dsummone Posted June 28, 2022 Share Posted June 28, 2022 I picked up these 2 at a garage sale recently. The GTO is such a poor kit I’m going to just use it for parts (not many good ones of those) So while I’ve been waiting on the Dart, I thought I’d take a break from building my 1:1s and work on the Chevelle. It’s not a bad kit from what I can tell and has some possibilities. I set the stance where I wanted it and got busy with my favorite part… the power. Thanks for looking and please give comments. Dave 1 Quote Link to comment Share on other sites More sharing options...
bisc63 Posted June 28, 2022 Share Posted June 28, 2022 Nice engine details. Got any pics of your old ride? Quote Link to comment Share on other sites More sharing options...
dsummone Posted June 28, 2022 Author Share Posted June 28, 2022 1 hour ago, bisc63 said: Nice engine details. Got any pics of your old ride? I never had a Chevelle. This one’s just for fun, I thought I’d try polishing the body, something I haven’t tried yet. 1 Quote Link to comment Share on other sites More sharing options...
Monty Posted June 29, 2022 Share Posted June 29, 2022 I like where you're taking this. Hope you don't mind a tech nudge: the valve covers should be 3 up/ 4 down Should be an easy fix. 1 Quote Link to comment Share on other sites More sharing options...
dsummone Posted June 30, 2022 Author Share Posted June 30, 2022 7 hours ago, Monty said: I like where you're taking this. Hope you don't mind a tech nudge: the valve covers should be 3 up/ 4 down Should be an easy fix. Thank you. Quote Link to comment Share on other sites More sharing options...
dsummone Posted July 1, 2022 Author Share Posted July 1, 2022 Got the chassis painted and the drivetrain installed. This kit didn’t come with shocks and I didn’t have any so I made a couple. They don’t mount on the rear ended like stock but they’ll do. Ran the rear brake lines and the rear section of the fuel line ran, I’m not going to do a return fuel line and I used brass rod for the brake line above the rear ended because I had installed the differential first and the brass was easier to work with in the limited space. Figured out a way to run disks up front. I drilled op through the floor pan to try and simulate the fuel and brake lines running through one of the cross members. I’ve had the body painted with Testors flake green and went to try and rub it out and noticed one door was darker than the rest of the body… don’t know why unless I got a thicker coat right there but weird that it was only on a door. Anyway, I sanded it with 800 the 1500 and resprayed it, will see if it turns out, Luther wise I guess it’s going in the pond. Thanks for looking. Dave. Quote Link to comment Share on other sites More sharing options...
bisc63 Posted July 1, 2022 Share Posted July 1, 2022 Looking good. Quote Link to comment Share on other sites More sharing options...
dsummone Posted July 1, 2022 Author Share Posted July 1, 2022 48 minutes ago, bisc63 said: Looking good. Thank you. Got the valve cover issue corrected that Monty pointed out too. 1 Quote Link to comment Share on other sites More sharing options...
dsummone Posted July 1, 2022 Author Share Posted July 1, 2022 Color and clear is on. Now I’ll wait till next week to rub it out. Fingers crossed. Dave. 1 Quote Link to comment Share on other sites More sharing options...
espo Posted July 2, 2022 Share Posted July 2, 2022 The paint surface looks really smooth already. Popular color for that era as well. 1 Quote Link to comment Share on other sites More sharing options...
bisc63 Posted July 2, 2022 Share Posted July 2, 2022 Color looks NICE! 1 Quote Link to comment Share on other sites More sharing options...
slusher Posted July 5, 2022 Share Posted July 5, 2022 Paint looks smooth doesn’t look like it needs to be rubbed out.. Quote Link to comment Share on other sites More sharing options...
dsummone Posted July 7, 2022 Author Share Posted July 7, 2022 I used just a polish on the paint and think it looks okay. Got the foil on the window trim and door handles and set the body on top of the chassis… didn’t want to place it all the way down yet but it gives an idea of the finished look. I’ve been kicking around trying to use the white stripe decals that came with the kit, I really like that look but I don’t know if I want to risk messing up the paint. Thoughts? Dave. 1 Quote Link to comment Share on other sites More sharing options...
Pierre_tec Posted July 7, 2022 Share Posted July 7, 2022 Looking so good. Nice color choice, and the attention to details; amazing Btw i have been on that side that paint looks nice, and i know i can make it better, and then…..burn thru the paint and regret why i polish it 1 Quote Link to comment Share on other sites More sharing options...
espo Posted July 7, 2022 Share Posted July 7, 2022 This is a great looking build and very cleanly done. The mention of the factory stripes brings one thing to mind. The kits decals look good, but the white doesn't always cover well over this dark of a color. I suggest getting a second set of stripe decals. Using two layers of decals should prevent any green showing thru. Had this same problem on a build even with a lighter body color. 1 Quote Link to comment Share on other sites More sharing options...
dsummone Posted July 7, 2022 Author Share Posted July 7, 2022 5 minutes ago, espo said: This is a great looking build and very cleanly done. The mention of the factory stripes brings one thing to mind. The kits decals look good, but the white doesn't always cover well over this dark of a color. I suggest getting a second set of stripe decals. Using two layers of decals should prevent any green showing thru. Had this same problem on a build even with a lighter body color. Thank you for the tip. Quote Link to comment Share on other sites More sharing options...
dsummone Posted July 8, 2022 Author Share Posted July 8, 2022 Chevelle is coming to the end of the build. Still have the exhaust to do and touch up a couple areas. 2 Quote Link to comment Share on other sites More sharing options...
dsummone Posted July 9, 2022 Author Share Posted July 9, 2022 This was a great project, I thought the kits details were good and assembly went better than my others. The interior started really good but I used a satin clear on it and some of the black wrinkled. I used a Testors rattle can on it and I won’t be using anything from the hardware store on my bodies again, Testors or Tamiya until I can afford an airbrush… yes I’m hooked and have so many ideas for projects that I’m afraid my wife is going to kill me. Well thanks for looking and the comments, now I’m off to the GTX. Dave. 1 Quote Link to comment Share on other sites More sharing options...
bisc63 Posted July 9, 2022 Share Posted July 9, 2022 Looks VERY nice, but a couple of details stick out to me , probably just oversights from the excitement of finishing up! One; a drop of flat dark gray or black inside the exhaust tips would look a bit more real, and two: foil or Molotow on the gutters. Other than that, you've built a beautiful Chevelle, one to be proud of. 1 Quote Link to comment Share on other sites More sharing options...
dsummone Posted July 9, 2022 Author Share Posted July 9, 2022 9 hours ago, bisc63 said: Looks VERY nice, but a couple of details stick out to me , probably just oversights from the excitement of finishing up! One; a drop of flat dark gray or black inside the exhaust tips would look a bit more real, and two: foil or Molotow on the gutters. Other than that, you've built a beautiful Chevelle, one to be proud of. You’re right, I forgot the exhaust tips and the gutters do need to be done. 1 Quote Link to comment Share on other sites More sharing options...
dsummone Posted July 10, 2022 Author Share Posted July 10, 2022 Now she’s done. 1 Quote Link to comment Share on other sites More sharing options...
Slotto Posted July 10, 2022 Share Posted July 10, 2022 Super clean. 1 Quote Link to comment Share on other sites More sharing options...
bisc63 Posted July 11, 2022 Share Posted July 11, 2022 Very cool. Also, kudos on the "Stripe delete" option. Not a belly button car now. 1 1 Quote Link to comment Share on other sites More sharing options...
Crager Posted July 11, 2022 Share Posted July 11, 2022 Nice build! Great engine detail! I'm always on the fence with decals. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.