Bernard Kron Posted January 7, 2014 Posted January 7, 2014 (edited) AMT Chopped ’36 Ford 3-Window Coupe done Retro-Mod street-rod style(More pictures below) Un-written law of auto modeling No.9 says that when, at last, you have acquired all the parts and/or skills to replicate a long-out-of-production kit, said kit will be re-issued, usually just as you are engaged in executing your project or, if the fates are kind, shortly thereafter (so you can claim bragging rights…). Such is the case for what was intended to be an end-of-2013 project, an AMT chopped-top 3-window coupe which, because I knew that the first re-issue in many years of the early 60’s 3-in-1, including all the genuine parts which have been omitted from the kits for nearly 50 years, such as the fender skirts, the chopped top and much more, was due out right about the time I would finish this project up. I decided rather than replicating the classic custom or race car from the original kit I would use on of the after-market re-pops of the original kit top to build a modern rod, a blend of details from various periods across the decades since the kit was first released, what I am coming to call “Retro-Mod”, using period parts and more contemporary engineering and design cues. The chopped top was purchased on eBay, a very nice high-quality resin casting from vendor “rdsxfan2”, fairly priced and delivered promptly. The contemporary design cue comes courtesy of a set of pseudo-Halibrand mag wheels from a Revell “Goodguys” ’32 Ford Highboy Roadster, stripped of their chrome and finished with Testors Acryl Jet Exhaust paint, a nearly perfect match to the classic Dow 7 anti-corrosion coating used on Halibrand magnesium wheels in the 50’s and early 60’s. The project was intended to be a quick build so most of the car had been built from the commonly available AMT ’36 Ford Convertible street rod kit. I decided to use the big Pontiac V8 that dates all the way back to the original release, with the competition 6-pack carburetion. I was able to use the accessory belt drive intended for the tri-power variation by substituting an alternator from the Revell Deuce Highboy kit. Other than the chopped top the body work is largely stock with the production grill and hood ornament and no fender skirts. To show off the big Poncho mill I omitted the hood panels. Aft of the engine compartment the body has been shaved and decked. The car is bumperless so the bumper slots have been filled front and rear. To show off the dramatic rear deck I decided to hang the license plate from the chassis instead of on the valance or deck lid. The stance of the car is was created by using an AMT ’40 Ford dropped axle, chosen because it comes chromed – it is largely identical to the ’36 Ford dropped axle that comes in the kit – and modified to take a pair of disc brakes pinched from a Revell Tony Nancy Double Dragster kit. The front spring was shaved as was the front cross member for a total additional drop of around 3 scale inches. Finally, a little “rubber rake” was accomplished by using Revell Deuce Highboy rear tires along with the ubiquitous AMT Firestones at the front. I chose the AMT ‘stones rather than more modern, smaller front tires because of the way they filled the wheel openings. The rear axle is the kit axle modified to take a pair of front disc brakes from the Revell Deuce Roadster kit. Both the front and rear axles are located by radius rods, again sourced from the Revell Deuce kits. Lastly, a quickie tuck ‘n’ roll job was done on the interior by using some Evergreen Plastic sheet siding in the appropriate width of corrugation. Quilted bucket seats of unknown origin from the depths of my parts box create a 70’s note. The dashboard had the old fashioned accessory lamp removed and the glove box filled and an additional gauge added to the center where the radio would be. Colors are Testors Acryl British Crimson and black with a body color dash. The steering wheel is from the ever-present Revell Deuce. Paint is Duplicolor Toreador Red Metallic over Duplicolor Red Oxide primer with Duplicolor Universal Black fenders. I had originally intended to give the main body a suede finish using Testors Dullcote but when the gloss came up nicely I kept it. But, unfortunately, on December 30th, 2013, while doing some final finishing and foiling the color came up off primer coat in various places and I landed up having to repaint the body. So what was intended to be my last completion of 2013 became my first one for the New Year. As far as I know the AMT ’36 Ford 3-in-1 reissue still isn’t in the stores… Thanx for lookin’,B. More Detail pics including the now obligatory see-through shot… Edited July 23, 2017 by Bernard Kron
Bernard Kron Posted January 7, 2014 Author Posted January 7, 2014 (edited) More Detail pics including the now obligatory see-through shot… Edited July 23, 2017 by Bernard Kron
Porscheman Posted January 7, 2014 Posted January 7, 2014 (edited) Sweet!!! I remember getting these kits when I was a kid. Does that mean I'm old? Edited January 7, 2014 by Porscheman
Danno Posted January 7, 2014 Posted January 7, 2014 Great looking rod, Bernie, but I'm gonna wait for the Reader's Digest version of the write-up.
krazyglu Posted January 7, 2014 Posted January 7, 2014 Very cool Bernard, I like the color combo on this combined with the wheel color I think it's different and works well. The engine looks very good, as does your see through shot.
Jantrix Posted January 7, 2014 Posted January 7, 2014 Nice! Where did the intake/carbs and air cleaners come from?
Bernard Kron Posted January 7, 2014 Author Posted January 7, 2014 (edited) Thanx everyone, for all the compliments. As always, I'm glad when one of my models can make a connection. I've never been able to put my finger on it, but these old AMT hot rod kits have so much "soul", they really capture the feel of the era when they were released. There were 2 '36 Ford 3-Window kits released at about the same time in the early 60's, one from Monogram and one from AMT. Both are real classics and have been re-issued in various ways many times. They're remarkably similar kits, with an open top option and lots of Old School customizing parts. IMHO, the Monogram kit is technically superior, with crisper details, a much nicer chassis and motor, and even some more interesting period customizing options (for example the LaSalle grill). But the chop and overall look of AMT is just amazing with a tough, agressive vibe that I tried to enhance in this build. Revell made a big mistake by not including the chopped top option in the recent re-issue. Having all three tops options will ensure the Round2 re-issue is a smash hit, IMHO. Great looking rod, Bernie, but I'm gonna wait for the Reader's Digest version of the write-up. Oh c'mon Danno, you just know you're missing out on some deep philosophical insights if you don't read it! (It does go on a bit, don't it...) Nice! Where did the intake/carbs and air cleaners come from? They're the competition setup from the original kit and also in various re-issues over the years. They'll be included in the upcoming Round2 release, I'm sure. Edited January 7, 2014 by Bernard Kron
krazyglu Posted January 7, 2014 Posted January 7, 2014 Oh Bernard you know we love your history lessons/short stories...haha I sure dig 'em anyway.
Bernard Kron Posted July 23, 2017 Author Posted July 23, 2017 Broken Photobucket links repaired. For now I'm only updating completed model pics. Updating w.i.p. links is just too huge a task! I'll update them on request...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now