one in scale. Even more so, one that has some meaning to it. Quote Link to comment Share on other sites More sharing options...
MonoPed Posted July 24, 2006 Share Posted July 24, 2006 That's something ya don't see often, in scale or 1:1....keep us posted! Quote Link to comment Share on other sites More sharing options...
BIGTRUCK Posted July 24, 2006 Share Posted July 24, 2006 Really a great subject , seen one that was like a wagoneer [if my mind is on track]made by Specast , I chose the '57 Dodge pickup instead , but upon getting it home it looked more like some odd 1/27 or 28th scale not the 1/25th it stated, so I never went back for Willys Quote Link to comment Share on other sites More sharing options...
Zoom Zoom Posted July 24, 2006 Author Share Posted July 24, 2006 Actually the base kit (panel wagon) may be a Spec Cast and not Liberty; it's been so long since I bothered to look at the box :roll: I'd say it's 1/25 scale, looks right to me, and those Dodge trucks did look underscale. Art Anderson would know for sure on this one, as he did the measuring and conversion work for the resin PU. Also, RMR is offering a similar resin kit now. Quote Link to comment Share on other sites More sharing options...
bluemoose Posted July 24, 2006 Share Posted July 24, 2006 Yes, I also like building cars that bring back family memories. Beautiful job scratch building the rear fenders. The stance and the wheel/tire combo look great. Quote Link to comment Share on other sites More sharing options...
Billy Kingsley Posted July 25, 2006 Share Posted July 25, 2006 Awesome, Bob! When my mom and dad met he had a wagon version, IIRC a 64, that I plan to replicate soon... Quote Link to comment Share on other sites More sharing options...
mrglubaum Posted July 26, 2006 Share Posted July 26, 2006 That's nice, Bob! Hey, is Auto Motif still around? I thought Milt closed it up a couple of years ago. I used to love going in that place! Quote Link to comment Share on other sites More sharing options...
Zoom Zoom Posted July 26, 2006 Author Share Posted July 26, 2006 That's nice, Bob! Hey, is Auto Motif still around? I thought Milt closed it up a couple of years ago. I used to love going in that place! Thanks! Auto Motif closed at the end of '04; the rest of the store stock is still being sold by Milt via Ebay. I've had this resin transkit for about 5 years IIRC. Quote Link to comment Share on other sites More sharing options...
Biscuitbuilder Posted July 26, 2006 Share Posted July 26, 2006 Actually the base kit (panel wagon) may be a Spec Cast and not Liberty; it's been so long since I bothered to look at the box :roll: I'd say it's 1/25 scale, looks right to me, and those Dodge trucks did look underscale. Art Anderson would know for sure on this one, as he did the measuring and conversion work for the resin PU. Also, RMR is offering a similar resin kit now. Bob, Let's try Liberty SpecCast--that's the brand that's on the 1 or 3 Jeep panel delivery kits I have. Biscuitbuilder Quote Link to comment Share on other sites More sharing options...
Biscuitbuilder Posted July 26, 2006 Share Posted July 26, 2006 Really a great subject , seen one that was like a wagoneer [if my mind is on track]made by Specast , I chose the '57 Dodge pickup instead , but upon getting it home it looked more like some odd 1/27 or 28th scale not the 1/25th it stated, so I never went back for Willys Too bad, 'cause the Jeep Panel is spot-on 1:25 scale! Biscuitbuilder Quote Link to comment Share on other sites More sharing options...
Biscuitbuilder Posted July 26, 2006 Share Posted July 26, 2006 Actually the base kit (panel wagon) may be a Spec Cast and not Liberty; it's been so long since I bothered to look at the box :roll: I'd say it's 1/25 scale, looks right to me, and those Dodge trucks did look underscale. Art Anderson would know for sure on this one, as he did the measuring and conversion work for the resin PU. Also, RMR is offering a similar resin kit now. Actually, It's kinda funny story as to how I came up with the Jeep pickup masters: In March of '96, as I was heading to the Toledo Toy Show on a Friday afternoon, passing through the tiny little town of Rockfield, Indiana, I spotted a Jeep pickup parked in a cow pasture on the edge of town. Making mental note of it, I drove on, and on the way back through Rockville that Sunday, I stopped along the road for a longer look. On my way to Parsippany two weeks later, I took my camera, and a notepad (Indiana SR 25 goes from Lafayette to Logansport, where I picked up US-24 all the way to Toledo -- to go on to Parsippany, I simply hit I-80 at Toledo, then reversed the process on the way home). Back to the pickup: I drove up to the farmhouse, and knocked on the door, answered by a young guy and his wife, who had just acquired the place from his grandfather. Getting permission to climb the gate into the pasture (and being assured that no livestock were gonna be there!!!) I walked over to the truck, and proceeded to do a full "walkaround" with my camera. Finally, after getting perhaps 20 pics of the thing (rusty, but solid), I took measuring tape in hand, and proceeded to get the dimensions I would need for the box, fenders, that sort of thing. All at once, out of the corner of my eye, there stood about 2000 lbs of black angus bull, and he didn't look at all happy to have me as a guest in HIS part of the world. I grabbed my camera from atop the front fender, and clutching camera, notepad and ballpoint, I stepped around the front of the truck, just as that bull buried his hard head (horns attached) into the passenger side door, denting it inward at least a couple of inches. Without so much as a wave goodbye, I hightailed it to the gate, up and over I went, as the critter charged after me--he must have taken a smart pill that morning, because he stopped short of the gate, with me on the other side. Ahh, the things a model car builder will go through to get the references needed, huh? Biscuitbuilder Quote Link to comment Share on other sites More sharing options...
PatRedmond Posted July 26, 2006 Share Posted July 26, 2006 OOF !! That must have been a bit scary.... :shock: Quote Link to comment Share on other sites More sharing options...
Zoom Zoom Posted July 26, 2006 Author Share Posted July 26, 2006 Gee Art; I could have told you of a much easier (and nicer) place to get reference photos, but it would require a ride on one of America's ten most scenic highways (according to MSN Travel and I would have to agree with them)...it's in Moose Pass on the Seward Highway that goes from Anchorage to Seward AK But of course you might have had a moose charge you, but... I'm having lots of fun w/this kit; and unlike many Speccast/Liberty models, the scale looks completely accurate. Quote Link to comment Share on other sites More sharing options...
BIGTRUCK Posted July 26, 2006 Share Posted July 26, 2006 Bob , I have this old pop machine you can redo for the bed of your '62 its 2 1/8th wide x1 1/4 deep x2" high . Its from a 1/18 th scale item but I'm sure its way smaller then that, if you want it for your build its yours , let me know I'll send it out to 'ya.... Quote Link to comment Share on other sites More sharing options...
Zoom Zoom Posted July 26, 2006 Author Share Posted July 26, 2006 Thanks Ken; my PU model is getting some lawn equipment for the bed. I had bought a stake bed version of the Jeep w/a lawnmower, rake, shovel, and gas can as accessories, and they're perfect for my model; that's how I remember it the last time I saw the Jeep, it was being used by my cousin to haul around yard equipment for his summer job cutting grass. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.