DrKerry Posted May 18, 2017 Share Posted May 18, 2017 (edited) I started this about twenty years or more. Started with a Revell Black Magic rig and added the AMT wrecker body to it. Stretched the frame, poorly back then!!! She was a little bent, re cut the frame and pulled it straight!! Frame is stretched about an inch and a half. Right now I'm working on getting chrome parts ready for re plating, frame is ready for paint, got a new set of rubbers for it thanks to Driptroit 71 (Brian), he sent a few Pete decals too that I didn't have for this too. I used to have a good supply of parts for rigs now I don't have anything extra so it's a little tough getting back into rigs and not having extra bits to play with!!! I'll build up a supply again though!!! At first I didn't know if I wanted to build this all weathered out, with the chrome worn off and tires that were rotted to no use and the stains in the bed area from getting wet here and there... But I've decided on bringing her back to show and shine!!! Not sure on color choices yet but leaning towards yellow or red so far... I know this isn't much for a starting photo but this is where it was left off from 20 plus years ago... Body is all stripped as is the chrome.... Now starts the rebuild... I haven't played with trucks in many years so if I'm doing something wrong please let me know!!!!!! Comments and criticism welcome!!! Edited May 18, 2017 by DrKerry Quote Link to comment Share on other sites More sharing options...
DrKerry Posted May 18, 2017 Author Share Posted May 18, 2017 I know I'll have to re hinge the doors on it as they're all broke and gone.... Not sure if I have hood hinges either, if anyone has some pics of those I can make a set easy enough!!! Quote Link to comment Share on other sites More sharing options...
gatorincebu Posted May 18, 2017 Share Posted May 18, 2017 Kerry, Glad to see you bringing this one back on the bench. Will be watching for updates . Be Well Gator Quote Link to comment Share on other sites More sharing options...
DrKerry Posted May 18, 2017 Author Share Posted May 18, 2017 Me too Marc, Been a looooonnnnggg time coming for rebuilding this ol' girl!!!! Quote Link to comment Share on other sites More sharing options...
gotnitro? Posted May 19, 2017 Share Posted May 19, 2017 I have a parts truck of this if ya find something missing let me know. I'm clearing out all the extra kit stuff that's accumulated over the few yrs. Clutter drives me nuts Quote Link to comment Share on other sites More sharing options...
DrKerry Posted May 19, 2017 Author Share Posted May 19, 2017 Pm sent Quote Link to comment Share on other sites More sharing options...
DRIPTROIT 71 Posted May 20, 2017 Share Posted May 20, 2017 Great project!! Looking forward to seeing more!! Quote Link to comment Share on other sites More sharing options...
DrKerry Posted May 20, 2017 Author Share Posted May 20, 2017 Thanks Brian, this pic shows kind of where I'm going with this build.... close to it with the lift and the boom...... not sure on the colors but...... Quote Link to comment Share on other sites More sharing options...
gatorincebu Posted May 20, 2017 Share Posted May 20, 2017 Kerry, You can get a diamond plate tool box like the one in the photo from AITM . They have several sizes up to a 4 ' box . might be just the thing for this build. Check the link below be Well Gatorhttp://www.aitruckmodels.com/ Quote Link to comment Share on other sites More sharing options...
DrKerry Posted May 20, 2017 Author Share Posted May 20, 2017 Kerry, You can get a diamond plate tool box like the one in the photo from AITM . They have several sizes up to a 4 ' box . might be just the thing for this build. Check the link below be Well Gatorhttp://www.aitruckmodels.com/Thanks for the info Marc, I'll have to check into it.... Quote Link to comment Share on other sites More sharing options...
disabled modeler Posted May 20, 2017 Share Posted May 20, 2017 That is going to be cool when done Kerry buddy. Quote Link to comment Share on other sites More sharing options...
DrKerry Posted May 20, 2017 Author Share Posted May 20, 2017 That is going to be cool when done Kerry buddy.I'm a hoping so!!!!! Quote Link to comment Share on other sites More sharing options...
Chariots of Fire Posted May 24, 2017 Share Posted May 24, 2017 Resurrecting an old build can be more rewarding that starting a new kit! Have fun with this one! Quote Link to comment Share on other sites More sharing options...
gotnitro? Posted May 24, 2017 Share Posted May 24, 2017 That's a great direction to take this project Quote Link to comment Share on other sites More sharing options...
DrKerry Posted May 24, 2017 Author Share Posted May 24, 2017 Thanks gents.... haven't posted a lot on it yet as all I've been doing is filling seams on the britework and getting the parts ready to go to chrome plating. Sending it off to George at GT KustomKrome, that and I've started work on the axle lift in the back. Using the idea of the permanent mounted Zacklift as a base for what I'm building.. Mount for the lift made new air tanks for under the truck. A bit longer than kit tanks. Used a ball point pen for the tank parts and the kit tank ends. These will be painted.... used a peice of tag wire for the mounting bands... inspiration..... Quote Link to comment Share on other sites More sharing options...
clayton Posted May 24, 2017 Share Posted May 24, 2017 Thanks Brian, this pic shows kind of where I'm going with this build.... close to it with the lift and the boom...... not sure on the colors but...... I started this build a number of time and all ways get off track. Quote Link to comment Share on other sites More sharing options...
DrKerry Posted May 25, 2017 Author Share Posted May 25, 2017 I started this build a number of time and all ways get off track.lol, I hear ya.... the pic is just a guide for me. Not totally following it. Just going to use ideas from it. My wrecker is going to be green and white.... Quote Link to comment Share on other sites More sharing options...
DRIPTROIT 71 Posted May 30, 2017 Share Posted May 30, 2017 Looks like a good start! Quote Link to comment Share on other sites More sharing options...
DrKerry Posted May 30, 2017 Author Share Posted May 30, 2017 Thanks Brian!!!!! Quote Link to comment Share on other sites More sharing options...
DrKerry Posted May 31, 2017 Author Share Posted May 31, 2017 Taking cab, bunk house,l and hood in to work tonight. Gonna do some sanding on my breaks!!!!! Also the bunk house will start going together tonight!!!!! It's slowly getting there!!!!! Quote Link to comment Share on other sites More sharing options...
jacobus Posted June 2, 2017 Share Posted June 2, 2017 great to see this , make a new start of a old build , renovation of a old build looks how you do thissome long time ago on this forum has somebody also make these wrecker [ renovation ] he has makin that one so nicefor my old wrecker i use that as guideline for the color he used [ when i give it a make over ]see how it go,sjacobus Quote Link to comment Share on other sites More sharing options...
DrKerry Posted June 2, 2017 Author Share Posted June 2, 2017 great to see this , make a new start of a old build , renovation of a old build looks how you do thissome long time ago on this forum has somebody also make these wrecker [ renovation ] he has makin that one so nicefor my old wrecker i use that as guideline for the color he used [ when i give it a make over ]see how it go,sjacobusthank you Jacobus, hoping mine turns out half as nice as some of these beautiful rigs I've seen on the Forum!!!!!! Quote Link to comment Share on other sites More sharing options...
DrKerry Posted June 4, 2017 Author Share Posted June 4, 2017 All the chrome bits have been stripped and sanded filled etc...... ready to be sent in for re chrominig!! Been working on the body parts getting them sanded and ready for primer.. they took a bath in the pond already!!!! Hood assembly, bunk house are together again. Working on cab right now and have to figure out a way to re hinge the doors on the cab!!!! Quote Link to comment Share on other sites More sharing options...
clayton Posted June 10, 2017 Share Posted June 10, 2017 (edited) I started off using the photo and ended up with this. It is a mix of amt and revell. Amt eng block modified for the eng bolt on parts from a revell.revell frame railes amt cross members modified too fit the revell railes. Revel sleeper. Other words 2 junk kits made into one. Wished I had used the wheel lift now. Edited June 10, 2017 by clayton More info Quote Link to comment Share on other sites More sharing options...
DrKerry Posted June 10, 2017 Author Share Posted June 10, 2017 I started off using the photo and ended up with this. It is a mix of amt and revell. Amt eng block modified for the eng bolt on parts from a revell.revell frame railes amt cross members modified too fit the revell railes. Revel sleeper. Other words 2 junk kits made into one. Wished I had used the wheel lift now. looks sharp Clayton!!!!!! What you did is kind of where I'm going too. I used the Revell chassis, cab, hood and bunk house. With the AMT wrecker body on the back.... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.