CrazyGirl Posted April 18, 2013 Share Posted April 18, 2013 what can anyone tell me about this kit Thanks Quote Link to comment Share on other sites More sharing options...
espo Posted April 18, 2013 Share Posted April 18, 2013 You get the tree build options on the box art. The "wagon" roof has a clear plastic sun roof as I recall. Remember this is a 60's - 70's kit with the screws holding the chassis and metal axles thru the engine and all. But it was a very good kit at the time and the body proportions are good as is the interior. You can build a very nice model out of it, but know what you are starting with. Quote Link to comment Share on other sites More sharing options...
CrazyGirl Posted April 18, 2013 Author Share Posted April 18, 2013 Dave , is there another chassis I can use that you know of , with a separate frame Quote Link to comment Share on other sites More sharing options...
espo Posted April 18, 2013 Share Posted April 18, 2013 You might have to look around in your leftover parts boxes. You can work with what's their depending on the level of detail your going for. If it's something you like I would get it. It's a good kit, just not of todays standards. I built a black sedan when this was new. Looked good. Quote Link to comment Share on other sites More sharing options...
CrazyGirl Posted April 18, 2013 Author Share Posted April 18, 2013 Dave would you know if the 68 Lincoln is more updated as far as the chassis and all ?? Quote Link to comment Share on other sites More sharing options...
espo Posted April 18, 2013 Share Posted April 18, 2013 I don't recall ever seeing one. This isn't a bad kit, you might be surprised by how good it would look with a little extra effort. Quote Link to comment Share on other sites More sharing options...
CrazyGirl Posted April 18, 2013 Author Share Posted April 18, 2013 Thanks Derick ,,, I see I will need to find a donor chassis , the rear end axel tubes are like from a Mack Truck Quote Link to comment Share on other sites More sharing options...
Eshaver Posted April 18, 2013 Share Posted April 18, 2013 Anne , I dunno why you dis like the chassis of that car, the real ones were the same as the model. That was pretty much the very last car ever built within it's size to use Unitized construction. You could I suppose go and open the trunk area as the top stowed under it . Seven relays , three miles of 12 ga wire operated the convertible top on those cars . The 430 E L engine was painted all Black as was the entire engine compartment . I was working in a Mercury dealer at the time . Oh let me tell ya , when the top DID malfunction , it was a really " bigg Exceterin " sized headache . As for the kit parts , they go together well and one shouldn't see any assembly problems . Quote Link to comment Share on other sites More sharing options...
sfhess Posted April 19, 2013 Share Posted April 19, 2013 (edited) Closest similar detailed chassis would be the AMT 62 Thunderbird. It would probably need to be stretched a bit. These cars were both unit bodies, developed together, using shared components. These days you would say they share the same "platform". Edited April 19, 2013 by sfhess Quote Link to comment Share on other sites More sharing options...
High octane Posted April 19, 2013 Share Posted April 19, 2013 I needed the hardtop body for a future project so I picked one up fro Missing Link a few years ago and it's still sittin' on the pile with a lot of other future builds. LOL! I also have the above mentioned kit to use as a donor. Quote Link to comment Share on other sites More sharing options...
ToyLvr Posted April 20, 2013 Share Posted April 20, 2013 I have both the '65 reissue, and an original '68 Continental (and a '61 and a '62, but who's counting). I agree - the '65 is a fine kit when you consider the era it came from. The '68 which I have also has the old style chassis. It has a funky option - can be built as a "Town Car", a *real* town car with the roof removed over the driver's area, as in the case of the classic town car limousines of the 30s. Quote Link to comment Share on other sites More sharing options...
CrazyGirl Posted April 20, 2013 Author Share Posted April 20, 2013 oh the 62 Bird chassis huh , I have that kit and when the Lincoln gets here i'll check it out and if it looks like I can do it i'll egt another t-bird , Thanks ! Quote Link to comment Share on other sites More sharing options...
72 Charger Posted April 20, 2013 Share Posted April 20, 2013 (edited) Anne Im building a 65 at the moment so far its been problem free ! There are a few sink spots on the body there are two on the trunk and some around the hood and front fenders . If your trying to be more accurate then you will have to move the hood orniment to the hood and not on the body and the hood hinge is wrong to here is some pics Edited April 20, 2013 by Doobie Quote Link to comment Share on other sites More sharing options...
Guest Posted April 20, 2013 Share Posted April 20, 2013 Molded in chassis details can be painted to look nice. In fact, a simple build like that on occasion is a nice respit from the mega detailed stuff we usually do. Quote Link to comment Share on other sites More sharing options...
Nxr Posted April 20, 2013 Share Posted April 20, 2013 I have the Prestige issue from the 80s of this kit, its very nice and i like the way older kits are packaged. Quote Link to comment Share on other sites More sharing options...
Jantrix Posted April 20, 2013 Share Posted April 20, 2013 BTW, I'm in need of a chassis for this if anyone has one for trade. Quote Link to comment Share on other sites More sharing options...
Erik Smith Posted April 20, 2013 Share Posted April 20, 2013 Chassis detail is rarely seen on a shelf or contest table - nobody picks up a model at a show, so unless you display it, the molded in detail doesn't matter so much. As stated above, some detail painting on the chassis and it will look good. Plus it's really easy to adjust ride height - just drill new holes. I would concentrate more on a stellar paint job and clean construction than worrying about a detailed chassis for the Lincoln kit. There was a WIP with the wagon conversion on the forum a while back... Quote Link to comment Share on other sites More sharing options...
Tony N Posted April 20, 2013 Share Posted April 20, 2013 The Thunderbird may be to small, I would try the 66 Ford Galaxy it is a full size car. Lots of great parts in the kit. Tony Quote Link to comment Share on other sites More sharing options...
MrObsessive Posted April 20, 2013 Share Posted April 20, 2013 I believe the '66 Ford was a full body on frame car, while the '65 Lincolns and T-Birds were unit construction. The floorpan out of the '62 T-Bird would be the better way to go as they did not change much from '61-'66. Of course you'd need to lengthen the floorpan as someone mentioned, but you'd have all the detail you'd want. Quote Link to comment Share on other sites More sharing options...
george 53 Posted April 20, 2013 Share Posted April 20, 2013 Gotta agree with Bill on this one! The T-Bird's chassis is EXACTLY what you'll need if your looking for accuracy. It has a totally seperate front and rear suspension set up, and just flat out looks better. Quote Link to comment Share on other sites More sharing options...
Tony N Posted April 20, 2013 Share Posted April 20, 2013 O.K. I check the two chassis and Bill and George are right the Thunderbird is a better choice. The 66 Ford Galaxy has a frame. I took a picture of the 65 Lincoln and the 62 Thunderbird and they are both unbodied not a full frame. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.