NoobModeller

Had some issues with uploading the images in their correct order so here it is from Imgur lol. http://imgur.com/a/8jsvw

Yeah it does, it comes with LHD and RHD and the Type R sprue tree has another dashboard which is only RHD. Seem to be having a problem uploading additional images lol. Anyone else?

Hi all, So the 1966 Chevy Nova project has been put on hold till I can get to a shop to get more body paint (lesson learnt with the EK9 project, more on that in just a bit). So I decided to take the Fujimi EK9 kit for a quick build into a Spoon Civic look, it's not quite finished yet but made so many mistakes on the way too. Problems and Bad stuff: - Only had one small can of yellow body paint and the body could have done with another 1-2 wet coat before I sealed it with clear - I then attempted to mask and paint the black accents on the window trims on the clear plastic and turns out using painters masking tape instead of something like Tamiya tape, I had runs and leaks so had to wash that off and not as clean windows - Just general small bits of paint blemishes on the body, you'll see Anyway, after all that I am still quite happy how it's turned out given what happened lol. After the final coat of clear and polished using Novas 1 and 2 More on the interior bucket in the next post.

So rather than finishing the Grumpy's Toy kit - I ended up getting the following things today: - Fujimi EK9 - 30 dollars worth of aftermarket wires, hoses and distributor kits - Tamiya Austin Mini - Couple more spray paints Lol. This is too addictive.

Another Aussie. Welcome mate.

I feel the same way! Lol. Incase you needed an excuse to buy more models, the Hobby and Toy fair is on this evening at Granville, I was going to go but I have no cash and will just end up being disappointed I can't buy anything lol. http://www.sydneymodelautoclub.com/#SWAPMEET

Hey mate, another one from Sydney too here.

The cutting and gluing sounds like the back wheels won't move. I might have to go down the larger rod path, I went to my local hardware store and you'd be surprised how hard it was to try and find 1mm thick rods ..who knew! I might have to Macgyver my way through this, thanks for the tips! Here's another picture for you all.

Some more progress for you guys, annoyingly though the 1mm metal rod provided to couple the back wheels together is too short which makes it impossible to add either the drag or stock tyre for the back. But any here some more photos

Oh man, that is one wicked paint job mate. Amazing!

So I screwed up (again) on the dashboard as I wanted to change colour scheme and left the plastic for a little too long trying to get paint off it and affected the hardness of the plastic, so anyhow ordered a replacement off eBay and ordered the gauges from Best Model Car Parts as well while I was it and they both arrived today. So yeah, will be busy in next couple of days Also decided to just do a bit of dry fitting to decide whether I wanted it lowered or not lol

I was thinking about it, but was going to see how the colours play out. I was planning on building Grumpy's Toy, but decided I wanted to build it semi-drag.

Looks ok, just in some areas, spray didn't quite get to, so I went over with a brush with Tamiya matt black acrylic and you can notice the different in layers of paint, I might leave it and try to weather it slightly with some dirt etc, see how it turns out. Any made some more progress; first time applying alot of these techniques, i.e. flocking, distributor wire, panel line using washers, all in good fun and a learning experience I've decided on a colour scheme, I am going to go metallic blue exterior and interior use the stock one seat piece for both front and back seats and go with a blue and grey upholstery. Taking my inspiration from here: http://www.hotrod.com/articles/readers-ride-1966-chevrolet-nova/

Thanks! Bit hard to source MAD stuff here in Australia, usually the postage makes it not worthwhile. I've now gone and done a rookie mistake, late night wasn't thinking and just wanted to quickly do something on the kit and ended up spray painting matt black on the under carriage without any primer. Would there be any adverse effects if I just prime it over the top and sand it down necessary and spray again?