Warren D Posted February 19, 2020 Author Share Posted February 19, 2020 11 hours ago, gotnitro? said: Nice change !!!! I agree with your assessment about the kfs axle being 1/24 , I tried using it under my Oshkosh, the track was also wide. His website does specify scale, but I didnt realize it would be that dramatic. Your sag should certainly look spot on after a healthy load of logs are added ! I think it was worth the effort, I'm sure I'll like more as time goes by and I forget what apain it was to do. I think it's the scale difference but could also be that KFS is geared to Euro trucks (like AITM is geared to American trucks) and there may be some differences due to that. I had to narrow both sides, if I just did the long side, the diff would have landed in the center and it really needs to be offset to one side. Only one I've seen with a centered front drive axle is a center cab cement mixer. Not saying there aren't others, but that's the only one I've seen. I did notice the scale difference between 1/24 and 1/25 years ago when I tried taking 2 1/24 scale Chevy p/u beds and making a long bed. The cab I was using was 1/25 and that bed was ugly wide. Ended up taking a good chunk of width out of it to match the cab width. Some things don't matter as much, ie, the crane for this build is 1/24 but looks fine on a 1/25 scale truck and I don't recall having to make any changes to the crane's mounting channels for frame width. Quote Link to comment Share on other sites More sharing options...
Warren D Posted February 19, 2020 Author Share Posted February 19, 2020 11 hours ago, Bills72sj said: Wow! That much suspension and tires with that bit of a cab make me think it would be hard riding monster. Especially on logging roads. Not sure anyone really cares how a logger rides except maybe the driver. The large sidewalls on the tires should help! With all the mud, probably smoother than a paved road in pothole season!!! LOL! Quote Link to comment Share on other sites More sharing options...
Tesla Posted February 19, 2020 Share Posted February 19, 2020 With AWD and chains this beast is ready to conquer any logging road! Quote Link to comment Share on other sites More sharing options...
Hermann Kersten Posted February 20, 2020 Share Posted February 20, 2020 Very nice project, the details are awesome. The chains are a very patience job, i did it once with a semi tractor, needed a lot of pins to keep the chains in 1 place.? Hermann. Quote Link to comment Share on other sites More sharing options...
Warren D Posted February 20, 2020 Author Share Posted February 20, 2020 3 hours ago, Hermann Kersten said: Very nice project, the details are awesome. The chains are a very patience job, i did it once with a semi tractor, needed a lot of pins to keep the chains in 1 place.? Hermann. Thanks, I think I have about 2 hours invested in each wheel just for the chains. Not something I plan on doing again anytime soon. Quote Link to comment Share on other sites More sharing options...
DRIPTROIT 71 Posted February 21, 2020 Share Posted February 21, 2020 That thing looks like it really means business! Quote Link to comment Share on other sites More sharing options...
Hermann Kersten Posted February 22, 2020 Share Posted February 22, 2020 On 2/20/2020 at 6:06 PM, Warren D said: Thanks, I think I have about 2 hours invested in each wheel just for the chains. Not something I plan on doing again anytime soon. Here the same experience, and exactly the same thought.? Hermann. Quote Link to comment Share on other sites More sharing options...
gatorincebu Posted March 5, 2020 Share Posted March 5, 2020 Warren, I missed the beginning of this project. And as some one said "you got a pile of resin there " I have to ask out of shear curiosity. How much money have you got in this project ? I also use the grimy black or Nato black on my painted tires . And your look spot on ! Like the tires chains . But doubt I will ever go there . The conversion to all wheel drive is nice . I have a couple of projects that I intend to do that on . Nice work thus far ! Be Well Gator Quote Link to comment Share on other sites More sharing options...
Warren D Posted March 5, 2020 Author Share Posted March 5, 2020 13 hours ago, gatorincebu said: Warren, I missed the beginning of this project. And as some one said "you got a pile of resin there " I have to ask out of shear curiosity. How much money have you got in this project ? I also use the grimy black or Nato black on my painted tires . And your look spot on ! Like the tires chains . But doubt I will ever go there . The conversion to all wheel drive is nice . I have a couple of projects that I intend to do that on . Nice work thus far ! Be Well Gator Thanks. Well, you can add it up, B815 from AITM, Mack Chassis from AITM, AMT Logging trailer, Italeri Crane, chain material was about $50 so about $300 so far give or take. Quote Link to comment Share on other sites More sharing options...
Warren D Posted March 7, 2020 Author Share Posted March 7, 2020 Progress update: Cab is coming along, glass and interior are installed, also checked fit to chassis. Photos are mock ups, still some details to add before it gets mounted. I packed the front fender wells with mud, seemed to add a lot of extra weight to an already heavy resin casting. As I go, I keep finding more things to add. I really need to wrap this up soon, otherwise it might never get done! Chassis is also coming along, mud and rust added along with grease and oil. Fuel tanks and battery boxes are on and I had some room to add a step from the log trailer kit on the passenger side which still needs to get dirty. I've tried several methods for the mud. First was the well known use of baking soda as a filler/texture but by the time I got the texture I liked, there was too much baking soda and it turned the mix white requiring many coats of mud colored washes. I tried a blend of fine saw dust, acrylic paint ($.99 at the craft store) and some clear gloss as a binder. I like the results, the sawdust adds body and the fiber seems to go along with the logger theme. Next are the cab accessories, a few chassis details then the cab can get mounted. Biggest thing left after that will be the grapple for the crane. I think I see the end......until I find something else to add/change....sigh...... Quote Link to comment Share on other sites More sharing options...
CRUSADER2 Posted March 7, 2020 Share Posted March 7, 2020 Great work!!! its looking good, and an interesting build to follow. Quote Link to comment Share on other sites More sharing options...
Vince66 Posted March 8, 2020 Share Posted March 8, 2020 Turning out great Quote Link to comment Share on other sites More sharing options...
Tesla Posted March 8, 2020 Share Posted March 8, 2020 Looking real nice Warren ? Quote Link to comment Share on other sites More sharing options...
gotnitro? Posted March 8, 2020 Share Posted March 8, 2020 Expertly done Quote Link to comment Share on other sites More sharing options...
Warren D Posted March 12, 2020 Author Share Posted March 12, 2020 Getting close to calling this one done. Cab is done except for the crane, grapple is all that's left there. Quote Link to comment Share on other sites More sharing options...
blackbeard Posted March 12, 2020 Share Posted March 12, 2020 Great looking mack truck it looks like it's right at home in the mud Quote Link to comment Share on other sites More sharing options...
Tesla Posted March 13, 2020 Share Posted March 13, 2020 Can't wait to see it with the crane! Quote Link to comment Share on other sites More sharing options...
Vince66 Posted March 13, 2020 Share Posted March 13, 2020 Wow Quote Link to comment Share on other sites More sharing options...
larman Posted March 13, 2020 Share Posted March 13, 2020 Nice job! Growing up in the Lehigh Valley, I will always have a soft spot for B and R model Macks. Quote Link to comment Share on other sites More sharing options...
Warren D Posted March 17, 2020 Author Share Posted March 17, 2020 Final update. The grapple is almost done, need to attach it to the crane, add a little weathering and mount the crane and it's done. Not sure how some of you scratch build these small devices, it was very frustrating. Quote Link to comment Share on other sites More sharing options...
gotnitro? Posted March 17, 2020 Share Posted March 17, 2020 Your grapple looks fantastic! It will definitely add another dimension to your build Quote Link to comment Share on other sites More sharing options...
Tesla Posted March 17, 2020 Share Posted March 17, 2020 WOW! That grapple came out excellent! Job well done Warren ? Quote Link to comment Share on other sites More sharing options...
Warren D Posted March 18, 2020 Author Share Posted March 18, 2020 A few more pics of the grapple now mounted to the crane. It pivots, rotates, jaws work and moves like the real one. Quote Link to comment Share on other sites More sharing options...
Warren D Posted March 18, 2020 Author Share Posted March 18, 2020 Calling this one done. Thanks to all for the kind words of encouragement during the build! Quote Link to comment Share on other sites More sharing options...
gotnitro? Posted March 19, 2020 Share Posted March 19, 2020 Awesome job Warren ! Thanks for joining the BRBO also Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.