Belugawrx

UPDATE,...UPDATE,.... Finally got my stuff out of lock-up,... and set it up Feels good to be able to spread out again Cheers

Nice job so far Tim.... This shows dipstick location,...driver's side, right behind the Pos. Batt. cable,...this one looks polished Cheers

Whoa ! I am left speechless by the stupidity

Thanks Dale I tried the gold,...Nope Finished sanding it 1000 - 2000 wet going into the booth for another shot of the yellow,... Then Future I'll be back Cheers

Ok.... Teenage Head Let's Shake Check 'em out !!

"Clean as a whistle smellin' like a rose"

Or they don't hit the bottom pin mount properly I drive country roads,..alot and I come across that all the time

Yep Another coat, I think, and then clear it. I do have a bit of gold fine metal flake I'm going to try on a spoon first Update tamara Thnx Carl Cheers

And , I just noticed thanks to digipho I have the mirror upside down ,..on the wrong side,.....ok, back at 'er

Here's another one back from the dead,...or stalled,.. I wasn't happy with the black stripe on the lower body,...tried sanding it out,..didn't clear it before the black,.. couldn't strip it for fear of loosing all the bondo/squadron white filler I had put on it so,.... Hit it one more time with a close yellow Acrylic,...and, ok it needs sanding and ,....yeah maybe one more coat,...but it's gettin' there spent some time doing interior ...stock....for some reason AMT/ERTL had two clocks? molded into the GPS driver interface. So I installed a piece of pkg. plastic,Tamiya smoked into the opening screen,..? Gauges are cutouts from Detail Master Tach parts,..Cleared with Tamiya Clear gloss and washed with Tamiya clear red,.. Engine bay still needs work,... Had to sand some bolt heads down to close the hood,.... Got the undercarraige close to done, and wheel/tires mounted... Had to cut off the kit spindles and drill for wire to take tube to take Pegs,.........yada .... OMG that was touch and go for abit Anyway,..trying to clear the bench, and this is just another step (baby) Thanks for looking and of course Q, C,+ C's are welcome Cheers

There is alot of info here on the site just type into your browser... modelcarsmag.com spray booth notice this space I would like to give you more info ,...but that topic has been done to death also you can use this search line for anything on this site. Good luck,.....don't make mama mad Cheers

Sounds like I'll save 30.$ and stick with this,.... Thanks for the review Cheers

Hey Alex I just wanted to let you know, that alot of us enjoy watching Pocher builds from start to finish,... the detail that can be brought down to 1:12,..1:16,...1:20,...1:25/24,... so much to see at this scale. That yellow/black insulated wire you are using for spark,..where did you harvest that? Looking great Cheers

.........where's the girls at?................. Strip it all,... and do over

ooooo that '70 Impala...... Cheers

Lookin' good Joe! Cheers

Nice choice Dom

I guess not enough for a 2000.$ Tat

Nice choice Tom Voltare s are the epitome of sleeper

I just started back into the hobby about 2 years ago and my best finds are thru Kijiji here in Canada,.... I don't know what the similar U.S. Site would be, but people put up stuff for sale in your area.....you meet them and pay them directly. Not eBay way too much $.... I've been buying case lots of AMT , MPC, Johnny lightning kits....10 models for 50 - 60 bucks.... Mostly unbuilts mostly older, mostly cra.... but it's the building that teaches. Check your local flea / antique consignment shops. Loads of stuff out there Cheers

Awesome looking car,.. when was that released? Nice start Cheers

Well since everything is molded into the frame,.... You may have to remake the whole thing,... This is one of those kits that you may just want to make it as is ,..and get a newer mold kit to try out customization on,... just sayin' Cheers

I remember that from christmas time Very cool pic